tp-link T120100-2B1 Gigabit VPN Router Instructions
- June 20, 2024
- tp-link
Table of Contents
tp-link T120100-2B1 Gigabit VPN Router Instructions
FCC Compliance Information Statement
- Product Name: Gigabit VPN Router
- Model Number: Festa FR205
- Component Name: Model
- Power Adapter: T120100-2B1
- Responsible party: TP-Link USA Corporation
- Address: 10 Mauchly, Irvine, CA 92618
- Website: https://www.tp-link.com/us/
- Tel: +1 626 333 0234
- Fax: +1 909 527 6804
- E‑mail: sales.usa@tp‑link.com
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/ TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
- Product Name: Power Adapter
- Model Number: T120100-2B1
Responsible party:
TP-Link USA Corporation
- Address: 10 Mauchly, Irvine, CA 92618
- Website: https://www.tp-link.com/us/
- Tel: +1 626 333 0234
- Fax: +1 909 527 6804
- E‑mail: sales.usa@tp‑link.com
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/ TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. We, TP‑Link USA Corporation, has determined that the equipment shown as above has been shown to comply with the applicable technical standards, FCC part 15. There is no unauthorized change is made in the equipment and the equipment is properly maintained and operated.
Issue Date: 2024-03-27
CE Mark Warning
This is a class B product. In a domestic environment, this product may cause
radio interference, in which case the user may be required to take adequate
measures.
EU Declaration of Conformity
TP‑Link hereby declares that the device is in compliance with the essential
requirements and other relevant provisions of directives 2014/30/EU,
2014/35/EU, 2009/125/EC, 2011/65/EU and (EU)2015/863. The original EU
declaration of conformity may be found at https://www.tp-
link.com/en/support/ce/
UKCA Mark
UK Declaration of Conformity
TP-Link hereby declares that the device is in compliance with the essential
requirements and other relevant provisions of the Electromagnetic
Compatibility Regulations 2016 and Electrical Equipment (Safety) Regulations
2016. The original UK declaration of conformity may be found at https://www
.tp-link.com/support/ukca/
Canadian Compliance Statement
This device contains licence‑exempt transmitter(s)/receiver(s) that comply
with Innovation, Science and Economic Development Canada’s licence‑exempt
RSS(s).
Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
Specifications:
- Product Name: Gigabit VPN Router
- Model Number: Festa FR205
- Component Name: Power Adapter
- Model: T120100-2B1
Industry Canada Statement
CAN ICES‑3 (B)/NMB‑3(B)
Product Usage Instructions:
Regulatory Compliance:
To ensure compliance with FCC regulations, follow these guidelines:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit of different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules, ensuring it does not cause harmful interference and accepts any interference received.
Safety Information
- Keep the device away from water, fire, humidity or hot environments.
- Do not attempt to disassemble, repair, or modify the device. If you need service, please contact us.
- Do not use a damaged charger or USB cable to charge the device.
- Do not use any other chargers than those recommended.
- The adapter shall be installed near the equipment and shall be easily accessible.
- Place the device with its bottom surface downward.
- Use only power supplies that are provided by the manufacturer and in the original packing of this product. If you have any questions, please don’t hesitate to contact us.
- The operating temperature for the device shall be within 0˚C to 40˚C (32˚F to 104˚F). Please read and follow the above safety information when operating the device. We cannot guarantee that no accidents or damage will occur due to improper use of the device. Please use this product with care and operate at your own risk.
Explanation of the symbols on the product label
Note: The product label can be found at the bottom of the product and its
I.T.E. power supply. Symbols may vary from product.
Symbol Explanation
-
Class II equipment
-
Class II equipment with functional earthing
-
Alternating current
-
Direct current
-
Polarity of d.c. power connector
For indoor use only
- Dangerous voltage
Caution, risk of electric shock
-
Energy efficiency Marking
-
Protective earth
-
Earth
-
Frame or chassis
-
Functional earthing
-
Caution, hot surface
-
- Caution
-
Operator’s manual
-
Stand-by
-
“ON”/”OFF” (push-push)
-
Fuse
-
Fuse is used in neutral N
-
RECYCLING
This product bears the selective sorting symbol for Waste electrical and electronic equipment (WEEE). This means that this product must be handled pursuant to European directive 2012/19/EU in order to be recycled or dismantled to minimize its impact on the environment. User has the choice to give his product to a competent recycling organization or to the retailer when he buys a new electrical or electronic equipment. -
Caution, avoid listening at high volume levels for long periods
-
Disconnection, all power plugs
-
Switch of mini-gap construction
-
Switch of micro-gap construction (for US version) Switch of micro-gap / micro-disconnection construction (for other versions except US)
-
Switch without contact gap (Semiconductor switching device)
FAQ:
Q: What should I do if my device is not working properly?
A: If you encounter any issues with your device, please contact our support
team for assistance at +1 626 333 0234 or email us at sales.usa@tp-
link.com.
Q: Can I use a different power adapter with the device?
A: It is recommended to use only the power adapter provided by the
manufacturer to ensure optimal performance and safety.
References
- Link: Simple, secure one-click payments
- CE Regulatory Compliance | TP-Link
- Regulatory Compliance | TP-Link
- WiFi Networking Equipment for Home & Business | TP-Link