Nomadelic Active 630 Bone Conduction Sport Headphones User Manual

Bone Conduction
Sport Headphones
Active 630 65349

Overview

1. Multifunction button
2. LED indicator
3. Charging port
4. Transducers

Specifications

charging cable, quick guide

Before first use
Charge the headphones fully before first use.

Use

Charging
Lift the lid protecting the USB-C charging port. Connect the USB-C cable between the charging port (3) and a USB charger (sold separately) Connect the USB charger to a wall outlet. The LED indicator (2) lights upred during charging, and blue when the headphones are fully charged. Afull charge takes up to 1.5 hours.
Note! The headphones cannot be used during charging.

Power on/off
Press and hold the Multifunction button (1) for 2 seconds to turn on the headphones, the LED indicator (2) flashes blue.
Press and hold the Multifunction button (1) for 5 seconds to turn the headphones off.
Note! The headphones turn off automatically after 5 minutes if they are not connected to a Bluetooth source.

Pairing
Make sure the headphones are turned off.
Press and hold the Multifunction button (1) for 5 seconds, the LED indicator lights up and flashes blue and red, alternating. Open Bluetooth settings on your smart device. Search for nearby Bluetooth devices and choose “Nomadelic Active 630” from the list. A sound is played in the headphones to notify you when the pairing is successful.
The headphones automatically connect to the last paired smart device the next time they’re powered on.

Control music and calls
Note! Use your smart device’s controls to change the volume.
Play/pause music/answer/hang up calls: press the Multifunction button (1).
Next track: press the Multifunction button (1) 2 times.
Previous track: press the Multifunction button (1) 3 times.
Reject incoming call/voice assistant: press and hold the Multifunction button (1) for 2 seconds.

Troubleshooting

Problems with Bluetooth connection.
Make sure that the headphones built-in battery is fully charged, the headphones are turned on and that the LED indicator lights up. If there are several Bluetooth smart devices around the headphones, deactivate Bluetooth on all smart devices and try again.

The sound is breaking.
Make sure the distance between the headphones and the connected smart device does exceed 10 meters. Make sure that there are no obstacles between the headphones and the device. Make sure that the headphones are charged properly.

No/low sound is heard from the headphones. Make sure the bone conducting headphones are placed around your neck, with the transducers in direct contact with the skin close to your ears. Make sure they are placed in a way that they can freely conduct the sound to the skull bone. Place the transducers close to your ears, but avoid placing them on the ears or on softer parts of the head such as the temples.
If you wear glasses, make sure the glasses aren’t interfering with the fit of the headphones.

Safety information

The headphones contain a rechargeable Li-ion battery, and the battery cannot be replaced. Do not open and/or disassemble the product. To prevent possible hearing damage, do not listen to high volume levels for long periods.

Simplified EU Declaration of Conformity
Kjell & Company hereby declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. Full text of the EU declaration of conformity is available at www.kjell.com/65349

www.nomadelic.com
Box 50435 Malmö
Sweden
2023-12-14

Documents / Resources

| Nomadelic Active 630 Bone Conduction Sport Headphones [pdf] User Manual
Active 630 Bone Conduction Sport Headphones, Active 630, Bone Conduction Sport Headphones, Conduction Sport Headphones, Sport Headphones, Headphones
---|---

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>