ADLER AD 2326 Built In Straightner User Manual
- June 25, 2024
- ADLER
Table of Contents
AD 2326
user manual
AD 2326 Built In Straightner
SAFETY CONDITIONS IMPORTANT INSTRUCTIONS ON SAFETY OF USE PLEASE
READ CAREFULLY AND KEEP FOR FUTURE REFERENCE
The warranty conditions are different, if the device is used for commercial purpose.
-
Before using the product please read carefully and always comply with the following instructions. The manufacturer is not responsible for any damages due to any misuse.
-
The product is only to be used indoors. Do not use the product for any purpose that is not compatible with its application.
-
The applicable voltage is 220-240 V~ 50/60 Hz. For safety reasons it is not appropriate to connect multiple devices to one power outlet.
-
Please be cautious when using around children. Do not let the children to play with the product. Do not let children or people who do not know the device to use it without supervision.
-
WARNING: This device may be used by children over 8 years of age and persons with reduced physical, sensory or mental capabilities, or persons without experience or knowledge of the device, only under the supervision of a person responsible for their safety, or if they were instructed on the safe use of the device and are aware of the dangers associated with its operation. Children should not play with the device. Cleaning and maintenance of the device should not be carried out by children, unless they are over 8 years of age and these activities are carried out under supervision.
-
WARNING: Never use this device close to water, e.g.: under shower, in bathtub, or above sink filled with water.
-
WARNING: Never leave the product connected to the power source without supervision.
Even when use is interrupted for a short time, turn it off from the network, unplug the power. -
WARNING: The temperature of accessible surfaces of an operating device may be high when the equipment is in operation.
-
WARNING: Keep the appliance and its cord out of the reach of children.
-
WARNING: After you are finished using the device always remember to gently remove the plug from the power outlet holding the outlet with your hand. Never pull the power cable!!!
-
WARNING: Never use the product close to combustibles.
-
WARNING: If using the device in bathroom after use remove the power plug from the socket, because water proximity presents risk, even if the device is turned off.
-
WARNING: Do not touch the device with wet hands.
-
WARNING: The device has to be turned off after every use.
-
WARNING: The equipment must be used in such way that in the extreme position of the power cord it is beyond the reach of a person using a bathtub or shower.
-
Do not wrap electric cable around the device.
-
Do not use device in the bath.
-
Do not remove dust or foreign bodies from the inside of the device using sharp or metal objects.
-
Never put the power cable, the plug or the whole device into the water. Never expose the product to the atmospheric conditions such as direct sun light or rain, etc.. Never use the product in humid conditions.
-
Periodically check the power cord condition. If the power cord is damaged the product should be turned to a professional service location to be replaced in order to avoid hazardous situations.
-
Never use the product with a damaged power cord or if it was dropped or damaged in any other way or if it does not work properly. Do not try to repair the defected product yourself because it can lead to electric shock. Always turn the damaged device to a
professional service location in order to repair it. All the repairs can be done only by authorized service professionals. The repair that was done incorrectly can cause hazardous situations for the user. -
The power cord should not touch hot parts of the device and should not be located near other heat sources.
-
In order to provide additional protection, it is recommended to install residue current device (RCD) in the power circuit, with residual current rating not more than 30 mA. Contact professional electrician in this matter.
-
Do not allow the motor part of the device to get wet.
-
Do not touch the hot surfaces of the device.
-
After turning off the appliance, before cleaning or storing it, disconnect the power plug from the socket and allow the equipment to cool down. Please wait long enough because the heated device cools down slowly.
-
Do not use aggressive detergents in the form of emulsions, milks, pastes, etc. to clean the housing, as they may, among other things, remove informative graphic symbols such as scales, markings, warning signs, etc.
-
The device is not designed to work with external schedulers or separate remote control system
-
Do not cover the device, it might cause the accumulation of heat in its interior and it may cause damage or fire.
-
Hairsprays contain flammable materials. Do not apply them while using the device.
-
Do not use the device on people who are sleeping.
-
During operation, do not place the device on wet surfaces or clothes.
-
During operation of the device, metal elements heat up to high temperatures. Do not touch hot parts of the device with your bare hands and do not allow contact with the scalp, as this may result in burns.
DESCRIPTION OF THE DEVICE
- On/Off and temperature setting 140ºC – 180 ºC … – 220ºC
- Cool air button
- Handles
- Temperature indicator: LED diodes
- Lever
- Ceramic plates
- 360° cool air outlet
- Cool tip
USING THE DEVICE
To achieve the best results in hair straightening, use a device on washed, brushed and dry hair. To prevent hair damage, make sure to use the correct temperature setting for your hair type.
-
Before starting the device, power cord should be fully unrolled.
-
Insert the plug into the power socket.
-
Press the On/Off button (1) until hair straightener turns on and LED diode lighten up.
-
Adjust the temperature using temperature setting button (1). During heat up time, the LED diodes will start flashing until the desired temperature is reached. The diodes will stop flashing when the product is ready to use.
-
Starting from the top of the head choose a small strand of hair and straighten it and comb.
-
Then open the handles by pressing the lever (5) and put strand between the plates (6).
-
Move slowly away in the direction from the roots to the ends of hair.
NOTE: The device is hot during operation. Do not touch the plates to the scalp or hands. -
Repeat with the next strand until all the hair bands will be stretched.
-
Wait until the hair cool down and comb them.
-
After finishing work, turn off the straightener. Press On/Off button (1) and hold it for about 3 seconds until the LED diodes turn off.
Then unplug the power cord from the outlet.
CREATING CURLS
- Separate a section of hair. The smaller the section the better result.
- Take a strand of hair and place the hair straightener into the hair at the roots, ensuring that the side of the plates (6) is facing toward the head. Release the lever (5) to close the plates together(6) on the strand.
- Turn the hair straightener 180° downward, so that the initial side of the plates is facing outward.
- Slowly glide the hair straightener along the length of the hair from root to tip on an outward motion.
- Releases the hair straightener from the hair.
- To ensure the curl sits neatly in place, take the end of the section you have just curled and turn 180° in the direction of the curl.
COOL AIR FUNCTION
You can turn on the cool air function at any time by pressing the cool air
button once (2).
The device produces a fan noise when the cool air function is turned on. Press
once the cool air button (2) to turn the cooling off.
AUTOMATIC SAFETY SHUT-OFF
After approximately 60 minutes, the device will automatically shut itself off.
To reactivate the device, press the On/Off button (1).
CLEANING
- Before cleaning, remove the plug from the socket and wait until hair straightener cools down.
- Hair straightener should be cleaned with a damp cloth. Do not submerge in water or other liquids.
- Do not wind the power cable over the device.
TECHNICAL DATA
Voltage: 220-240V~ 50/60Hz
Nominal power: 44W
MAX Power: 120W
To protect your environment: please separate carton boxes and plastic bags and dispose them in corresponding waste bins. Used appliance should be delivered to the dedicated collecting points due to hazarsous components, which may effect the environment. Do not dispose this appliance in the common waste bin.
AFTER SALE SERVICE NOTICE
If you want to buy spare parts or make any complaints, please contact the seller who issued the receipt directly.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>