Prime Brands WCP5 Wireless Charging Pad User Manual
- June 1, 2024
- Prime Brands
Table of Contents
Prime Brands WCP5 Wireless Charging Pad
Product Specifications
- Product Name : Wireless Charging Pad
- Model: WCP5
- Charging Compatibility: Phones with wireless charging capability
- Input : Standard charger plug
- Charging Method: Qi wireless charging
Product Usage Instructions
- Plug in the charger to a power source.
- Place your phone on the charging pad.
- Ensure that the phone is properly aligned on the pad for charging to start automatically.
- Wait for the charging indicator to show that the phone is charging.
- Once fully charged, remove the phone from the pad.
Warnings and Important Information:
- This device is not a toy and should be kept away from children.
- Avoid using the device in humid environments or extreme hot/cold temperatures.
- Warranty may be void if the product shows signs of metal rust, water damage, or other natural oxidation.
- Any changes or modifications not approved may void the warranty.
- Compliance with FCC regulations for interference and radiation exposure.
Warranty Information
This product comes with a 1-year warranty against manufacturing defects under regular consumer use. For warranty service, contact Customer Service at [email protected].
Thank you for purchasing the WCP5 Wireless Charging Pad. Just plug in the charger, place your phone on the charging pad, and it starts charging automatically.
- Includes: Wireless charger, USB charging cable, user manual.
PRODUCT KEY
- Wireless Charging Area
- LED lights
- Type-C Charging
SPECIFICATIONS
CONNECTING
- Connect one end of the included charging cable to the wireless charging pad.
- Connect the other end of the charging cable to a wall adaptor or other suitable 5V power source. The red light will turn on when the power is connected.
- Place your smartphone or wireless charging-enabled device on top of the charging pad. The RGB light will change the color to indicate the phone is charging.
WARNING
This device is not a toy and should be kept away from children.
Do not use the device in humid environments or in extremely hot/cold temperatures.
The warranty is invalid if the product has metal rust, water damage, or other natural oxidation.
The warranty is invalid if the product has metal rust, water damage, or other natural oxidation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this device. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for
compliance could void the oser’s authority to operate this device.
This device complies with part 15 of the FCC Roles. Operation is subject to
the following two conditions: (1)
This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause the
desired operation
NOTE: This equipment has been tested and found to comply with the limits foe a Class B d屯ital device, parent to part 15 of the FCC Roles. These limits are designed to provide reasonable protection against harmful interferencence in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful inte1fe1ence to cadio communications. However, there is no guarantee that interference will not ocw, in a particular installation. If this equipment does c'”se harmful interference to radio or television reception, which can be date, mined by turning the equipment off and on, the “5er is encouraged to tcy to COiiect the interference by one or more of the following measures
Reorient or relocate the receiving antenna
- lnccease the separation between the equipment and, receive,
- Connect the equipment into an outlet on a crew it different from that to which the receiver is connected
- Consult the dealer or an experienced radio/TV technician for help
WARRANTY
This product has a one-year warranty against defects in manufacturing under regular consumer use. For instructions about how to obtain warranty service for your product, please contact Customer Service: [email protected].
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
(©2023 Prime Brands Group. All rights reserved. All trade names are registered trademarks of the respective manufactures listed. Made in China. ©2023 Prime Brands Group.
Prime Brands Group
- Brooklyn, NY 11232
- www.soarspaces.com
FAQS
Q: Can I use the wireless charging pad with any phone?
A: The pad is compatible with phones that have wireless charging capability. Please check your phone's specifications before use.
Q: How do I know if my phone is properly aligned for charging?
A: Ensure that your phone is centered on the pad and check for the charging indicator on your phone to confirm charging has started.
Q: What should I do if the charging pad is not working?
A: Check the power source, phone compatibility, and alignment on the pad. If issues persist, contact Customer Service for assistance.