Kitchenwell KN312 Power Blender Juicer User Manual

Table of Contents

Kitchenwell KN312 Power Blender Juicer User Manual

Safety precautions before use

Read the instructions before use.
Do not put metal objects such as knives, forks, spoons, etc. into the cup.
When cleaning, do not clean the knife directly by hand.
The contents of the cup should not be too full. Do not exceed two thirds of the capacity of the cup. Please close the lid of the cup when using.
Before starting, make sure the cup is on the base. It is completely fixed on.
Because of the high horsepower, please hold the cup slightly when you start to use it.
Be sure to cover the cup when using the stirring bar while the motor is running.
Whether the cup is placed on the table or not, do not use your hand to fetch food from that cup because the blade is sharp and can hurt you easily.
To pour food out, remove the cup from the frame.
Be careful to touch the switch before and after start-up.
Utensils cannot be immersed in water.
Remember to pull off the plug when not in use.
Do not lift the lid of the cup until the stirring knife has completely stopped rotating.
Be sure to separate the frame from the cup when cleaning and make sure to pull off the plug first.
Do not immerse the motor base in water or put it in the dishwasher for cleaning.
Keep a proper distance especially during the start-up stage to prevent the child from improper use. If the power cord is damaged, it must be replaced by a professional in the manufacturer’s maintenance department or similar department in order to avoid danger.

Kitchenwell KN312 Power Blender Juicer User Manual - Product
details

User Manual

Cut the ingredients into 5 cm pieces, put the right amount of ingredients into the mixing cup and add the right amount of water according to personal needs.
Put the lid on the mixing cup tightly, and then put the mixing cup on top of the machine.
Put the machine on a flat worktable and plug in the power cord. The display screen will always be on 0000.
Click the “function” button, and the indicator light under the “juice” icon is on.
Click the “on/off” button, the “juice” icon indicator light flashes and starts to work accordingly.
At the end of the work, the system will sound “drip”. At this time, you can pick up the mixing jar and pour out the juice.

Standby

After the system is powered on, the machine will sound a “drip”, all the indicator lights and digital screens will be on.
When the indicator lights are off, the digital screen will display “0000”, and the system will enter the standby mode.

Function

In the standby mode, click the “function” button to select different functions.
Every time you click, the machine will sound “drop”.
When the indicator light under the function icon is on, the function is selected.

ON/OFF

When one of the function indicator lights is on, click the “on/off” button, the machine will sound a “drop”, the indicator of this function will flash, and the system will start to work according to the default mode of this function; At the end of the work, the machine will sound a “drop” again, and the indicator light of this function will turn back to normal light; At this time, if you need to start this function again, click the “on/off” button again.
When the “pulse” function is not working, click the “on/off” button to stop this function.

Pulse

In standby mode, long press the “pulse” button for 1s, and the system will start working immediately.
At this time, if the “pulse” if released, the system will stop working immediately.
The working time of each long press of pulses is limited to 30s. After 30s, the system will automatically stop working.
If you need to restart, release the button and press the “pulse” key again, the working time limit is still 30s.

Rotary knob

In the standby mode or when the indicator light under the timing function icon is on, rotate the knob, and the digital time screen will cycle by 010, 020… 080, 090 for you to select the time;
After the timing function is started, rotate the knob, and the digital screen of speed will show 1,2,3… 8,9 accordingly. 3. Click the knob to realize the function of “on/off” button.

Timing

When the indicator light under the timing function icon is on, you can rotate the knob to select the time, and the maximum working duration is 90s.
After selecting the required duration, click the “on/off” button or knob. The function indicator will flash, the digital timer screen will start to count down, and the system will start to work.
When the timing function starts to work, you can rotate the knob according to your personal needs to make the system adjusted between the speed of 1-9.

Always pull off the plug when cleaning and maintaining.
Carefully scrub the cup body and lid with a dry sponge or dry cloth.
Do not put your hand into the cup for cleaning.
Wipe the rotating shaft and motor base with a dry cloth (remember! Do not rinse with water).
When it is not easy to wipe, wipe it with neutral lotion, and then wipe it with dry cloth until it is clean.