PHILIPS TT Series GreenSpace Downlights Instruction Manual

June 21, 2024
Philips

PHILIPS Logo MY CREATION
GreenSpace IA4 IA5

(TT series)

TT Series GreenSpace Downlights

PHILIPS TT Series GreenSpace Downlights - Figure 1

PHILIPS TT Series GreenSpace Downlights - Figure 2

The housing of the luminaire has been reviewed and approved as an IP54 enclosure.PHILIPS TT Series GreenSpace Downlights - Figure
3

PHILIPS TT Series GreenSpace Downlights - Figure 4 The luminaire shall, under no circumstance, be covered with thermal insulation matting or similar material.PHILIPS TT Series GreenSpace Downlights - Figure
5

PHILIPS TT Series GreenSpace Downlights - Figure 6

Inrush current
PHILIPS TT Series GreenSpace Downlights - Figure 7

| 20 W SR| 36 W SR
---|---|---
| Electrical characteristics
Imax (A)| 6.7| 9
Tref (ps)| 30| 25
MCB| Luminaires max.
B-10 A| 63| 20
B-13 A| 81| 25
B-16 A| 100| 32
C-10 A| 104| 33
C-13 A| 135| 43
C-16 A| 170| 54

Disconnect before servicing
Luminaire has basic insulation between Low Voltage supply and control conductors.
The control gear and/or the external flexible cable contained in this luminaire shall only be replaced by the manufacturer or his service agent or a similar qualified person. The light source contained in this luminaire is not replaceable, in case of damage replace the luminaire.
Storage, installation, use, operation and maintenance of the products needs to be performed exactly according the instructions in this manual and/or other instructions as may be provided by us to guarantee safe use of the product over its entire lifetime. Failure to adhere to these instructions will invalidate your entitlement to warranty. Bolts with indication of torque strength on the drawing need to be tightened using a calibrated torque wrench. Pre-assembled bolts need to be retightened again to the required torque specification to assure maximum strength over lifetime.
This product contains a light source of energy efficiency class: see table or label.
Disposal of the product.
This product is made of high quality materials and components that can be recycled and reused. If a product is marked with the crossed-out circular garbage can symbol shown here, it means that it is subject to the European Directive 2012/19/EU. You should check the information about local facilities collecting used electrical and electronic products and their packaging on your own. Local regulations prohibiting the discarding of equipment and packaging together with municipal waste must be strictly observed. Proper disposal of used packaging and product will help to avoid potential harmful eff ects on the environment and human health.

Data subject to change without notice
Keep for future reference: https://pro.mycreation.lighting.philips.com/

PHILIPS Logo4422 948 61747
2023-07-18
© 2023 Signify Holding. All rights reserved

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals