SANUS BSF517 Full Motion 4D Plus Shift TV Wall Mount for TV Instruction Manual
- June 16, 2024
- SANUS
Table of Contents
SANUS BSF517 Full Motion 4D Plus Shift TV Wall Mount for TV
WE’RE HERE TO HELP
Want to watch a video that shows how easy this is?
Watch it now at:
Get it right the first time. HeightFinder™ shows you where to drill.
Use it now:
Our live US-based install experts are standing by to help.
- Call us at:
- +1 800-359-5520
- Or, chat at:
IMPORTANT SAFETY INSTRUCTIONS
Please read through these instructions completely to be sure you’re comfortable with this easy install process.
Check your TV owner’s manual to see if there are any special requirements for mounting your TV. If you do not understand these instructions or have doubts about the safety of the installation, assembly or use of this product, contact Customer Service: +1 800-359-5520.
CAUTION: Avoid potential personal injuries and property damage!
-
This product is designed ONLY to be installed into wood studs, solid concrete or concrete block
-
DO NOT INSTALL INTO DRYWALL ALONE — DRYWALL ALONE WILL NOT HOLD THE WEIGHT OF YOUR TV
-
This product is designed for INDOOR USE ONLY
The wall must be capable of supporting five times the weight of the TV and mount combined -
Do not use this product for any purpose not explicitly specified by the manufacturer
-
Manufacturer is not responsible for damage or injury caused by incorrect assembly or use
TV Weight Limit
(including accessories)
DO NOT EXCEED
If your TV (plus accessories) weighs MORE, this mount is NOT compatible. Visit SANUS.com or call customer service to find a compatible mount. +1 800-359-5520
Wall Construction
ONLY install on these acceptable wall types.
Unsure
Call Customer Service
- +1 800-359-5520
Tools Needed
Dimensions
BEFORE YOU BEGIN
Supplied Parts and Hardware
WARNING: This product contains small items that could be a choking hazard if swallowed. Before starting assembly, verify all parts are included and undamaged. If any parts are missing or damaged, do not return the damaged item to your dealer; contact Customer Service. Never use damaged parts! NOTE: Not all hardware included will be used.
Attach TV Bracket to TV
STEP 1 Attach TV Bracket to TV
Attach TV Brackets to Your TV
- NOTE: Hanging tab H is oriented to the TOP of your TV.
- TIP: Before installing the TV bracket 04 , see height adjustment.
- CAUTION: Avoid potential personal injuries and property damage! DO NOT use power tools for this step. Tighten the screws 01 only enough to secure the TV bracket to the TV.
Wood Stud Installation
STEP 2A Attach Wall Plate
CAUTION: Avoid potential personal injury or property damage!
- Drywall covering the wall must not exceed 5/8 in. (16 mm)
- Minimum wood stud size: nominal 2 x 4 in. (51 x 102 mm) actual 1½ x 3½ in. (38 x 89 mm)
- Stud center must be verified
CAUTION: Avoid potential personal injury or property damage! Improper use could reduce the holding power of the lag screw 07 . Tighten the lag screws 07 only until they are pulled FIRMLY against the wall plate 06 \. DO NOT over- tighten the lag screws 07 . Go to STEP 3
Solid Concrete or Concrete Block Installation
STEP 2B Attach Wall Plate
CAUTION: Avoid potential personal injury or property damage!
- Mount wall plate 06directly onto concrete surface (no wall covering)
- Minimum solid concrete thickness: 8 in. (203 mm)
- Minimum concrete block size: 8 x 8 x 16 in. (203 x 203 x 406 mm)
CAUTION: Avoid potential personal injury or property damage! Improper use could reduce the holding power of the lag screw 07 . Tighten the lag screws 07 only until they are pulled FIRMLY against the wall plate 06 . DO NOT over- tighten the lag screws 07.
STEP 3 Hang TV onto Wall Plate
HEAVY! You may need assistance with this step
Manage Cables
IMPORTANT: Fully extend arm assembly 06 to ensure enough slack in cables.
- Slide to remove the cable covers C.
- Route your cables through the arm assembly 06.
- Reattach the cable covers C over the cables.
TV Adjustments
TILT ADJUSTMENT
Your TV should adjust easily when moved, then stay in place. If your TV is too
loose or too tight, adjust the side tension knob T by hand.
NOTE: Once your TV is in place, tighten the tension knob T to prevent unwanted
movement.
NOTE: Additional tension can be applied using a 5/32 inch hex key (not
supplied).
LEVEL ADJUSTMENT
HEIGHT ADJUSTMENT
- Remove the TV (see below).
- Remove screw S.
- Adjust the position of the hanging tab H . Slide tab H UP to LOWER your TV. Slide tab H DOWN to RAISE your TV.
- Secure with screw S .
- Rehang your TV
REMOVING THE TV
Thank you for choosing SANUS Elite! Please take a moment to let us know how we did:
- Call us: +1 800-359-5520
- Email us: [email protected]
- Leave a review: SANUS.com
Legrand AV Inc. and its affiliated corporations and subsidiaries (collectively, “Legrand”), intend to make this manual accurate and complete. However, Legrand makes no claim that the information contained herein covers all details, conditions, or variations. Nor does it provide for every possible contingency in connection with the installation or use of this product. The information contained in this document is subject to change without notice or obligation of any kind. Legrand makes no representation of warranty, expressed or implied, regarding the information contained herein. Legrand assumes no responsibility for accuracy, completeness or sufficiency of the information contained in this document. ©2024 Legrand AV Inc. All rights reserved. SANUS Elite is a brand of Legrand. SANUS Elite, HeightFinder and the Elite logo are trademarks of Legrand.Legrand AV Inc. • 6436 City West Parkway • Eden Prairie, MN 55344 USA