ZEISS DTC 450 Thermal Imaging Accessories Instruction Manual

: June 23, 2024
: Zeiss

Table of Contents

ZEISS DTC 4 | 50
- Safety and regulatory information
  - SAFETY INSTRUCTIONS AND REGULATORY INFORMATION
- References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

ZEISS DTC 4 | 50

Safety and regulatory information

Patents: www.zeiss.com/cop/patents

SAFETY INSTRUCTIONS AND REGULATORY INFORMATION

Safety instructions for handling when used with a riflescope on a

firearm

Check the legal and regional regulations in your country before using the ZEISS DTC 3 with a riflescope.
If the ZEISS DTC 3 is connected to an optical device used on a firearm, always ensure that the firearm is unloaded when mounting the ZEISS DTC 3.
Before using, ensure that your riflescope and the ZEISS DTC 3 are in proper working condition.
Test the correct setting of the point of impact using controlled shots.
Improper or inaccurate mounting of the ZEISS DTC 3 on the riflescope may result in a shift in the point of impact, which may affect accuracy.
An incorrectly adjusted ZEISS DTC 3 may result in a considerable deviation of the point of impact.

Safety instructions for handling

Look through your riflescope to test if the optics provide a clear, undisturbed image.
If handled roughly, a maladjustment cannot be ruled out.
Never point the lens of the device directly at intense heat sources such as the sun or laser equipment. The objective lens and eyepiece can function as a burning glass and damage the interior components.
Protection class IP65 / IP67 is only achieved when all rubber covers are firmly closed.

Danger of swallowing

Do not place this device in the hands of small children. Incorrect handling can cause small parts to come loose which may be swallowed.

Safety instructions for battery

Handle the device with care: rough handling can damage the internal battery.
Do not expose the device to fire or high temperatures above 60°C.
Do not disassemble the device to access the battery. The battery is not meant to be replaced by the end user.
Only charge the device at temperatures ranging between 10°C and 40°C.
The battery capacity decreases when operated in a cold ambient temperature. This is not a fault and occurs for technical reasons.
Do not store the device for long periods at temperatures below 0°C or above 35°C. This permanently reduces the capacity of the battery.

Safety instructions for the power supply unit

Check your power supply unit (not included in delivery package) and cable for visible damage before use.
Do not use defective parts and observe the safety instructions for your power supply unit.
The power supply must meet the requirements for limited power sources according to IEC 62368-1.

For further information, please refer to the user manual and Quick Guide provided. Both are available on our website in the download center: www.zeiss.com/cop/downloads

Intended use

The device is intended for mounting in front of an optical device and for displaying heat signatures during nature observation, remote hunting observations and for civil use. This device is not a toy for children. Use the device only as described in the user manual. The manufacturer and the dealer accept no liability for damages which arise due to non-intended or incorrect use.

Legal and regulatory information

Frequency range of radio module: Bluetooth: 2402-2480 MHz
Power of radio module: 2.72 mW

Carl Zeiss AG hereby declares that the radio equipment types ZEISS DTC 3/25 and DTC 3/38 comply with the directives 2014/53/EU and 2011/65/EU. The full text of the EU declaration of conformity is available at: www.zeiss.com/cop/conformity

Some certification marks for standards supported by the ZEISS DTC 3 can be displayed on the screen of the ZEISS DTC 3. Select ,,System” in the main menu. Then navigate to ,,Regulatory Infos”.

Disposal of batteries

In the European Union, this symbol indicates that the battery used in this product may not be disposed of in domestic waste and must be collected for disposal separately. When returning used batteries, please use a collection system that may exist in your country and refer to qualified personnel to have the battery removed from the device. You will find instructions for removing the battery at www.zeiss.com/cop/recycling.
The materials and substances in the battery may have a detrimental impact on health and the environment.
By depositing empty batteries at a recycling facility, you contribute to the protection and conservation of our environment.
Please only return discharged batteries.
The battery used does not contain mercury, cadmium or lead in quantities exceeding the limits defined in Directive 2006/66/EC.

User information on the disposal of electrical and electronic devices

(private households)

The WEEE symbol on products and/or accompanying documents indicates that used electrical and electronic products must not be mixed with ordinary household waste. For proper treatment, recovery and recycling, take these products to the appropriate collection points where they will be accepted without charge.
In some countries, it may also be possible to return these products to your local retailer when you purchase a corresponding new product.
The proper disposal of this product serves to protect the environment and prevents possible harmful effects on human beings and their surroundings, which may arise as a result of incorrect handling of waste.
More detailed information on your nearest collection point is available from your local authority. In accordance with state legislation, penalties may be imposed for the improper disposal of this type of waste.

For business customers within the European Union

Please contact your dealer or supplier regarding the disposal of electrical and electronic devices. He will provide you with further information.

Information on disposal in other countries outside of the European

Union

This symbol is only applicable in the European Union. Please contact your local authority or dealer if you wish to dispose of this product and ask for a disposal option.

Carl Zeiss AG
Consumer Products division
Carl-Zeiss-Strasse 22
73447 Oberkochen
Germany

www.zeiss.com/consumer-products

Regulatory information for USA and Canada

USA
FCC ID: 2AMSP-DTC450
PMN: DTC 4/50

This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user`s authority to operate the equipment.

NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

To comply with RF exposure requirements, a minimum separation distance of 0.00 cm must be maintained between the user`s body and the handset, including the antenna.
This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment.

Name of Responsible Party
Carl Zeiss SBE, LLC / Consumer Products
ZEISS Group
One North Broadway, Suite 1501
White Plains, NY, 10601
USA
Phone +1 800 858 6745

Self-Declaration of Conformity

We, Carl Zeiss Inc. hereby declare that this product was tested conforming to the applicable FCC rules under the most accurate measurement standards possible, and that all the necessary steps have been taken and are in force to assure that production units of the same equipment will continue to comply with the Commissions requirements.

Canada
IC: 22938-DTC450
PMN: DTC 4/50

Manufacturers self-declaration of compliance with ISEDs ICES standards: CAN ICES-3 (B)/NMB-3(B)

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s).
Operation is subject to the following two conditions:
(1) this device may not cause interference
(2) this device must accept any interference, including interference that may cause undesired operation of the device.
To comply with RF expose requirements, a minimum separation distance of 0.00 cm must be maintained between the user`s body and the handset, including the antenna.
This device complies with ISED RF radiation exposure limits set forth for an uncontrolled environment

Carl Zeiss AG
Consumer Products
Carl-Zeiss-Strasse 22
73447 Oberkochen
Germany

www.zeiss.com/consumer-products

Printed in Germany 000000-2586-431 CZ 03/2023