Nomadelic Solo 300 True Wireless ANC Earbuds Instruction Manual

: May 15, 2024
: Nomadelic

Table of Contents

Nomadelic Solo 300 True Wireless ANC Earbuds
Overview
Specifications
Use
Pairing
Control music and voice assistant
Troubleshooting
Safety information
CONTACT
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Nomadelic Solo 300 True Wireless ANC Earbuds

Overview

Nomadelic-Solo-300-True-Wireless-ANC-Earbuds-fig-1

Touch control surface
Microphone
LED indicator
Reset button
Charging port

Specifications

Bluetooth: 5.3
Playback time: Up to 6 h + 24 h
Standby time: Up to 30 h
Active Noise Cancellation: Up to 20 dB
Water resistant: Yes, IPX4
Wireless frequency: 2402–2480 MHz
Transmission power: 20 mW (max.)
Included in the box: Wireless earbuds, charging case, USB-C charging cable, ear tips, manual

Use

Charge the case and earbuds fully before first use.
Charging
Connect the USB-C cable between the charging port (5) on the charging case and a computer or a USB power adapter. The LED indicator (3) on the case lights up with a pulsating red light, which means the charging cases’ power is below 20 %, pulsating blue light means it’s above 20 %, and when the earbuds are fully charged the indicator lights up with a solid blue light.
Place the earbuds in the case to charge them. The LED indicator on the case starts pulsating while charging. Red pulsating light means that the headphones’ battery power is below 20 %, and blue means it’s above 20 %. When the earbuds are fully charged the indicator turns off.

Power on/off

Open the charging case, the earbuds turn on automatically. Place the earbuds back in the case and close the lid to turn them off.
Power the earbuds on manually by holding the touch control surface (1) for 2 seconds.
To save battery time, the earbuds automatically turn off after 5 minutes of being out of range from their Bluetooth device.

Pairing

Open the charging case, the earbuds connect automatically to each other.
Open the Bluetooth settings on your device and connect to “Nomadelic Solo 300”. Take out the earbuds from the charging case, they are now ready to be used.
Pairing occurs automatically after this each time the earbuds are removed from the case.

Control music and voice assistant

Play/pause: Double-tap the left or right earbud control surface (1).
Increase volume: Tap the right earbud.
Next song: Press and hold the right earbud, and release after 1 second.
Decrease volume: Tap the left earbud.
Previous song: Press and hold the left earbud, and release after 1 second.
ANC on/off/hear through Hold the the left or right earbud, and release after 3 seconds.
Voice assistant: Triple-tap the left or right earbud to activate the voice assistant.
Triple-tap again to turn it off.

Control calls

Answer a call: Tap the left or right earbud.
Hang up a call: Double-tap the left or right earbud.
Reject a call: Hold the touch control surface of the left or right earbud for 1 second.

Reset

If the earbuds do not pair correctly, try to reset them.
Put the earbuds in the case. Press and hold the Reset button (4) for 5 seconds.
The LED indicator (3) flashes red and blue alternating 6 times.

Active Noise Canceling (ANC)
Hold the touch control surface of the left or right earbud for 3 seconds to change between the 3 available settings for ANC: on, off, and hear through.

Troubleshooting

FAQ

Q1: Pairing fails.
- Put the earbuds back in the charging case and close the case cover.
- Take the earbuds out of the charging case. They enter pairing mode automatically. Choose “Nomadelic Solo 300” in your phone’s Bluetooth settings to pair.
- If the pairing still fails, check the following points:
- Make sure the earbuds and your Bluetooth device are next to each other or within 10 meters, and that there are no obstacles between them.
- Make sure there are no signal interferences nearby (check the question “Connection is not stable” for signal interference conditions).
- Reboot your Bluetooth device or reset the earbuds.
Q2: I paired the earbuds with my phone before, but I failed to pair them again.
Turn on Bluetooth in your phone and in “My devices”/”Paired devices”, choose “Nomadelic Solo 300”, tap “Forget This Device”. Then, pair the earbuds with your phone again.
Q3: Connection is not stable.
Make sure that the Bluetooth connection distance is not more than 10 meters and that there are no objects between the earbuds and your Bluetooth device, or a radio or wifi signal that is interfering.
Q4: Power runs out fast.
The earbuds’ playtime varies depending on the volume level and audio content. Put the earbuds back into the charging case after use to avoid unnecessary power consumption.
Q5: The earbuds are reconnecting to my phone while being charged in the case.
When the charging case is out of power during charging, the earbuds automatically turn on and reconnect to the latest paired Bluetooth device.
If the earbuds are not paired with a Bluetooth device, they automatically turn off after 5 minutes.

Safety information

This product contains a rechargeable Li-Po battery and the battery cannot be replaced.
To prevent possible hearing damage, do not listen at high volume levels for long periods of time.
Simplified EU Declaration of Conformity
Kjell & Company hereby declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. Full text of the EU declaration of Conformity is available at www.kjell.com/24356.