Perfect Prime IR281 Thermal Imaging Camera Instruction Manual
- June 5, 2024
- Perfect Prime
Table of Contents
Perfect Prime IR281 Thermal Imaging Camera
Overview
IR281 is a thermal imaging camera that integrates surface temperature measurement and real-time thermal image. With this product, the potential problems can be identified on the color display screen which is helpful for users to locate problems, take readings and solve the issue. The product has a visual camera integrated to increase the differentiation degree. The thermal and full vision images and videos can be stored in the internal memory card or an additional detachable SD card. The image or video can be stored on a PC to generate a report and print. The following are the major features of IR281:
- High accuracy: The adjustable radiation coefficient increases the measurement accuracy of reflective surfaces.
- Time-saving: The traditional infrared thermometer needs to measure every component one by one, this is not necessary for the IR281.
- Easy to use: Turn on the device and start measuring temperature right away.
- Image & Video: The IR281 has the capabilities to take both images and videos, making it easier for users to analyze the situation.
- Adjustable: 9 types of color palettes and wide range of emissivity values provided.
The product can be utilized in many fields, for instance:
- Detect spills and leaks of chemicals which have different thermal signatures to the surroundings.
- Fire fighting: Vision can be obscured by smoke and debris in the event of a fire, thermal imaging can see through this and locate victims or re spots.
- Locate the source of abnormal leaking of heat of a house or a machine, find out the problem area and fix it.
- Enable drug-enforcement units to locate cannabis plants by detecting abnormal amount of heat spot in buildings.
- Moisture detection: Areas with lower temperatures to its uniform surroundings can be a source of moisture staining or damage.
- Measure body temperatures: Point the thermal imaging camera at a person to find their surface body temperature.
- Night vision: Measuring the electromagnetic energies given off when objects emit heat, the IR281 translates those energies into visible light for users to see them in the dark.
- Building inspection: Check that heat is retained uniformly in a building.
IR281 is the ideal selection for electrician, maintenance personnel, technicians and even the emergency personnel.
Safety & Considerations
Please read the instructions carefully so as to ensure accurate measurement results and safety:
- Do not use devices in explosive, flammable or corrosive environments.
- Do not dismantle the product, doing so can damage it and revoke the warranty.
- Since the product is a precision electronic and sensitive optical device. Do not drop it or allow impacts to occur to prevent damage.
- Please use a damp cloth or gentle soap to clean the enclosure of the device. Do not use abradant, isopropanol or solvent to clean. A special optical lens cleaner should be used to clean the screen.
- It is suggested to use the attached USB cable.
Product Features
- Trigger
- Up navigation button
- Menu button
- Left navigation button
- Down navigation button
- Power button
- Right navigation button
- LED indicator for charging
- Mic
- Tripod nut
- Speaker
- Display
- Visual camera
- Thermal camera
- Rubber cover (for MicroSD slot and USB-Type-C port) Ventilation holes (for cooling purpose)
Product Specifications
Product Specifications Thermal Image Specifications
Product Specifications
Software Features
Operation Flow
Power ON: Press & Hold Power button for 2 sec.
- Opening Screen (wait for initialization)
- Measurement Screen
Power OFF: Press & Hold the Power button for 2 sec.
- A pop-up menu appears for Power Off. Then, press . Measure button to power off.
Display OFF (Sleep Mode): Press the Power button once to turn off the display. Press the Power button again to turn on it.
- Remark: Due to the sensor initialization, there is around ~4sec loading screen (see below) before displaying thermal display.
Operation Flow
Menu Screen: Press the Menu button to enter Menu mode.
The default selection is first icon (i.e. Display brightness)
- Use Up/Down/Left/Right button to select the icon. Then, press the Measure button to open the selected item.
- Press the Menu button to back to Measurement Screen.
The summary of Menu icons:
Measurement Screen
Select the temperature detecting target on the screen
- Touch the screen directly with a fnger to adjust the location of the Touchable thermal mark.(The target will be set automatically after touching the screen.)
- The temperature will be detected and the Thermal readout will be shown according to the latest target.
Selection of measurement screen modes
Capture and save images
- Press Trigger to capture the image which temperature readout will be saved in CSV format also.
Capture and save videos:
- Long press and hold Trigger to capture the video.
Remark: The images/videos will be saved in a micro-SD card once the micro-SD is ready; otherwise the images/videos will be saved in internal memory).
Display Brightness
- Press Left/Right button to increase/ decrease the % of display brightness.
- Press Measure to confirm.
- Press Menu to return to the previous screen.
Date and time
- Press Up/Down button to increase/decrease the selected item.
- Press Left/Right button to select the item for change.
- Press Measure to confirm.
- Press Menu to return to the previous screen.
Auto-off timer
- Press Left/Right button to increase/decrease the auto-off timer.
- Press Measure to confirm and back to the previous screen.
- Press Menu to back to the previous screen.
Remark:
The Auto-off timer is from 0min 30sec (minimum) to 30min (maximum), or it can
be set to “never” (always on). This timer is for display off only, not power
off.
Hi-Low Temperature Alarm
- Press and hold the Measure button to turn ON or OFF the Hi-Lo temperature alarm setting. (The default Hi-Lo Temperature Alarm is OFF) When Hi-Lo Temperature alarm is ON:
- Press Left/Right button to increase/decrease the temperature.
- Press Up/Down button to select the High or Low Temperature.
- Press Measure to confirm and back to the previous screen.
- Press Menu to back to the previous screen.
Auto-Monitor Alarm
- Press and hold the Measure button to turn ON or OFF the Auto-monitor alarm. (The default Auto-monitor alarm is OFF) When Auto-monitor alarm is ON:
- Press Left/Right button to increase/decrease the selected item.
- Press Up/Down button to select the Temperature or Duration.
- Press Measure to confirm and back to the previous screen.
- Press Menu to back to the previous screen.
- Duration is from 15min, 30min, 45min, 60min, 90min and 120min.
Temperature Unit
- Press Left/Right button to select degree °C or degree °F.
- Press Measure to confirm.
- Press Menu to return to the previous screen.
Image Format
- Press the Left/Right button to select BMP or JPG image format.
- Press Measure to confirm and back to the previous screen.
- Press Menu to back to the previous screen.
Factory Reset
- Press Left/Right button to select YES or NO.
- Press Measure to confirm.
- Press Menu to back to the previous screen.
Color palette
- Press Up/Down button to select the color palette.
- Press Measure to confirm and back to the previous screen.
- Press Menu to back to the previous screen.
View Image .
- Press Up/Down/Left/Right button to select Image Icon.
- Press Measure to open the image or video.
- ress and hold Measure to move the selected item to delete folder.
- Press Menu to back to the previous screen.
Delete
- Press Up/Down/Left/Right button to select Image Icon.
- ress Measure to open the image or video.
- Press and Hold Measure to pop-up the recover or permanent delete menu.
- Press Menu to back to the previous screen.
Min/Max Crosshairs
This is the function to chase the minimum and maximum points of the
view.
- Press Left/Right button to turn ON of OFF the Min/Max crosshair
- Press Measure to confirm.
- Press Menu to back to the previous screen.
Recording Mode
- Press left / right to turn ON or OFF the recording mode.
- Press Trigger to confirm and back to the menu screen.
- Press to exit menu mode.
- Press the Trigger button to start the recording and press again to stop the recoding.
Remark:
Recording will be stopped automatically when the memory is full or return to
MENU mode.
Image Alignment
- Press up / down / left/right to turn ON or OFF the recording mode.
- Press to exit menu mode.
Cast screen
The Cast screen function is to cast the display on the TV. (The TV must be
Android TV or connected with Android Miracast receiver)
- Press Left/Right button to turn the ON or OFF the Cast screen function.
- If the Android TV (or Android racist receiver) is found, it will show on the display.
- Press Up or Down to select the device for sending the display.
- Press Measure to connect with the selected device.
- To Turn off the cast screen function, it is just switched OFF the cast screen function.
Software Update
It can check the latest software available for update the unit.
- If the Wifi is not connected, press the display “Disconnected” to enter the WiFi setting.
- In the Wifi setup, select the Wifi SSID and input the password to connect with the WiFi.
- Press Menu button to back to the Software update.
- If the Wifi is connected, it will search for the latest software, which are available for update.
- Press Up or Down to select the software version.
- Press Measure to start the software update. The selected software will download from server and update the unit automatically. It can check the latest software available for update the unit.
CSV Files
For every image you take, CSV Files of each image would be saved for you to
analyze and generate reports. The file shows the temperature point of each 32
x 32 pixel. You can view these files in Internal Storage/SD Card -> DCIM ->
Csv. Here is an example of what the file looks like:
Emissivity
- Press Up/Down button to adjust the emissivity.
- Press Measure to confirm and back to the previous screen.
- Press Menu to back to the previous screen.
There are four types of object measurement mode:
- Coarse object (easy to give out energy)(0.95);
- Semi-matte object (0.80);
- Semi-shiny object (0.60);
- Shiny object (0.30);
The table of Emissivity Table:
CUSTOMER SERVICE INQUIRIES
Your emails are important to us so we strive to reply all inquiries and emails
within 24 hours. In exceptional cases, we may require more time to respond.
Thank you for your understanding. For more information about our products and
services, please send us an email: cs@perfectprime.com
For B2B or project-based application, please send an
email: cs@perfectprime.comFOR MORE INFORMATION ABOUT
PERFECTPRIME PLEASE VISIT
OUR ABOUT US PAGE AND FEEL FREE TO BROWSE.
- Scan QR Code for the Youtube channel for video manual
- Scan QR Code for the Product Manual page (Multi-Language available for certain products)
- Scan QR Code to register the product for 1 year warranty