Koolatron KCR45B Thermoelectric Heat Pipe Fridge User Manual

SUPER-KOOL 45
AC/DC Refrigerator

KCR-45B
User Manual

Features

The KCR45B uses a higher capacity heat pump unit in conjunction with heat pipe technology to provide the best possible performance. A heatpipe is a tube containing a small quantity of refrigerant under low pressure. At one end of the tube heat produced by the heat pump boils the refrigerant into vapour. This vapour moves rapidly to the other end of the tube where the vapour is condensed back into liquid form, from where the refrigerant drains back to the boiler. Due to the low pressure, the temperature of the heat pipe is only a little above ambient temperature.

Parts

1. Temperature Control Knob
2.  Light
3.  Cold Sink Fan Cover
4. Shelf
5. Light Switch
6. Legs
7. Door
8. Upper Hinge Cover

Important Safeguards

Before you use the fridge, please read this owner’s manual carefully.

• This appliance is for HOUSEHOLD / 110V AC use and for VEHICLE / 12V DC use. It is not designed for commercial or rental purposes.
• This device must be properly installed in accordance with the installation instructions before it is used.
• Never unplug the fridge by pulling on the power cord. Always grasp the plug firmly and pull straight out from the outlet.
• Repair or replace immediately, all electric service cords that have become frayed or otherwise damaged. Do not use a cord that shows cracks or abrasion damage.
• Unplug the fridge before cleaning or before making any repairs.
• Do not operate the fridge in the presence of explosive fumes.
• The wall outlet must be properly grounded.
• Do not use the unit in the immediate surroundings of a bath, shower, pool or standing water.
• This refrigerator uses thermoelectric refrigeration technology (no compressor) and is not designed for storage in hot areas like garages, warehouses or outdoors since it is designed to operate at a maximum of 45°F (25°C) below the ambient temperature.
• Before discarding or storing, we recommend that you remove the door and leave the shelves in place. This will reduce the possibility of danger to children.

NOTE: If for any reason this product requires service, we strongly recommend that a certified technician perform the service.
Use of extension cords
Because of potential safety hazards under certain conditions, we strongly recommend against the use of an extension cord. However, if you must use an extension cord, it is absolutely necessary that it be a UL-listed (in the U.S.) or a CSA-listed (in Canada), 3-wire grounding type appliance extension cord having a grounding type plug and outlet and that the electrical rating of the cord be 15A (minimum) and 120V.

Installation

Before you use the fridge

• Remove the exterior and interior packaging, including protective foam on door panels.
• Check to be sure the following parts are included: 1 slide-out shelf and 1 user manual
• Clean the interior surface with lukewarm water using a soft cloth.

Installation of your fridge

• This appliance is designed to be free standing only, and should not be recessed or built-in.

• Place your appliance on a floor that is strong enough to support the appliance when fully loaded. To level your appliance, adjust the legs at the front of the appliance.

• Best performance is achieved by allowing some space around the back and / or sides of the appliance. This will allow air circulation

• Locate the appliance away from direct sunlight and sources of heat (stove, heater, radiator, etc.). Direct sunlight may affect the acrylic coating and heat sources may increase electrical consumption.
  Extreme cold ambient temperatures may also cause the appliance not to perform properly.

• Avoid locating the appliance in moist areas.

• Plug the appliance into a properly installed grounded 110V wall outlet, using the AC cord or 12V vehicle outlet, using the DC cord. Do not under any circumstances cut or remove the third (ground) prong from the power cord. Any questions concerning power and/or grounding should be directed toward a certified electrician or an authorized products service center.

Warning! Improper use of the grounded plug can result in the risk of electrical shock. If the power cord is damaged, have it replaced by an authorized products service center.

• After plugging the appliance into a wall outlet, allow the unit to cool down for 2-3 hours before placing food in the refrigerator.

DANGER! RISK OF CHILD ENTRAPMENT PROPER DISPOSAL OF THIS REFRIGERATOR
Child entrapment and suffocation are a problem with junked or abandoned refrigerators. If you are getting rid of your old refrigerator, please follow these instructions to help prevent accidents. Take off the door, but leave the shelves in place so that children may not easily climb inside.

Operating Instructions

Interior Light
This refrigerator is provided with a LED light located on the upper right hand corner of the compartment.
The light will be on when the door is opened and be off when the door is closed.
Temperature Control

• Your refrigerator has only one control for regulating the temperature. The temperature control is located on the upper right hand of the compartment.
• To control the internal temperature, adjust the control knob according to the ambient temperature or purpose of use.
• The first time you turn the unit on, set the temperature control to “ Max ”.
• The range of the temperature control is from position ” Min ” to “ Max ”. After 2 hours, adjust the temperature control to the setting that best suites your needs. The middle setting should be appropriate for home or office refrigerator use.

Maintenance

Cleaning

• Unplug the unit, and remove all items.
• Wash the inside and shelf with a warm water and baking soda solution. The solution should be about 2 tablespoons of baking soda to a quart of water.
• Wash the shelf with a mild detergent solution.
• The outside of the fridge should be cleaned with mild detergent and warm water.
• It may also be necessary to periodically wipe the bottom part of the storage area, as the Unit is designed to retain humidity, and condensation may collect there.

Maintenance

• Power Failure

Most power failures are corrected within a few hours and should not affect the temperature of your unit if you minimize the number of times the door is opened. If the power is going to be off for a longer period of time, you need to take the proper steps to protect your contents.

Vacation Time
During long absences, remove all items; unplug, clean, and leave the door open slightly to avoid possible formation of condensation, mold, or odors.
Moving

• Remove all items.
• Securely tape down shelf.
• Turn the levelling screws up to the base to avoid damage.
• Tape the doors shut.
• Be sure the unit stays in the upright position during transportation.

Troubleshooting

PROBLEM
Unit does not operate.
Not plugged in.
The circuit breaker tripped or blown fuse.
The temperature control is set at “OFF” position.
Unit is not cold enough.
Check the temperature control setting.
The room temperature is hotter than normal.
The door is opened too often.
The door is not closed completely.
The door gasket does not seal properly.
The unit does not have the correct clearances.
Abnormal voltage.
The light does not work.
Not plugged in.
The circuit breaker tripped or a blown fuse.
The LED light has burned out.
Vibrations.
Check to assure that the unit is level.
The door will not close properly.
The unit is not level.
The gasket is dirty.
The shelves are out of position.
TECHNICAL SPECIFICATIONS
For detailed specifications, please refer to the nameplate at the back of the Unit.
The specifications are subject to change without prior notice due to products improvement.

WARRANTY

Koolatron Corporation warrants that this product will be free from defects in materials or workmanship under normal household use for a period of 1 year from the date of retail purchase. During this time, defective products will be repaired or replaced at the discretion of the retailer and/or Koolatron Corporation.
This warranty covers normal household usage and does not cover damage which occurs in shipment or results from accident, misuse or abuse, unauthorized repair or alteration, improper maintenance, commercial use, or use with a voltage converter or after market accessories. A Koolatron Master Service Centre must perform all warranty work.
WARRANTY AND SERVICE PROCEDURE
Keep your original, dated, sales receipt with this manual. If this product proves to be defective within the warranty period, please contact Koolatron Corporation at 1-800-265-8456 (North America) or email service@koolatron.com for assistance.
Register online at www.koolatron.com and add another 6 months of warranty protection.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>