BONDLINE CM8300C-R Constant Monitor Instruction Manual
- June 24, 2024
- BONDLINE
Table of Contents
BONDLINE CM8300C-R Constant Monitor
Introduction
Thank you for purchasing a Constant Monitor (CM8300C/R). Please read this instruction manual in great detail before operating the device. Keep this manual readily accessible for later reference.
Description
The in-line wrist strap, mat and Earth Constant Monitor is designed to
continuously monitor whether the wrist strap, bench mat or the Earth is
disconnected whilst simultaneously checking the Earth-to-ground system is
working correctly. Should any part of the ESD system fail, a red LED indicator
will illuminate and a buzzer will sound. That part of the system should be
checked using the appropriate test equipment before continuing with
manufacture.
Common Features of the CM8300C and CM8300R
- Constant monitoring of the Earth-to-ground connection.
- Constant monitoring of the work mat to Earth connection.
- Constant monitoring of the wrist strap connection.
FEATURES
-
Features of the CM8300C
Wrist strap body mass adjustment for individual user set-up. -
Features of the CM8300R
Automatically enters standby mode when the wrist strap cord is removed. Indicates ‘high’ or ‘low’ fail for the user’s wrist strap.
Packing List
Make sure each of the following items is included in the pack.
- Main unit…
- Connection kit (x2 crocodile clips, x1 terminal lug, x1 stack snap, x1 straight grounding cord).
- Connecting leads..
- Calibration certificate..
- Instruction manual.
The supplied connection kit allows you multiple ways to install your constant monitor.
INSTALLING
USING
- Registered at Cardiff No. 2933918
- Registered Office: Bondline Electronics, Unit 4,
Rivermead Industrial Estate, Rivermead Drive, Swindon, Wiltshire, SN5 7EX
MORE INFORMATION
- [email protected]
- www.bondline.co.uk
- +44 (0) 1793 511000
The information contained within this reaction manual is for suit on. We wake no wary 2nd 202ressed or