MINISO AU003 4-In-1 Wireless Speaker User Manual
- June 5, 2024
- MINISO
Table of Contents
MINISO AU003 4-In-1 Wireless Speaker
PRODUCT OVERVIEW
-
Lamp Power Button.
Tap the button to switch among mode 1, mode 2, mode 3, off. -
Speaker Power Button:
Push to ON, the speaker will turn on. Push to OFF, the speaker will tum off. -
AUX Port:
Plug the audio cable in to connect your audio device directly to the speaker. -
Charging port
Plug Micro USB charging cable in to charge the device
SPECIFICATIONS
FUNCTIONS
HOW TO USE
- Store and use the product at room temperature
- Do not expose the product to rain or moisture.
- Do not throw the product to avoid damage caused by dropping
- Do not disassemble, repair or modify the product yourself.
- The product has a built-in lithium battery, which is not replaceable Do not discard it or toss it in fire to avoid danger.
- To prevent its performance from being affected, keep it away from strong magnetic objects.
- When not in use for a long time, charge the speaker every 3 months to extend the battery life.
- If any abnormal condition occurs during use, stop using it immediately.
- Use it indoors only
- Rechargeable lithium battery inside. It should be disposed of properly to avoid polluting the environment and recycled if possible
- The light source of the product is irreplaceable. When it reaches the end of its service life, the entire product should be replaced.
- The product may fall when it is on a surface with an inclined angle of more than 6 degrees.
TROUBLESHOOTING
- The wireless speaker is unable to pair with the cell phone. Solution: Confim if the wire less speaker is in pairing mode, and if the Bluetooth on your phone is toggled on. Then delete the product in the list, pair it with your phone again according to the User Manual
- The wireless speaker is unable to be turned on. Solution: Confirm the battery level. Charge the speaker if it is needed
- Can the battery of the wireless speaker be replaced? Solution: No, this is lithium polymer battery, which is irreplaceable.
- Can I use the wireless speaker at a high volume for a long time? Solution: To extend the lifespan of the wireless speaker, it is not recommended to play it at a high volume for a long time.
- The link between the wireless speaker and the mobile has been disconnected within 10 meters. Solution: Bluetooth is wireless so that it is very sensitive to objects between the speaker and the connected device. Check if there are any metal or other objects that may affect the connection within the effective distance.
- Cannot hear audio playing when the speaker is connected to the computer or phone. Solution: Check whether the computer’s audio output is already connected to the wireless device and whether the Bluetooth in the computer supports the A2DP protocol. Make sure the volume is up on your phone or computer.
- Can I operate the Apps of my phone through the speaker after pairing the wireless speaker with the phone? Answer: Some apps may not support being operated through the speaker due to their settings.
ACCESSORIES
The product x 1, charging cable x 1, user manual x 1.
FCC Warning:
This device complies with Part 15 of the FCC Rules, Operation is subject to
the following two conditions: (1)This device may not cause harmful
interference, and (2)This device must accept any interference received,
including interference that may cause undesired operation.
Caution:
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
NOTE:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be detemined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
df the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
IC Warning
This device contains license-exempt transmitter(s/receiver(s) that comply with
Innovation, Science and Economic Development Canada’s license-exempt RSS(s).
Operation is subject to the following two conditions:
- This device may not cause interference
- This device must accept any interference, including interference that may cause undesired operation of the device.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter