vizulo B10A Luscinia Post Top With Cap LED Street Luminaire Instruction Manual
- June 30, 2024
- VIZULO
Table of Contents
B10A Luscinia Post Top With Cap LED Street Luminaire
VIZULO Luscinia post top with cap LED street luminaire
MOUNTING INSTRUCTION
NETTO WEIGHT
WEIGHT MIN – MAX 7 – 7.15 kg
DIMENSIONS
18.04.2024
SIA VIZULO
Laucu Lejas, Iecava, Latvia, LV – 3913
www.vizulo.com
Caution , risk of electrical shock!
The light source contained in this
luminaire shall only be replaced by the
manufacturer or his service agent or a
similar qualified person.
ATTENTION!
In case of NEMA/ZHAGA Socket. IP66
applies only for luminaire body and for
connection between luminaire body and
NEMA/ZHAGA Socket, and do not apply to
any mounted control device and connection
between control device and NEMA/ZHAGA
Socket.
The luminaire should be positioned
so that prolonged staring into the
luminaire is not expected from a
distance closer than shown in the table above.
WARNING!
• Do not touch LED modules!
• Do not put any tools or other items on
LED modules!
• In case any LED is physically damaged
(example shown below) the warranty is void.
Energy efficiency class of
contained light source(s)
standard
MCB/Inrush current table
Tridonic LED driver (No dim/Midnight dimming/DALI)
Terms of use and maintenance
Before luminaire is turned on, it should be mounted according with this
mounting instruction or any other applicable regulations.
Mounting instructions
with following instructions:
• The warranty of luminaire does not apply, if the mounting of luminaire
has been performed in precipitation (rain, snow, hail).
• The warranty of luminaire does not apply, if a control system
unauthorized by VIZULO or an inapplicable LED driver has been used to
drive the luminaire.
• The warranty of luminaire does not apply, if it has been used in an
unsuitable ambient temperature or has been supplied by voltage outside
• The warranty of luminaire does not apply, if the LED driver program has
been changed in any way.
• The warranty of the luminaire does not apply, if the logged history data
of the LED driver has been deleted of VIZULO.
• The warranty of the luminaire does not apply, if it has been mounted in
been completely submerged under water.
Safety instructions
who is certifed according with national regulations and requirements.
To prevent any accidents person installing the luminaire must follow
national safety requirements and following instructions:
• The label containing technical parameters of the luminaire has to be
studied before the work on it has begun.
• Any luminaire build or design changes are prohibited.
• The luminaire must be used in good technical condition and according
with this instruction.
• Only VIZULO authorized spare parts and accessories can be used to
repair the luminaire.
person.
Maintenance and repair
Luminaire has to be disconnected from electrical grid before it is opened
and/or repaired!
• The person working with the luminaire must follow national regulations
and legislations that apply to maintenance and testing of electrical or
electronic appliances.
• The luminaire may need to be cleaned depending on its environment.
Only a damp cloth or a sponge may be used to clean the luminaire. Use
only household detergents diluted by water.
• Only VIZULO authorized spare parts may be used for the luminaire.
• Instruction for changing spare parts must be requested from VIZULO
and studied before the repair is attempted.
• LED modules, lens and LED drivers can be changed on an installed
luminaire, but it is advised to perform this task indoor to avoid water
entering the luminaire.
• Spare parts (lens, LED modules and drivers) should be ordered from the
information available on the luminaire label.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>