UGOOD QC935G Bluetooth Speaker 5W + Wireless Charging 15W User Manual

UGOOD QC935G Bluetooth Speaker 5W + Wireless Charging 15W User Manual

Product Introduction

Thank you for purchasing this night light wireless charger speaker. Please read this manual carefully before using this product and save this manual for future use.

Package Contents

• Wireless speaker x1

• USB Type-C Cable x 1 pecs

• User Manual x1

Product Features

1. Type C Input
2. Indicator light:

Type-C cable connection: the indicator light is green, flashes 3 times, and then goes out.
Wireless charging : when wireless charging is in progress, the green Indicator is always on.
Switch: when the switch is turned on, the indicator light is blue and flashes.
Bluetooth connection: after the Bluetooth connection is successful, the blue indicator is always on.

3. ON/OFF

4. Loudspeaker

5. Touch switch of night light:
   Long touch to turn on/off the night light, short touch to adjust the brightness, It cycles through different brightness(the order is weak, medium, strong brightness).
   When the wireless charging is working, the night light will be breathing light mode, When the wireless charging is turned off, the night light will be turned off. During the charging process, the night light can also be turned on/off by long touching the switch

6. Night Light

7. Wireless charging area

8. Mobile phone holder

Specification

Operating Instruction

1. Wireless Charging
2. Connect the USB type-C cable we provided to USB wall charger. the indicator light is green, flashes 3 times, and then goes out.
3. Place your phone in the center of the wireless charger area to ensure stable charging. when wireless charging is in progress, the green indicator is always on.

Note:

1. Make sure your mobile phone is Qi-enabled.
2. To fully utilise 15W fast charging, please use a PD/QC 27W wall adaptor.
3. Pairing with mobile phone
4. Connect the USB type-C cable we provided to USB wall charger. the indicator light is green, flashes 3 times, and then goes out.
5. Slide switch to turn on the wireless speaker, you will hear a tone, and the indicator light is blue and flashes.
6. Connect the mobile phone and speaker ‘QC935G’ through Bluetooth.

When the Bluetooth connection is successful, you will hear the prompt tone and the indicator light is always on blue.

Using the Ring Light

1. To turn ring light on or off, press and hold the ring light switch along the top for 3 seconds.
2. To adjust light intensity, tap the ring light switch along the top.

Precautions

1. Keep product dry to avoid short circuits or other damage to electronica components.
2. Avoid placing metal or magnetic items on the charging area which could result in overheating and product failure.
3. Keep device away from high heat and flammable liquids and gasses. Avoid using in environments above 45℃ and below 0℃.
4. We strongly recommend using a high quality, certified wall adapter to provide power to this device. Failure to do so may result in slow charging speeds or product failure.
5. Do not disassemble the product or replace any parts. In case of the damage to this item, please stop using the product immediately.
6. Wireless speaker stop working if operating temperature exceed 45℃. It will work again once less than 45℃.
7. Wireless charging stop working if temperature of the foreign object exceed 70℃. It will charge again once less than 70℃.

Troubleshooting

1. My phone won’t charge
   a) Ensure your phone is Qi enabled.
   b) Ensure the cable is plugged into a reliable wall adaptor. The wireless charging function only works when plugged into a source of power.
   c) If wireless charging speeds seem slow we recommend ensuring that thew all adapter you’re using can reach speeds upwards of 10 watts.

2. The Bluetooth speaker won’t work
   a) Ensure the Bluetooth speaker is charged and turned on.
   b) Ensure the Bluetooth speaker isn’t connected to another phone or device

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However. there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help

NOTE: This device and its antenna(s) must not be co-located or operation in conjunction with any other antenna or transmitter

RF Exposure Statement
To maintain compliance with FCC’s RF Exposure guidelines, this equipment should be installed and operated with minimum distance of 20cm the radiator your body.

This deviceand its antenna(s) must not be co-located or operation in conjunction with any other antenna nr transmitter.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>