Nomadelic Solo 125 True Wireless Earphones User Manual

June 9, 2024
Nomadelic

NOMADELIC-LOGO.

Nomadelic Solo 125 True Wireless Earphones

Nomadelic-Solo-125-True-Wireless-earphones-product-
image

Overview

Nomadelic-Solo-125-True-Wireless-earphones-01

  1. Touch control surface
  2. Indicator for earbud/microphone

Specifications

  • Bluetooth: 5.0
  • Playback time: 5 h + 15 h
  • Charging time: 1.5 h

Use

Before first use

Charge the case and earbuds fully before first use.

Power on/off

Take the earbuds out of the case to start the headset. Place the earbuds back in the case to turn them off.
Power the earbuds on manually by pressing and holding the touch control surface for 2 seconds. Press and hold the touch surface for 5 seconds to manually turn the earbuds off.
To save battery time, the earbuds automatically turn off after 5 minutes of being out of range from their Bluetooth device.

Pairing

Open the case and remove the earbuds. The earbuds connect automatically. Open the Bluetooth settings on your device and connect to “Nomadelic Solo 125”.
Pairing occurs automatically after this each time the earbuds are removed from the case.

Charging

Connect the USB-C cable to the charging port on the case and a computer or a USB power adapter to charge the case. The charging indicator on the case blinks 1-4 times to indicate the battery level of the case:

  • 1 time: 0-25 %
  • 2 times: 25-50 %
  • 3 times: 50-75 %
  • 4 times: 75-99%

When the indicator turns red, the case is fully charged.
Put the earbuds in the case to charge them. The charging indicator on the earbuds light up during charging. When the earbuds are fully charged the indicator turns off.

Control music and voice assistant

  • Play/pause: Tap the left or right earbud.
  • Volume +: Double-tap the right earbud.
  • Volume-: Double-tap the left earbud.
  • Next song: Triple-tap the right earbud.
  • Previous song: Triple-tap the left earbud.
  • Voice assistant: Press and hold the left or right earbud for 3 seconds.
Control calls
  • Answer a call: Tap the left or right earbud.
  • Hang up a call: Tap the left or right earbud.
  • Reject a call: Press and hold the left or right earbud for 3 seconds.
Reset

If the earbuds do not pair correctly, try to reset.
Place the earbuds in the case. Press and hold the touch control surface on the left and right earbud for 10 seconds. When the indicator flashes four times, the reset is finished. Take the earbuds out of the case. The earbuds automatically pair together, but you must reconnect them to your phone (repeat the steps under the heading “Pairing”).

Troubleshooting

FAQ

Q1: Pairing fails.

  1. Put the earbuds back in the charging case and close the case cover.
  2. Take the earbuds out of the charging case. They enter pairing mode automatically. Choose “Nomadelic Solo 125” in your phone’s Bluetooth settings to pair.
  3. If the pairing still fails, check the following points:
    • Make sure the earbuds and your Bluetooth device are next to each other or within 10 metres and that there are no obstacles between them.
    • Make sure there are no signal interferences nearby (check the ques-tion “Connection is not stable” for signal interference conditions).
    • Try to reboot your Bluetooth device.
    • Try to reset the earbuds.

Q2: I paired the earbuds with my phone before, but I failed to pair them again.
Turn on Bluetooth in your phone and in “My devices”/”Paired devices”, choose “Nomadelic Solo 125”. Tap “Forget This Device”. Then, pair the earbuds with your phone again.

Q3: Connection is not stable.
Make sure that the Bluetooth connection distance is not more than 10 metres and that there are no objects between the earbuds and your Bluetooth device, or a radio or wifi signal that is interfering.

Q4: Power runs out fast.
The earbuds’ playtime varies depending on the volume level and audio content. Put the earbuds back into the charging case after use to avoid unnecessary power consumption.

Q5: The earbuds are reconnecting to my phone while being charged in the case.
When the charging case is out of power during charging, the earbuds automatically turn on and reconnect to the latest paired Bluetooth device. If the earbuds are not paired with a Bluetooth device, they automatically turn off after 5 minutes.

Safety information

This product contains a rechargeable Li-Po battery and the battery cannot be replaced.
To prevent possible hearing damage, do not listen at high volume levels for long periods of time.

Website: www.nomadelic.com
Box 50435 Malmö Sweden
2023-02-23

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals