Perfect Prime IR203 Thermal Camera For Apple iOS Devices Instruction Manual
- June 5, 2024
- Perfect Prime
Table of Contents
- Overview
- App Download
- Product Specifications
- Symbol Definition
- Getting Temperature of a Point
- Choose Color Palette
- Enable Filters for Better Picture Quality
- Contour Detection (Beta, Experimental)
- Menu Settings
- Recording Functions
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
IR203 Thermal Camera
For Apple iOS Devices
Instruction Manual
Overview
PerfectPrime provides you a way to sense the invisible, measure the unfathomable, and analyze the improbable by providing thermal images and temperature measurements in a new way. This Guide provides you with all the information you will need to operate the IR203.
The IR203 is powered by the host device, no charging or battery is needed
App Download
Scan the QR code below or enter the URL (https://apps.apple.com/tn/app/senxorproviewer/id1541291250) to download the “SenXorProViewer” application and install it (only supports iOS Phone system).
Product Specifications
3.1. General
| Resolution | 80 × 62 |
|---|---|
| FOV (angles in degrees) | 44.2° (H), 34.5° (V) |
| Maximum frame rate | 15 FPS |
| Max scene temperature range | -40°C to 400°C |
| NEED | 150mK |
| Accuracy | up to +/-1°C |
3.2. Environmental
| Operating temperature | -20 – 85°C |
|---|---|
| Storage temperature | -40 – 85°C |
3.3. Interface
| Power Consumption | 300mW |
|---|---|
| iOS Dongle connector | Lightning |
| iOS Dongle size | 56mm x 28mm x 14mm |
3.4. Mechanical
| iOS Dongle weight | 9.3 g |
|---|
Symbol Definition
You can download and install the Meridian SenXorProViewer App on Apple App Store. You need to install the App before you use the IR203.
- Settings
- Contour Detector Mean temperature
- Contour Detector Selected contour
- Color Palette temperature adjustments
- Min/Max temperature And spread
- Flip Image
- Auto Range (temperature)
- Start/Stop Capture
- Image adjustments
- FPS Up/Down Display
- Selected point (x,y) temperature
- Current color palette
- Save Video Button
- Connection Status (red is not connected Green connected)
Getting Temperature of a Point
The SenXorProViewer App allows the user to get the temperature of a particular point by touching the location on the thermal picture. The crosshair on the thermal picture indicates the selected X Y coordinates and the corresponding temperature is shown on the screen
Choose Color Palette
The SenXorProViewer App allows the user to choose preset color palettes to map temperature values to different colors, including grayscale, colors, and combinations. 16 preset color palettes are provided for image visualization, temperature data is not affected. Tap the palette list, select one of the palettes on the drop-down list and the result will be applied to the new thermal image.
Enable Filters for Better Picture Quality
|
---|---
The SenXorProViewer App supports the following types of image filtering that
serve to improve the intrinsic noise of the detector:
Temporal filters — these work in reducing the temporal fluctuation of
individual detector pixels from one thermal frame to the next:
- Simple rolling average — accessed via the Averaging button, with recommended values of 2 or 4 (number of frames over which the averaging is performed.
- Predictive temporal filter – access via the Temporal Filter. The strength of which can be selected between low and high, depending on the dynamics of the scene. For static scenes, high strength is recommended, while for scenes with motion, low strength is recommended to avoid ghosting artifacts in the video.
Spatial filter – access via the AI Pre-trained Filter. This filter works by reducing the noise within an individual frame by considering the relation between the values of individual pixels within the frame. It is enabled by default and works best in conjunction with the temporal filters.
Contour Detection (Beta, Experimental)
The Contour Detection feature is for DEMO purposes only, not for medical
advice or usage.
The SenXorProViewer App supports an indicative contour detection as an
experimental feature. The function is based on the detection of the hottest
region within the captured image– then displays the mean of the hottest
region.
The SenXorProViewer App shows the contour of the hottest spot that is
automatically detected. Since the model involves some parameters, the user has
control over them to fine-tune the threshold and obtain a more stable readout.
The model is intended for the distance between the camera and the subject in
the range of 0.7 to 2 m.
Menu Settings
The setting of Filters, Contour Detection, Temperature Unit, and Emissivity
and Language Selection can be found in the menu. Each setting is saved after
the change and will be kept even if the SenXorProViewer App is restarted.
Emissivity is a property of the material of each individual object in the
field of view. It quantif ies the ability of the surface of an object to emit
long-wave infrared radiation and strongly affects the temperature readout from
the IR203. By default, the emissivity is set to 0.95 which is a representative
value for many common objects with matt surfaces, as well as the human skin
(in the range of 0.95 – 0.97). Note that metals tend to have a dramatically
lower emissivity as low as 0.1, and it strongly depends on their surface
processing. The user can adjust the emissivity according to the exact object
of observation.
Recording Functions
Thermal video can be stored on the camera roll by pressing the save button on
the video streaming screen. To capture thermal photos, switch to photo mode
and press the camera button. The photos captured are stored in the camera
roll.
Note: The SenXorProViewer App does not collect or save any thermal image
or video unless the user selects to save a picture or video to the device.
CUSTOMER SERVICE INQUIRIES
Your emails are important to us so we strive to reply all inquiries and emails
within 24 hours. In exceptional cases, we may require more time to respond.
Thank you for your understanding.
For more information about our products and services, please send us an email:
cs@perfectprime.com
For B2B or project-based applications, please send an email:
sales@perfectprime.com
FOR MORE INFORMATION ABOUT PERFECT PRIME PLEASE VISIT OUR ABOUT US PAGE AND
FEEL FREE TO BROWSE.
Scan QR Code for the Youtube channel for video manual| Scan QR Code for the
Product Manual page (Multi-Language available for certain products)| Scan QR
Code to register the product for 1 year warranty
---|---|---
| |
http://qr.w69b.com/g/r4oLxa2l2| http://qr.w69b.com/g/qRw248shO|
http://qr.w69b.com/g/mT0iM63Vm
Retailer Tyche Smart Limited
Email cs@perfectprime.com
Address 2nd Floor, 107 Charterhouse Street,
EC1M 6HW, London, England UNITED KINGDOM
Telephone +44 203 7695377
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>