Televes AVANT X Programmable Multiband Amplifier User Manual
- June 24, 2024
- Televes
Table of Contents
Televes AVANT X Programmable Multiband Amplifier
Specifications
- Model : AVANT X
- Type : Programmable multiband amplifier for terrestrial signals
- Filters : 32 digital programmable filters
- Inputs : FM-4xLowVHF/HighVHF/UHF-CATV
- Frequency range : CATV input (54-1220MHz)
- Programming : Easy and intuitive programming using A Suite application on Android or Windows/Mac
- Automatic LTE filtering
Product Usage Instructions
Installation
- Unbox the AVANT X multiband amplifier.
- Connect the RF inputs (FM, LowVHF, HighVHF, UHF, CATV) to the corresponding sources.
- Ensure proper grounding of the amplifier for safety.
Programming
- Download and install the ASuite application on your Android or Windows/Mac device.
- Open the ASuite app and follow the on-screen instructions to program up to 32 digital filters.
- Set the desired programming mode based on your requirements.
Functionality
- Enable or disable the FM input as needed.
- Adjust gain and slope for CATV input within the specified range.
- Utilize LED indicators to monitor unit and signal status.
FAQ
-
Q: How many digital filters can be programmed on the AVANT X?
- A: The AVANT X allows programming up to 32 digital filters on 4 LowVHF+HighVHF+UHF inputs.
-
Q: What is the purpose of LTE filtering in the multiband amplifier?
- A: The multiband amplifier can detect LTE signals and automatically set the filter to channel 36 (for LTE600) or 51 (for LTE700) to minimize interference.
AVANT X programmable multiband amplifier for terrestrial signals, with 32
digital programmable filters
A new evolutionary stage
Multi-input multiband amplifier, perfect for terrestrial individual or MDU
(Multi Dwelling Unit) installations, that allows programming up to 32 digital
filters on 4 LowVHF +HighVHF+ UHF inputs (DTT).
The multiband amplifier is equipped with 6 inputs: FM-4xLowVHF/HighVHF/UHF-
CATV, and can achieve programmable amplification and balancing of the
different RF inputs.
Thanks to ASuite, the multiband amplifier programming is very easy and
intuitive using an Android or Windows/Mac application.
The multiband amplifier is able to detect LTE signals and automatically set the filter to channel 36 (for LTE600) or 51 (for LTE700), thanks to the automatic LTE filtering.
Physical data
- Ref. 532180
- Logical ref. AVANTXAM
- EAN13 8424450212004
Packing
- Box 1 pcs.
- Net weight 850.00 g
- Gross weight 1,200.00 g
- Width 226.00 mm
- Height 120.00 mm
- Depth 53.00 mm
- Main product weight 920.00 g
Highlights
- Digital processing technology implemented on terrestrial TV signals
- Up to 32 individually programmable filters: single channel digital filtering, even for adjacent channels (1 to 4 channels)
- Digital processing of channels: output channels can be frequency shifted
- Automatic signal adjustment in each filter (AGC): and output signal manual regulation
- UHF/HighVHF/LowVHF digital filters with high selectivity: 30dB rejection (@ 1MHz)
- AutoLTE: automatic internal adaptation of filters, depending on the LTE signal type (CH36/CH51) CATV signal input with extended frequency range: 54-1220MHz
- SAW filters (Surface Acoustic Wave) against LTE interference, with the best selectivity and stability Compatible with ISDB-Tb, ATSC, DVB-T/T2 and NTSC
- TForce Technology : terrestrial signal level always stable and adapted to its optimum value Storage multiple setup configurations, allows user to transfer data to other AVANT X units Zamak chassis provides high RF shielding
- Light-weight and compact multiband amplifier with a wide range of features (8.85″ x 4.72″ x 2.16″)
- Very easy configuration and adjustment using ASuite application for Android or Windows
Main features
- All the inputs support UHF, HighVHF and LowVHF
- Automatic balancing according to the programmed output level and equalization slope High output power
- Allocation of filters to inputs without restraints
- Powering of pre-amplifiers or BOSS system
- LED indicators displaying both unit and signal status
- Easy-to-replace power supply
Discover
Avant X: A new evolutionary stage
Avant X is a full digital programmable single channel headend, which main
mission is to achieve a programmable amplification and balance of different RF
input signals.
-
LowVHF+HighVHF+UHF inputs: the channels present in these inputs can be filtered and adjusted using up to 32 digital filters. Each filter can be tuned to any LowVHF+HighVHF+UHF channel, and its bandwidth can comprise between 1 and 4 channels.
The arrangement of the 32 filters is configurable based on the number of channels present on each LowVHF+HighVHF+UHF input. It’s compatible with ISDB- Tb, ATSC, DVB-T/T2 and NTSC. The output level is programmable between 30-55dBmV. Furthermore, an equalization slope of up to 8 dB can be programmed at the output. -
The FM input can be enabled or not. In case this input is enabled, it will be amplified and its output level set to 10 dB below the lowest-level UHF channel (taking into account the equalization slope).
-
CATV input : it has an extended frequency range (54-1220MHz). The gain and the slope (0-20dB) are programmable.
Choose the desired programming mode…
Avant X provides different programming options
- App ASuite for PC/Mac or tablet/Android smartphone, via USB connection (OTG cable included): The multiband amplifier configuration is performed in a friendly and intuitive environment. A configuration can be defined and stored – even without being connected to the multiband amplifier – only to retrieve it at installation and adjustment time.
- Universal programmer (ref. 7234): The unit is compatible with the programmer, ensuring backwards compatibility.
By pressing the READJUST button (short press), the unit is readjusted to the
stored configuration values.
After the multiband amplifier is adjusted, a manual fine tuning can be
performed to slightly correct the LowVHF/HighVHF/UHF filters’ gain.
Application example
Technical specifications: Ref. 532180
