Monster Clarity HD Bluetooth Headphones Manual

Monster Clarity HD Bluetooth Headphones Manual

Get the most out of your equipment and enjoy great audio performance even at safe levels. Our headphones will allow you to hear more details at lower volume levels than ever before.

Learn how to establish a safe listening level and review other important safety guidelines from the Consumer Electronics Association at www.ce.org. Important information on how to prevent Noise-Induced Hearing Loss (NIHL) and a comprehensive list of which noises can cause damage can be found on the Deafness Research Foundation’s website, www.drf.org.

Physiology of the Ear and Hearing

For additional information on what loud noises do to your ear and more on protecting the ear, reference www.abelard.org/hear/hear.php#loud-music

Use Responsibly
Do not use headphones when it’s unsafe to do so—while operating a vehicle, riding a bike, crossing streets, or during any activity or in an environment where your full attention to your surroundings is required.

It‘s dangerous to drive while wearing headphones, and in many places, illegal because it decreases your chances of hearing life-saving sounds outside of your vehicle, such as another car’s horn and emergency vehicle sirens.

Please avoid wearing your headphones while driving.
Use one of Monster’s FM transmitters to listen to your mobile media devices through your car stereo instead.

Cleaning
Wipe earcups with a soft cloth dampened with a mild soap solution.

Using Finger Tip Controls
The surface of the right ear cup is a touch sensitive control surface. The center section (the logo) serves as a play/pause control. Tap once for play/pause also for answer/end.

Swipe motion on the touch pad works as a volume control. Swipe up for more volume, swipe down for less volume. Tap action anywhere on the touch pad works as track forward/track back control. Tap two times for the next track. Tap three times for the previous track.

Key Features and Parts
The headset contains the following parts:

Power/Charging
Before using the headset wirelessly, you need to charge the battery and pair the headset with a compatible device.

The package includes a Micro USB cable that can be connected to your computer or other device made for USB charging. You can use a standard USB compatible charging device that plugs directly into a wall socket, or you can plug the USB cable directly into a laptop or PC. Plug the Micro USB end of the included USB cable into the USB micro port charger connector under the right earcup of the headphone. Plug the other end into a USB port on your computer or other devices made for USB charging. The indicator light will be red while charging. Once fully charged, the LED will be off. Charge time is 2 hours on an empty battery. The fully charged battery has power for up to 20 hours talking and/or music time. In this mode you can listen to your headphones via Bluetooth wireless communication or through the 3.5mm audio in.

Pairing
1. Ensure that your phone or music player is switched on.

2. To pair the headset if it has not been previously paired with a device, switch on the headset, it will enter the pairing mode automatically and the blue and red indicator light starts to flash quickly. The headset is ready to pair with your device.

3. To pair the headset if it has been previously paired with another device, ensure that the headset is switched off, and press and hold the multifunction key (for about five seconds) until the blue and red indicator light starts to flash quickly.

4. Activate the Bluetooth feature on your phone or music player, and set it to search for Bluetooth devices.

5. Select “ClarityHD On Ear” from the list of found devices on your phone or music player.

6. If necessary, enter passcode 0000 to pair and connect the headset to your device.

Using ClarityHD On-Ear Without Battery Power
If your ClarityHD On-Ear headphone is not charged, Bluetooth wireless communication will not be available.

No Batteries Required
You can use your ClarityHD On-Ear headphone as a wired headphone to save batteries or if your batteries are not charged. Simply connect one end of the cable to the bottom of the earcup and the other to your wireless capable or wired MP3 player. By inserting an audio cable in this way, ClarityHD On-Ear wireless functionality is automatically disabled.

Disconnect the Headphone
To disconnect the headset from your device, switch off
the headset, or disconnect it in the Bluetooth menu of
your device.

Reconnect the Headphone
To connect the headset to the phone or music player that you last used with it, switch on the headset or make the connection in the Bluetooth menu of your device.

Headset Controls

*Action during call.

Headset Controls Listen to Music
To listen to music, connect the headset to a compatible music player that supports A2DP Bluetooth profile. The available music functions depend on your music player.
To play a song, select the song in the music player and press the play/pause key on the ClarityHD On-Ear Headset. To pause or resume playing a song, press the play/pause key.

If you receive or make a call while listening to music, the music is paused until the call ends.

GUIDE TO INDICATOR LIGHTS
Headphones “Break-in”
Break-in time for headphones? We’re kidding, right? No we’re not. Like any high performance product, whether it’s cars or headphones, they’re mechanical devices that settle in after use. Your new headphones will sound incredible out of the box, but will “mellow” out after use and sound even better. We recommend playing them for 8 hours. After 20 hours of playing, they should be fully broken in. Enjoy.

Battery
If applicable, battery must be recycled or disposed of properly.

Questions about your Monster Clarity HD Bluetooth Headphones ? Post in the comments!
Download Monster Clarity HD Bluetooth Headphones Manual [PDF]

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>