UGDLUCK X3S-(8.26) Automatic Wireless Car Mount

Specifications

• Product name: X3S
• Operating frequency: 110K-205KHZ
• Recommend Charging distance : 4mm
• Input: 5V/2A, 9V/2A, 12V/2A (QC3.0/PD/AFC)
• Output power: 5W/7.5W/10W/15W (MAX)
• Applicable mobile phone : 4.0-6.9 inches
• Product size : 97.5 62 20.5mm
• Net weight : 155.5g

Product Introduction

• Left arm clamp
• Right arm clamp
• Bottom bracket
• Wireless charging coil/indicator
• Wireless charging coil area
• Button
• Type-C charging port
• Nut

Product Usage Instructions

Dashboard Installation

1. Clean the dashboard surface.
2. Tear off the protective film from the suction cup.
3. Press the suction cup firmly onto the dashboard.
4. Press the button to lock the mount securely in place.

Air Vent Clip Installation

1. (Steps for air vent clip installation go here)

Working Process

1. Charging: Use the provided USB cable to connect to a QC 3.0 adapter.
2. Extendable arms:
   • Click the side button to open or close the arms.
   • The arms will automatically clamp once the phone is placed in position.
3. Switching Colors:
   • Double-click the button to change the light color.
   • Light sequence: red, orange, yellow, green, blue, purple.
   • The device has a light memory function to retain the last color setting after restart.

FAQs

• Q: How do I turn off the indicator light?
  • A: Long press the side button for 3 seconds to turn off or on the indicator light.

Packing list

Dashboard Installation

Assembly

Air Vent Clip Installation

Working Process

Working Process

• Extendable arms

1. Click the side button to open or close the
2. Arms will auto-clamping after putting the phone in

Double click to switch colors

• A. Double click the button to change the colon
• B. Light sequence: red, orange, yellow, green,blue nurdle
• C.Light memory function

Product introduction

1. Left arm clamp
2. Right arm clamp
3. Bottom bracket
4. Wireless charging coil/indicator
5. Wireless charging coil area
6. Button
7. Type-C charging port
8. Nut

Product parameters

• Product name : X3S
• Operating frequency: 110K-205KHZ
• Recommend Charging distance : ≤ 4mm
• Input: 5V/2A, 9V/2A, 12V/2A (QC3.0/PD/AFC)
• Output power : 5W/7.5W/10W/15W (MAX)
• Applicable mobile phone : 4.0-6.9 inches
• Product size: 97.5 62 20.5mm
• Net weight : 155.5g

Lighting mode

INDICATION

1. Not recommended to install the mount on rough, dirty, and curved surfaces.
2. The wireless charger only works with phones that support wireless charging.
3. Use the original cable to connect the power supply before use.
4. Please use the QC 3.0 car charger for fast charging (NOT INCLUDED)
5. The thickness of the phone case does not exceed 4mm.
6. Close the running app on the phone to reduce power consumption.
7. Make sure there is no metal material on the back of your phone/ between the phone and the phone case.
8. With over-temperature protection, the product may stop working if the temperature exceeds 50℃.
9. Do not expose it to direct sunlight for a long time as high temperature will weaken the suction cup.
10. To renew the stickiness of the suction cup, just rinse it with water and let it air-dry

FCC STATEMENT

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This device complies with part 15 of the FCC Rules.

Operation is subject to constraints

1. This device may not cause harmful interference,and
2. this device must accept any interference received including interference that may cause undesired operation.

WARRANTY CARD

Dear Customers.

Thank you very much for choosing us. As a responsible seller we will try our best to provide the best products and services to you.
Please feel tree to contact us if you have any problems or suggestions with our products.We will provide you with free return and exchange services.
Customer Service Email:  [email protected]

Best wishes

UGDLUCK

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>