AMC iLive 1 Wireless Microphone System User Manual

: June 25, 2024
: AMC

Table of Contents

Safety instructions
Before you start
Operation
Specifications
Read User Manual Online (PDF format)
Download This Manual (PDF format)

User Manual
iLive 1 Wireless microphone system AMC iLive 1 Wireless Microphone
System

Safety instructions

When using this electronic device, basic precautions should always be taken, including the following:

Read all instructions before using the product.
Do not use this product near water (e.g., near a bathtub, washbowl, kitchen sink, in a wet basement or near a swimming pool etc).
Use this device when you are sure that microphone has a stable base and it is fixed securely.
This product, in combination with loudspeakers and amplifier may be capable of producing sound levels that could cause permanent hearing loss. Do not operate for a long period of time at a high volume level or at a level that is uncomfortable. If you experience any hearing loss or ringing in the ears, you should consult with otorhinolaryngologists.
The product should be located away from heat sources such as radiators heat vents, or other devices that produce heat.
The product should be connected to a power supply that is described in the operating instructions or are marked on the product.
The power supply should be undamaged and never share an outlet or extension cord with other devices. Never leave device plugged into the outlet when it is not being used for a long period of time.
Care should be taken that objects do not fall into liquids and liquids would not be spilled on the device.
The product should be serviced by qualified service personnel if:
– The power supply or the plug has been damaged.
– Objects have fallen into or liquid has been spilled on the product.
– The product has been exposed to rain.
– The product has been dropped or the enclosure damaged.
There are some areas with high voltage inside, to reduce the risk of electric shock do not remove cover of the microphone receiver or power supply. The cover should be removed by the qualified personnel only.

CAUTION| To reduce the risk of electric shock, do not remove screws.
No user-serviceable parts inside. Refer servicing to qualified service personnel. To reduce the risk of fire, electric shock or product damage, do not expose this apparatus to rain, moisture, dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus.
---|---
RISK OF ELECTRIC SHOCK
DO NOT OPEN

Before you start

True diversity wireless microphone systems with 32 selectable channels and automatic channel targeting.
iLive1 wireless microphones sets are combined with handheld or body pack transmitter with variety of microphone selection to use with body pack.

FEATURES

True diversity receiver
32 selectable channels
Automatic channel targeting ACT synchronization
ASF automatic frequency selection
High brightness LCD display
RF, AF level meter
Digital volume and squelch control
Lock menu function
Battery level meter
Handheld microphone with LCD display
RF power selector for battery life saving mode or working distance range increase
Excellent quality metal body microphone equipped with dynamic cardioid capsule
Body pack transmitter with LCD display, channel, frequency and low battery indications
Balanced XLR connector and unbalanced 6,3mm TS jack line-level connector outputs. Jack/Jack cable included

Operation

Front Panel

SYNC button
Navigation buttons
SET button
LCD display
IR transmitter
Power switch

Rear Panel AMC iLive 1 Wireless Microphone System - Rear
Panel

Antenna A connector
Audio output
Main power connector
Antenna B connector

Handheld microphone

LCD display
IR receiver
Power button
RF power selector
Battery holder
Battery cover

Body pack

Antenna
LCD display
IR receiver
Battery cover lock
Battery holder
Battery cover
Power button
Microphone connector

Receiver operation
SYNC BUTTON
Press this button to transmit data from receiver to transmitter in order to synchronize microphone or body pack transmitter and receiver.
NAVIGATION BUTTONS
These buttons are designed to navigate receivers menu and adjust settings.
SET BUTTON
Short press of this button shows number of current channel for two seconds on LCD screen if channel frequency are displayed for default and otherwise, shows the channel frequency if channel number are set for display default. Long press brings menu on the screen, in order to enter the submenu press SET button one more time. Use navigation buttons to navigate menu or adjust settings.
LCD DISPLAY
Displays the current settings, menu and other information, like RF level, AF level, volume, frequency or channel, lock status, mute status and which antenna A or B is active at the moment.
IR TRANSMITER
IR transmitter allows synchronize microphone or body pack and receiver by establishing handheld microphone or body pack radio frequency to the same as the receiver.
POWER SWITCH
Press power switch for 3 seconds to turn on/off the power.
ANTENNA CONNECTOR
This connector designed to connect antenna to the receiver.
AUDIO OUTPUT
Balanced microphone level XLR / Unbalanced line level 6,3mm Jack audio output.
MAIN POWER CONNECTOR
Connector for DC 12 V – 16 V 1.25A power supply.
Handheld microphone operation
LCD DISPLAY
Displays the current frequency, channel and transmitter’s battery level.
IR RECEIVER
IR receiver collect data in order to set transmitters frequency and channel.
POWER BUTTON
Press power button for 3 seconds to turn on/off the power.
POWER SWITCH
Press power switch for 3 seconds to turn on/off the power.
ANTENNA CONNECTOR
This connector designed to connect antenna to the receiver.
AUDIO OUTPUT
Balanced microphone level XLR / Unbalanced line level 6,3mm Jack audio output.
MAIN POWER CONNECTOR
Connector for DC 12 V – 16 V 1.25A power supply.
Handheld microphone operation
LCD DISPLAY
Displays the current frequency, channel and transmitter’s battery level.
IR RECEIVER
IR receiver collect data in order to set transmitters frequency and channel.
POWER BUTTON
Press power button for 3 seconds to turn on/off the power.
IR RECEIVER
IR receiver allows synchronize body pack and receiver by establishing body pack radio frequency to the same as set in receiver.
BATTERY COVER LOCK
Push cover lock in order to remove battery cover.
BATTERY HOLDER
Battery holder for two pieces of AA sizes alkaline batteries. Pay attention to battery polarity, wrong polarity can damage transmitter!
BATTERY COVER
Remove battery cover in order to insert or replays batteries.
POWER BUTTON
Press power button for 3 seconds to turn on/off the power.
MICROPHONE CONNECTOR
Balanced XLR and unbalanced 6,3mm Jack audio output.
Synchronization
Press infrared data transfer button (SYNC) to transmit data from receiver to transmitter in order to synchronize microphone and receiver radio frequency. AMC iLive 1 Wireless Microphone System -
Synchronization The distance between the devices should be proximally 20cm. IMPORTANT: During synchronization IR receiver and IR transmitter should be directed to each other.
ASF FUNTION
To activate ASF (auto frequency selection) press the navigation button for 3 sec. This function will find free channel in frequency range, it helps more easily synchronize transmitter and receiver. After ASF functions finds the free channel, please use SYNC button to synchronize receiver and transmitter. Receiver’s menu
Long press of SET button brings main menu on the screen, in order to enter the submenu press SET button one more time. Use navigation buttons to navigate menu and adjust settings. DISPLAY MENU
Display menu allows to change the default screen view from frequency to channel and otherwise. Select “CHANNL” to display channel number in the screen or select “FREQUE” to display channel frequency in Mhz. TUNE MENU
Select tune menu in order to change receiver’s frequency in 50 kHz steps manually. If receiver is set to TUNE mode – AFS functions is disabled. In order to activate AFS, CHANNL mode should be selected in main menu. CHANNEL MENU
Select CHANNL to set one of the 32 channel’s presets. Before the selecting CHANNL, the default display in the DISPLY menu should be set to CHANNL. SQUELCH MENU
The squelch level is adjustable in 5dB steps from 0dB to 20dB. Selecting a smaller value increase the squelch threshold, selecting a higher value reduce the squelch threshold. If the squelch threshold is set too high, the microphone working distance can be reduced. VOLUME MENU
Select VOLUME menu to adjust audio output level. If receiver is set to volume adjusting mode – AFS functions is disabled. In order to activate AFS, CHANNL mode should be selected in the main menu after volume adjusting. EXIT MENU
Select to exit from menu. LOCK MENU
Lock menu allows lock main panel buttons, except power and SETTING buttons.
Please set lock function to off, for unlock.

Specifications

GENERAL

iLIVE 1 receiver

The specifications are correct at the time of printing this manual.
For improvement purposes, all specifications for this unit, including design and appearance, are subject to change without prior notice.