PRIME CCRCOWF32PK Outdoor and Remote Controlled SmatOutlets User Manual
- June 24, 2024
- Prime
Table of Contents
outdoor & remote controlled
Model:
CCRCOWF32PK
Item: 1822579
Rated for Indoor and Outdoor use
CCRCOWF32PK Outdoor and Remote Controlled SmatOutlets
Each Box Contains:
2 
1 Remote Control
1 Wall Mounting Plate
1 Instruction Manual
Required tools:
Screwdriver (not included)
Let’s get started by downloading the App!
See step 1
Congratulations on
your purchase of PRIME + Remote
Contol!
After a fast and free download, the Prime Wire and Cable, Inc, App will walk
you through the complete setup process for your new 
. The Remote is preprogrammed and will work out of the box.
-
Download the Prime Wire and Cable, Inc. App on your smartphone or tablet
Scan the QR code to get the App, or search Prime Wire and Cable, Inc. in the App Store or on Google Play http://onelink.to/35jfmz -
Plug in your device and the
-
Ensure your device is switched to the ON position and plug it into the
-
Plug
I & II into an outdoor rated GFCI receptacle and they will pair automatically during setup -
Open the Prime Wire and Cable, Inc. App Set up your free account and follow the on-screen guide to add devices, set schedules, and control devices from anywhere
-
Connect to Google Assistant, Amazon Alexa or Siri Shortcuts using the guide in the Prime App
**** Follow the step by step guides to connect your Google Assistant, Alexa or Siri Shortcuts
SAFETY INFORMATION & SPECIFICATIONS
THIS TIMER IS A “GROUNDED” DEVICE
The male plug contains a ground pin and is only intended for use with a three-
pronged grounded outlet.
THIS TIMER IS FOR USE WITH A 125VAC POWER SOURCE.
125VAC / 60Hz
DO NOT ATTACH A DEVICE THAT EXCEEDS THE UNIT RATINGS:
15A / 1875W Resistive
8A /1000W Tungsten
1/3 HP
Do not plug heaters or heat producing devices such as coffee makers,
toasters, clothes irons, etc, into the .
LIMITED 1 YEAR WARRANTY
Prime warrants this product to be free from manufacturing defects for a period
of one year from the original date of purchase (“warranty period”), This
warranty is limited to the repair or replacement of this product only and
Prime is not liable for any consequential or incidental damage to other
products that may be used with this unit, This warranty is effective only if
such unit is returned to Prime not later than thirty (30) days after the
expiration of the warranty period, Warranly is void if damage is due lo
neglecl, misuse, alteration, modification, improper installation, or repair by
other than Prime. This warranty is in lieu of all other warranties express or
implied. Some provinces do not allow limitations on how long an implied
warranty lasts or permit the exclusion or limitation of incidental or
consequential damages, so the above limitations may not apply to you.
It is our experience that a product that fails prematurely due to a
manufacturing defect in materials or workmanship, will generally do so very
early in the product’s life cycle, often the first or second time the product
is used. Products that are returned for warranty inspection after months or
years of continuous reliable service are usually the result of normal wear and
tear, which is not considered a defect in materials or workmanship and
therefore is not covered by the warranty.
This warranty gives you specific rights, and you may also have other rights
which vary from province to province, If unit should prove deleclive wilhin
lhe warranly period, relurn within the time period set forth above prepaid
with the original purchase receipt to:
Prime Wire & Cable, Inc.
ATTN: Timer Warranty
1330 Valley Vista Drive
Diamond Bar, CA 91765
Service –888-445-9955 •
www.primewirecable.com
FCC REGULATORY STATEMENT
WARNING: Changes or modifications to this unit not expressly approved by
the party responsible for compliance could void the user authority to operate
the equipment.
This device complies with part 15 of the FCC rules.
Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accep any interference received, including interference that may cause undesired operation.
Notes: This equipmen has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protectigh against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio pequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC RF expasure statement:
The equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment, This equipment should be installed and operated with
minimum distance between 20cm the radiator your body.
IC REGULATORY STATEMENT
Under Industry Canada regulations, this radio transmitter may only operate
using an antenna of a type and maximum tor lesser) gain approved for the
transmitter by Industry Canada. To reduce potential radio interference to
other users, the antenna lype and its gain should be so chosen that the
equivalen fsotropically radiated power (e.i.1.p.) is not more than that
necessary for successful communication.
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions: 1) this device may not
cause interference, and (2) this device must accept any interference,
including interference that may cause undesired operation of the device.
RF exposure statement:
The equipment complies with IC Radiation exposure limit set forth for
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator and your body.
INSTALLATION INSTRUCTIONS:
- Install SmartOutlet to a vertical flat surface close to a properly installed, outdoor rated, and grounded receptacle.
- Using a screw or hook (not included), secure the mounting tab at the top of the SmartOutlet to a wall or post.
- If desired, the included wall plate can be mounted with the included double sided tape to a wall. The remote can be placed into the wall plate.
FAQ
• How do I turn SmartOudlet On/Off if do not have my smartphone and remote?
• Press the button on the front of the SmartOutlet for manual On/Off control.
• The indicator light on the front of the SmartOutlet is not blinking rapidly, How do I make it blink rapidly, so i can connect the SmartOutlet?
• Press and hold the button on the front of the SmartOutlet for 5 seconds, The indicator light in the button will begin blinking rapidly, and is ready to connect.
• What if SmartOutlet doesn’t connect to app?
• Confirm SmartOutlet is powered on. • Confirm SmartOutlet is waiting for network configuration, (Indicator light on SmartOultlet is rapidly blinking.) • Confirm the SmartOutlet, smartphone/tablet, and router are as close to each other as possible. • Ensure the networks of the wireless router and smartphone/tablet are unblocked. • Confirm the network password is entered correctly. • Confirm the wireless router is using a 2.4Ghz Wi-Fi Channel. Ensure the wireless router is broadcasting and the Wi-Fi signal is not hidden. • Confirm the wireless router's encryption method is WPA2-PSK and authentication type is AES, or confirm that both are setup as automatic. • If router enables MAC address filter, please remove the device from the MAC filter list and ensure the wireless router is allowing devices to be connected. • Note that this 2 pack system does not accept any other SmartOutlels to be added to its program.
• How dol erent the remote if it does not switch a SmartOutlet ON or OFF?
• Only plug one SmartOutlet into a properly grounded outlet at a time. • Press ON button on remote until LED on SmartOutlet flashes. • Unplug SartOutle and repeat with other SmartOutlet if needed. If re-sync fails, push power button on SmartOutlet ON and push OFF button on remote until SmartOutlet power button flashes. • Repeat re-sync. • Note that you may have to replace the 12V 23A battery in the remote by removing the battery tray door. • This remote does not work with any other SmartOutlets, only with this 2-pack system.
• For additional FAQ’s please see the FAQ section in the Prime Wire and Cable, Inc. App
• Profile -> FAQ
NOTE: Not for use in wet locations such as sinks, saunas, showers or with
aquariums,
WARNING: DO NOT DISPOSE OF BATTERIES IN FIRE.
BATTERIES MAY EXPLODE OR LEAK.
- Non-rechargeable batteries are not to be recharged.
- Batteries are to be inserted with the correct polarity.
- Exhausted batteries are to be removed from the product.
WARNING: CHOKING HAZARD — Small Parts, Not for children under 3 years.
**Costco Wholesale Canada Ltd.*
415 W, Hunt Club Road
Ottawa, Ontario
K2E 105, Canada
1-800-463-3783
www.costco.ca| ©2024 Prime Wire & Cable,
Inc.
Diamond Bar, CA 91765
Service 888-445-9955
PST, 7am = 5pm
www.primewirecable.com**
rev. 01-02062024 KT
---|---
Apple, the Apple logo, and Siri are trademarks of Apole Inc,, registered in
the U.S, and other countries.
App Score is a service mark of Apple Inc,, registered in the U,S, and otver
counsries.
Gocgle, Google Play. and Google Home are trademarks of Goockk LLC.
Arrazen, Alexa and all related logss are trademarks of
Amazon.c0m , Inc. or its affiliaes.
Prime Wire & Cable, Inc. is nat affiliated with Apple, Google or Amazon.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>