TIMBERK E1 Ultrasonic Humidifier Instruction Manual

: June 20, 2024
: TIMBERK

TIMBERK E1 Ultrasonic Humidifier

Ultrasonic Humidifier

INSTRUCTION MANUAL

Dear customer!

We thank you for your wise choice and for a purchase of an ultrasonic humidifier. It will serve you for a long time.

1. IMPORTANT INFORMATION

Please, read this manual before using the device. This manual contains important information regarding your safety, as well as recommendations concerning the correct use and maintenance of this appliance. Keep this manual together with a warranty card, cash register receipt and, if possible, carton and packaging material. This instruction manual describes different types of this device. The device you purchased may differ slightly from the description in the manual, which does not affect the methods of use and operation. The manufacturer reserves the right to make minor changes to the device without additional notice which is not fundamentally affect its safety, performance and functionality. There may be some misprints in text and digital notations in the present manual.

IMPORTANT!

Important safeguards and descriptions contained in this manual do not include all possible situations that you may experience using the device. The manufacturer is not responsible for damage of the appliance or its parts during transportation, as a result of incorrect installation or voltage fluctuations, as well as when any part of the appliance has been changed or modified.

NOTE
There is a label on the device which has all the necessary technical data and other useful information about the device. Use the appliance only for the purpose specified in this manual.

2. SAFEGUARDS

Observe these safety rules when operating the device. Improper operation by ignoring the safeguards may result in damage to the health of the user and other people, as well as damage to their property. The manufacturer is not responsible for damage to health and property damage resulting from improper installation and operation of the device.

1. Read these instructions carefully before using the appliance to avoid damage during use.
2. Before starting up for the first time, check that the specifications on the product comply with the power supply specifications.
3. The appliance must be monitored during its operation, especially if there are children nearby. Children must be supervised to prevent playing with the appliance.
4. The device is not intended for use by persons (including children) with reduced physical, sensory or mental abilities or in the absence of their life experience or knowledge, unless they are supervised or instructed on the use of the device by the person responsible for their safety.
5. Use only for domestic purposes in accordance with this instruction manual. The device is not intended for industrial use.
6. The humidifier must not be operated if its power cord is damaged, or if the humidifier is defective, damaged in case of a fall or other circumstances. The humidifier should only be operated fully assembled.
7. Do not attempt to repair the device or change its parts by yourself. To repair the product, contact an authorized service center.
8. If the power cord or plug is damaged, to avoid danger, it must be replaced by the manufacturer, authorized service center, or similar qualified personnel.
9. To avoid burns, do not touch the humidifier membrane, while it is operating. Due to the high oscillation frequency, the membrane becomes very hot.
10. To avoid risk of electric shock, do not place the power cord near heating appliances or flammable or combustible substances.

11. Remove the electrical plug from the power outlet in the following cases: before draining or filling the tank with water; before assembly, disassembly and cleaning, or if you do not use it; before mounting/dismounting the humidifier elements; before moving the humidifier to another location. Install the humidifier on a flat, dry surface.
12. When disconnecting the appliance from the mains, do not pull on the power cord, grasp the plug. Do not twist and do not wind it on anything.
13. Humidifier’s steam can damage the surfaces it touches. Do not install the humidifier on the floor, or in the vicinity of heating appliances, walls, furniture, or other items.
14. The manufacturer and seller are not responsible for damage caused by improper positioning of the humidifier. The humidifier should be installed on any elevation, for example, on a table, stand, etc. at least 60 cm from the floor and at least 10 cm from the wall.
15. Do not put the humidifier in water or other liquids.
16. Do not install the humidifier in the corridor or in other places where it may be hit, knocked over, etc. If the humidifier is not in use, disconnect it from the power supply.
17. Do not lay the power cord under carpets or other objects. Position the humidifier so that the cord can’t be accidentally touched. Make sure that the power cord does not touch sharp edges or hot surfaces.
18. Do not use outdoors or in high humidity areas. Excessive humidity in the room can cause water to condense on windows and furniture. If this happens, turn off the humidifier.
19. Do not allow foreign objects to enter the humidifier.
20. Do not sit, stand, or place heavy objects on the humidifier.
21. To prevent damage to the humidifier, do not add essential oils, preservatives, flavorings, or other impurities to the water in humidifier. The manufacturer and seller are not responsible for the damage to the humidifier in case of ignoring this warning.

NOTE
High-frequency vibrations of the membrane of the ultrasonic humidifier are not audible and are completely safe for people and pets.

22. If the device was at a temperature below 0ºC for some time, it must be kept at room temperature for at least 2 hours before turning it on.
23. Do not use accessories that are not supplied.

3. APPOINTMENT OF THE DEVICE

A humidifier increases relative air humidity in a room and stabilizes its

microclimate, allowing to avoid harmful conditions of low humidity. Comfortable conditions are achieved at relative air humidity of 40 to 60%. Insufficient air humidity results in dehumidification of mucous membranes which is the cause of decrease in immunity, head ache, cracking of lips, “sandpaper” in the eyes, also insufficient air humidity enables development of infection and causes respiratory illnesses, fatigue, increased eye fatigue and worsening of concentration, and has negative effect on pets and indoor plants, causes increased dust generation and electrostatic charging of synthetic fabrics.
4. SPECIFICATIONS

Specifications of the device are shown in Table 1.

Table 1

Parameters| Units| THU UL 43 E (E1)
THU UL 43 E (E2)
---|---|---
Capacity of humidity| ml/h| 300
Power supply| V/Hz| 220-240~/50
Water tank volume| L| 3.0
Rated power
consumption| W| 23
Rated current| А| 0.224
Noise level| dB(А)| ≤ 35
Moisture protection
class| –| IPX0
Electrical protection class| –| Class II
Device dimensions| mm| 215x146x275
Net weight| kg| 1.17

5. DEVICE DESCRIPTION

**Fig. 1**
The appearance of the device may differ from the images in the manual

1. Water filling cap
2. Tank cover
3. Filler
4. Spray nozzle
5. Aroma box
6. Tank
7. Float rod
8. Display screen

6. DELIVERY SET

1. Ultrasonic humidifier – 1 pc.
2. Brush – 1 pc.
3. Instruction manual – 1 pc.
4. Warranty card – 1 pc.
5. Packaging – 1 pc.

7. FILLING THE WATER TANK

1. Place the device on flat and dry surface. Unplug the device (fig. 2)
2. Remove the water filling cap and pour the water inside the water tank (fig. 3)
3. Don’t pour the water above max water level which is indicated on the mist outlet tube inside the water tank (distance between water and mist outlet should be at least 10mm) (fig. 4)

4. Close the water filling cap and plug in the device (fig. 5)

Ultrasonic Humidifier

IMPORTANT!

For the operation of the device, it is better to use purified water from household water filter. It is necessary for the life time of the humidifier. With purified water there will be no white spots around the device.
White spots around the device are a salt of calcium and magnesium, which are part of ordinary tap water. When using unpurified water, they are discharged with steam and deposited on surrounding objects and surfaces. Although these substances are safe for people, in large quantities they can have harmful effects on furniture.

Do not fill the tank with other liquids but filtered tap water. Different composition of liquids has harmful effect on internal parts of the device and causes malfunctions.
Do not fill the unit or the water tank with such additives as essential oils, fragrances, cleaning agents, chemical medical drugs, warm water (above 40°), etc. Otherwise, the water tank and internal parts of the unit will be damaged and inoperable. Do not fill water directly into the internal parts of the unit or the atomizer.
Water inside the unit may cause malfunctions of the unit.
Do not hit or throw the water tank. It may get damaged resulting in water leaks. Do not use the unit in case if the water tank is heavily hit. Immediately contact the technical support service or the maintenance and repair station.
Every day fill the tank with fresh filtered water and keep the unit clean.

8. OPERATION OF THE DEVICE

Control panel

– On/Off

– Steam intensity adjustment / SLEEP mode

– Timer settings

– Constant humidity switch

Switching on

Install the appliance vertically on a flat and dry surface, fill the tank with water then connect the device to the power line. Press the button. The device will start to operate in low steam intensity mode. At the very beginning of operation, the atomizing level may appear unstable, which is caused by the temperature difference and water quality. It will take a short period time for this process to stabilize.

Adjusting steam outlet intensity

Press the button to adjust steam outlet intensity and select SLEEP mode. After turning on the device, it will operate in low steam intensity mode. Press the button one time to select medium steam intensity. Press the button again to select high steam outlet intensity. Press the button third time to enter SLEEP mode.

The more steam comes out, the stronger and faster air humidification will be. Comfortable conditions are reached at 40 to 60% relative air humidity. You can yourself determine the comfortable humidity level or use hygrostat function by pressing the button.

ATTENTION!

If a large amount of condensate is generated on the upper part of the appliance when it is operating, then you need to decrease the steam outlet intensity by turning on/off and steam outlet intensity knob counterclockwise.

ATTENTION!

In case of water shortage the button will light in red.

SLEEP mode

In this mode, the device will operate in high steam intensity mode by the following cycle:
5 min. operation – 5 min. pause – 5 min. operation – 10 min. pause – 5 min. operation – 15 min. pause

When the device is in SLEEP mode all indicator will be off, except SLEEP indicator – .

TIMER function

Press the button to select shutdown time. Time can be selected in the following order: 1H/2H/4H/8H.

Constant humidity settings (hygrostat function)

During operation of the device press the button to select required relative humidity level. Relative humidity level can be selected in the range from 40% to 90%. One press of the button equals 5%, During the setting process, selected humidity level will flash on the display. When the room humidity reaches the set level, the device will turn off automatically.

Adding essential oils

Pour three or five drops of essential oil in the aroma box (aroma box is located under the water filing cap. It has the cloth on which the oil must be put). After adding, outlet steam will contain the smell of essential oils.

Ultrasonic Humidifier

ATTENTION!
Add the essential oil only in the aroma box
Don’t pour the oil directly in the water
Water-soluble essential oils must be used

Switching off

Press the button to turn off the device. Unplug the power cord.

9. CLEANING AND MAINTENANCE

Before cleaning the appliance, make sure it is unplugged. Otherwise, it may result in electric shock.
Before cleaning, in order not to burn your hands, wait until the water in the base of the appliance has completely cooled.
Use a damp and soft cloth to wipe the outside of the appliance.
To avoid electric shock, do not scratch or damage the components of the device when cleaning.
Do not use solvent, gasoline, dimethylbenzene, hard brush, talcum powder and other substances when cleaning the device.
Wipe off any remaining water inside the base of the unit under the tank with a damp and soft cloth.
To remove water on small parts, you can use a brush and then wipe them again with a soft cloth.
Clean the device once or twice a week.
If dirt is formed on the membrane, clean it with a brush.
Rinse the water tank cover and nozzle carefully and effortlessly with fresh water, otherwise this will cause water to leak through the cover.
After removing any remaining water from the surface of nozzle, wipe it with a soft cloth.
Clean the outside of the appliance with a damp and soft cloth.

IMPORTANT!

To avoid deformation of working surfaces, resulting in decreased atomizing or other malfunctions, do not use metallic brushes, blades or talc powder to wipe the atomizer’s surface.
The water tank may leak after heavy impacts.
In case of water leakage, immediately stop using the unit and contact an authorized service center.
To keep the unit dry, wipe the water after cleaning and dry the unit’s base and water tank. Make sure that there is no water left inside the unit’s base and water tank.
Before a long break in use, dry the base and the tank, but the tank on the base and pack the device in a plastic bag, then put it in a box.
Store the unit in a low-humidity room.
Storing the unit undried results in generation of mold.

To clean the water tank and parts of the base of the device from salt deposits, use citric acid:

for 1 liter of hot water, take 1 tablespoon of citric acid and mix well;
pour the solution into the tank and put it on the base of the humidifier (water from the tank will automatically fall into the base of the device);
leave the humidifier for 10-12 hours – do not turn it on;
after the time has passed, remove the solution from the device along with the exfoliated parts of the salt coating;
if it is difficult to remove plaque – use a special brush for the base of the humidifier (if this is not supplied, you can use a toothbrush). For the tank – pour 0.5-1 cups of dry rice into cold water or a cooled citric acid solution and shake until the plaque is peeled off;
rinse all internal parts of the device with cool water;
use a humidifier as usual after the procedure.

10. TROUBLESHOOTING

Malfunction	Possible cause	Solution
Poor atomizing (insufficient productivity)	The unit is operating in
the low atomizing mode (low atomizing frequency)	It is not a malfunction.

Switch the device into the intensive mode of operation
The atomizer is clogged| Clean the atomizer.
Temperature of water in the tank is low| Set maximum productivity mode. The humidifier’s productivity will
go up after a while.
No atomizing| The power cord is poorly
connected to the outlet| Connect the power cord into
the outlet carefully
There is white patches from the water on objects around the
humidifier (salts, separating out from water)| White patches have formed on the membrane| Clean the humidifier’s membrane with a special brush
There is a lot of salts in the water (calcium and magnesium)| Use filtered water
Steam has a bad smell| Stale water is used| Clean the unit according to the cleaning and servicing instructions and fill the tank
with fresh and filtered water
Remains of stale water or waste have accumulated in the unit’s
case or the atomizer
During the operation of the device, condensate is forming on
the upper part of the humidifier and on surrounding objects| High humidification intensity is
set.| Decrease the humidification intensity
Room humidity and
room temperature are high
During the operation of the device water appears next to it| High humidification intensity is set.| Decrease the humidification intensity
The water tank is badly installed on the unit’s base and there is a gap between them.| Turn off the unit and make sure the water tank is installed correctly on the base, without any gaps between the tank and the
base.
White patches have formed on the membrane and in grooves for
water (in the unit’s base).| Clean the unit according to the cleaning and servicing
instructions.
Water appears next to the
humidifier, when it is off| Water tank is leaking| Contact an
authorized service center

11. UTILIZATION RULES

After the lifetime of the device expires, it should be recycled in compliance with the laws, rules and methods in region of recycling. Detailed information about the recycling of the device, you can receive from a representative of the local authorities, after providing full information about the device. The manufacturer and authorized organization of the manufacturer do not carry responsibility for the fulfillment by the Buyer of the requirements of legislation on utilization and methods of utilization of the device selected by the Buyer. The lifetime of the device is indicated in the warranty card. Warranty period for the device and warranty terms are specified in the warranty card. The warranty card is an integral part of the documentation supplied with this unit. If there is no warranty card in the delivery set, ask for it from the Seller. The warranty card provided by the Seller must conform to the manufacturer’s form.

The manufacturer and the authorized organization of the manufacturer remove responsibility for any possible harm which can be caused to people, animals or property directly or indirectly, if this harm occurred as a result of noncompliance with the rules and operating conditions, installation of the device, intentional or reckless actions of the user- and / or third parties, as well as in situations caused by natural and / or anthropogenic accidents.

12. TRANSPORTATION AND STORAGE

1. During transportation, any possible impacts and movements of the package inside the vehicle should be excluded.
2. Transporting and storage should be provided in strict accordance to the manipulation marks.

Temperature
Requirements| Transportation and storage| From -30°C up to +50°C
---|---|---
Humidity
Requirements| From 15% up to 85%
(without condensate)

We are exploring new technologies and we constantly improving the quality of our products. That’s why specifications, design and accessories are subject to change without any specific notice.