Nomadelic 24450 Waterproof Bluetooth Speaker Loud Instructions
- June 25, 2024
- Nomadelic
Table of Contents
Portable speaker
Loud 705
24450, 24451
Overview
- Braided lanyard
- Power on/off/mode
- Play/pause/TWS
- Charging port
- 3.5 mm AUX port
- Braided lanyard
- Power on/off/mode
- Play/pause/TWS
- Charging port
Specifications
| Bluetooth: | 5.0 (10 m) |
|---|---|
| Frequency range: | 80 Hz–20 kHz |
| Output power: | 5 W RMS/8 W peak |
| Input, charging: | DC 5 V/1 A |
| Playback time: | Up to 10 h (at 50% volume) |
| Weatherproof: | Yes, IPX7 |
| Ports: | 3.5 mm AUX in, USB-C |
| Wireless frequency: | 2402–2480 MHz |
| Transmission power: | 20 mW (Max.) |
| Included in the box: | Loud 705 Bluetooth speaker, USB-C charging cable (50 |
cm), quick guide
Before first use
Charge the speaker fully before using it for the first time.
Use
Charging
Lift the lid protecting the connections on the side of the speaker. Connect
the USB-C cable between the charging port (4) and a USB charger (sold
separately). Connect the USB charger to a wall socket. The battery indicator
(6) lights up red during charging, and
turns off when the speaker is fully charged.
Power on/off
Press and hold the power button (2) for 3 seconds to turn on the speaker. The
Bluetooth indicator (9) lights up, flashes white, and the speaker
automatically enters pairing mode.
Press and hold the power button (2) for 3 seconds to turn off the speaker.
Note! The speaker turns off automatically after 10 minutes or it is not
connected to a Bluetooth device.
Pairing
Turn on the speaker, the Bluetooth indicator (9) lights up white and flashes.
Activate Bluetooth on your smart device. Search for nearby Bluetooth devices
and select “Nomadelic Loud 705” in the list. A sound from the speaker notifies
you when the pairing is successful and the Bluetooth indicator shines with a
solid light.
The speaker automatically connects to the last paired smart device the next
time it’s powered on.
Press and hold the Volume + and – buttons ( 7, 8) at the same time for 2
seconds to disconnect the currently paired Bluetooth device.
Control music and calls
You can control the playback of music and calls with the buttons on the
speaker.
Play/pause music/answer/hang up call: press the Play/pause button (3).
Volume -: press the Volume – button (8).
Previous track: press and hold the Volume – button (8).
Volume +: press the Volume + button (7).
Next track: press and hold the Volume + button (7).
Change between Bluetooth and AUX source: press the Power/mode button (2).
Reject incoming call: press and hold the Play/pause button (3) for 2
seconds.
TWS connection
The speaker supports True Wireless Stereo (TWS). With TWS you can pair, and
play audio from, two speakers at the same time.
Note! The speakers cannot be separated more than 10 meters for the TWS
function to work. TWS only works with two of the same model speak- ers
(Nomadelic Loud 705). The TWS mode is only available when using Bluetooth as
the audio source.
- Turn on both speakers. Make sure none of them are connected to a smart device via Bluetooth.
- Press and hold the Play/pause/TWS button (3) for 2 seconds on the speaker you want to use as the primary speaker. The speaker emits a short sound to indicate TWS mode is active. Release the TWS button.
- The speakers pair automatically together after a few seconds. The speakers are now set up in stereo configuration where the Bluetooth indicators (9) light up with a solid white light for the right channel, and flashing white light every 3 seconds for the left channel.
- Activate Bluetooth on your smart device. Search for nearby Bluetooth devices and select “Nomadelic Loud 705” in the list. A sound from the speakers notifies you when the pairing is successful.
Any music you play on your Bluetooth connected smart device is now played on
both speakers simultaneously.
To disconnect the speakers from TWS mode, press and hold the Play/ pause/TWS
button (3) on one of the speakers for 2 seconds; a sound is emitted when the
disconnection is successful.
3.5 mm AUX
Connect an audio cable between the 3.5 mm AUX port (5) and your device. The
speaker automatically disconnects any currently connected Bluetooth smart
device. You can switch to the 3.5 mm AUX mode by pressing the power button
(2).
Troubleshooting
Problems with Bluetooth connection.
Make sure that the speaker’s built-in battery is fully charged, the speaker is
turned on, and that the LED indicator are light up. If there are several
Bluetooth smart devices around the speaker, deactivate Bluetooth on all smart
devices and try again.
The sound is breaking.
Make sure the distance between the speaker and the connected smart device does
not exceed 10 meters. Make sure that there are no obstacles between the
speaker and the device. Make sure that the speaker is charged properly.
Safety information
The product contains a rechargeable Li-po battery and the battery can not be
replaced. Do not store the product with the battery completely discharged for
extended periods of time. Charge the speaker once every 3 months during
extended periods of storage.
Never attempt to disassemble the product. Repairs should only be performed by
a qualified technician. By repairing it yourself there is a risk of electric
shock and/or short circuit.
Simplified EU Declaration of Conformity
Kjell & Company hereby declares that this device is in compliance with the
essential requirements and other relevant provisions of Directive 2014/53/EU.
Full text of the EU declaration of conformity is available at
www.kjell.com/24450 or 24451.
www.nomadelic.com
Box 50435 Malmö
Sweden
2024-05-27
References
- Nomadelic Vattentät Bluetooth-högtalare Loud 705 - Trådlösa högtalare | Kjell.com
- Nomadelic | Kjell.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>