Genius Scorpion M8250 Multi-Language Gaming Mouse User Guide
- June 21, 2024
- GENIUS
Table of Contents
Scorpion 48250
Multi-language Quick Guide
Copyright® KYE SYSTEMS CORP.
Overview
Button Assignment
Connection Process
Mouse Button Functions:
A. Button 1: mouse left button, for mouse click, double click, or drag.
B. Button 2: mouse night button
C. Button 3: middie button with wheel, scroll to surf the Internet or
documents up or down.
D. Button 4, §: Forward or backward; scroll up or down the page, respectively.
E. Button 6: DPI button. Press to select dpi 800 / 1200 (default) / 1600 /
2400 / 3200 dpi. The dpi higher, the cursor faster.
F. Call Al Copitot (only for Windows 11 or above)
– To activate A! Copilot: Long press Button 4+DP1 button: , then Ai Copilot
window appears. Start to type to ask Copiiot.
– To activate microphone for Al Copilot. Long Press Button 5+DP1 button: ,
then the microphone input dialog appears. You can start to talk instead of
typing.
How to Start
STEP 1 : First, select either 2.4G of BT connection from the Mode switch
(A) at the left side on the bottom cover.
STEP 2: If select 2.4GHz mode (Green light flashes), plug the USB
receiver into USB port of your computer, and start to work.
If select BT mode (Biue light flashes), pairing to host is need.
To pair to host, open Bluetooth wireless of your host. Then, slide the Mode
switch of the mouse bottom to BT position. Then hold down the middie and right
keys together for 3 seconds and the blue light flashes quickly to enter
Bluetooth pairing mode. The mouse name of BT pairing Genius BluetoothM1
appears. Choose it from the host. The mouse BT Pairing process to the host is
done.
STEP 3: Turn to OFF Position(A) while not in use to save power.
Start working
Mode switching: Slide switch of the bottom (A) to switch 2.4GHz/BT
Backlight effect LED (B)switch button (8 lighting modes)
- True color flowing light
- Colorful breathing
- Nine color lucky wheel
- Neon
- Colorful waves
- Rainbow flashes
- Gyroscope rotation (dual color)
- Coverage
*Turn off/on backlight: Press and hold the DPI button for 5 seconds to turn off/on the backlight.
FCC Warning Statement:
Changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment. This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
FCC Radiation Exposure Statement
The device has been evaluated to meet general RF exposure requirement. The
device can be used in portable exposure condition without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>