IASUS IA-RK-BA-BASIC-BT Wireless Helmet Speaker Ultimate Smart Co Pilot Instruction Manual

IASUS IA-RK-BA-BASIC-BT Wireless Helmet Speaker Ultimate Smart Co Pilot

MODEL NUMBER: IA-RK-BASIC-BT
Thank You for choosing the IASUS REKON Communicator Headset, a precision- crafted, functionally packed, personal communication device designed for your helmet.
In this manual, you will find instructions to operate your REKON Communicator Headset with Bluetooth-enabled devices. Should you have any questions and require assistance with setup and usage, please feel free to visit our website:
WWW.IASUS-CONCEPTS.COM

PACKAGE CONTENTS

1. RE KON Interface
2. Control Dial
3. Center Button
4. Quick Release Clip
5. LED Indicators
6. Interconnect Cable
7. Mount for REKON Interface
8. RE KON Base
9. Microphone
10. 3.5mm Audio Output Connector
11. Magnetic Charging Port
12. Connector from Helmet Speakers (Helmet Speakers not included)
13. Charging Cable
14. 3M Velcro Adhesive (Loop)
15. 3M Velcro Adhesive (Hook)

TIP: REKON comes charged and ready to use.

SPECIFICATIONS

ABOUT THIS MANUAL
Any references made to rotate the control dial to your left and right is from the viewpoint of wearing your helmet.

INSTALLING REKON INTERFACE

REKON Interface is designed to be positioned on the outside front section of your helmet through the use of a quick release clip mount for easy installation and removal.

INSTALLING REKON BASE

• REKON Base (8) can be installed inside the helmet either vertically or horizontally. Use the included Velcro adhesives for installation. The Velcro provides a quick release when removal is necessary.
• To allow REKON to fully capture your voice inputs, position the microphone (9) directly in line with your mouth.
• To maximize the microphone input capabilities, position the microphone (9) directly in line with your mouth.Provide sufficient space between the base and your mouth for both comfort and safety.

HORIZONTAL POSITION

1. Clean the mounting surface inside your helmet. Peel away the backing paper on the Hook Velcro (15) and attach it onto the REKON base.
2. Attach the Loop Velcro (14) horizontally to the inside of the chin guard. Position and install REKON Base onto the Velcro inside the helmet.

VERTICAL POSITION

1. Clean the mounting surface inside your helmet. Peel away the backing paper on the hook Velcro and place it onto the RE KON Base.
2. Attach the Loop Velcro vertically to the inside of the chin guard. Position and install REKON Base onto the Velcro inside the helmet.

DETACHING REKON

1. To unclip REKON Interface (1) from its mount (7), lift the quick-release clip (4) and slide RE KON to the side.
2. Then remove REKON Base (8) from its Velcro mount (14).

CHARGING REKON

• REKON comes shipped with its battery charged and ready to use. When charging is needed, connect the included USB cable (13) to the Magnetic Connector (11) located on the bottom of REKON Base.
• A full charge completes in about 90 minutes. The background LED on the Center Button will be red until it is fully charged, at which point turns blue.
• To extend the life of the battery, we recommend not using fast chargers (>S00mA). To avoid damage to the battery, refrain from draining completely to zero and leaving it uncharged for an extended amount of time. Keep RE KON fully charged if stored for extended periods of time.

The REKON battery is sealed inside the unit and is not user-serviceable. Please contact IASUS for issues with the battery. For proper disposal of this product at the end of its working life, consult your local laws for proper electronics and battery recycling and disposal. If you are not sure, do not deposit in unsorted waste but drop it of at your local or regional collection point for recycling to prevent any possible harm to the environment or human health.

3.SMM AUDIO OUTPUT CONNECTOR

REKON is equipped with a 3.5mm audio output connector that is optimized for the following IASUS audio accessories:

• XSound 3 – High-Definition Helmet Speakers
• XSound 2.1- Helmet Speakers
• iA Waterproof Earbuds
• Future IASUS helmet speakers and earbud products

BLUETOOTH PAIRING

1. TURN PAIRING MODE ON
   Press and Hold Center Button for at least 3 second until background LED flashes Red and Blue with an audible pairing tone.

2. PAIR DEVICE
   Find” REKON” in the Iist of available devices in the Bluetooth menu of the device you are pairing. The IASUS REKON uses standard Bluetooth 5.0 protocols. When paired with newer devices, there is no need to enter a passcode. For older Bluetooth-equipped devices, enter the code “0000”.

PAIRING A SECOND DEVICE

1. TURN PAIRING MODE ON
   The IASUS REKON allows for pairing with two Bluetooth-enabled devices at the same time (smartphone, GPS, mp3 player, etc.) To pair a second device, after REKON is paired with the first device, press and hold the Center Button for at least 3 seconds to get into pairing mode.

2. PAIR SECOND DEVICE
   Find “REKON” in the list of available devices in the Bluetooth menu in the device you are pairing. The IASUS REKON uses standard Bluetooth 5.0 protocols. When paired with newer devices, there is no need to enter a passcode. For older Bluetooth equipped devices, enter the code “0000”.

3. RECONNECT FIRST DEVICE
   Pairing the second device will disconnect REKON from the first device-this is normal. Go to your first device’s Bluetooth settings and manually reconnect to RE KON.

CONTROLS

REKON interface is carefully designed and built on 3 main user actions to achieve a minimalistic appearance, yet still able to perform full Bluetooth functions. Any references made to rotating the Control Dial to your left and right is from the viewpoint of wearing your helmet.

• Turning the Interface Dial to the left (counter-clockwise)
• Turning the Interface Dial to the right (clockwise)
• Pressing the clear Center Button

This RE KON Interface Dial is made of CNC aluminum and the Center Button cover from tempered glass. It is ergonomically designed to be easily operated, even with gloves.
The headset emits a beep tone to indicate a function has been activated by your input.

GETTING STARTED

MUSIC MODE

PHONE MODE

VOICE COMMAND

VOLUME LEVELS ON MUSIC MODE & PHONE MODE
During Music Mode (music playback), REKON’s volume level is adjusted independently of the phone’s Bluetooth playback volume. During a phone call, REKON’s volume and the phone’s volume are linked, following standard Bluetooth protocol.
TIP: If you experience low volume on Music Mode, be sure the volume is turned up on your phone as well as on REKON.
Example: When adjusting REKON’s volume in Music Mode, the phone’s Bluetooth volume is not affected. However, in Phone Mode, adjusting REKON’s volume during a call affects the phone’s Bluetooth volume as well.

LED INDICATOR DEFINITION

TROUBLESHOOTING

• I paired REKON to my PC and when Windows tried to automatically install the drivers for REKON, it comes back with multiple “Bluetooth Peripheral Device – No Driver Found” errors. Where can I find the drivers?
  This means Windows was notable to find any Bluetooth drivers for your PC hardware. Please ensure you have your computer manufacturer’s Bluetooth software suite installed and try to pair REKON again. It should automatically install all Bluetooth-related functional­ities of REKON upon pairing.

• REKON’s charging light remains red and does not turn blue.
  Ensure you’re using a charger with an output of S00mA or less. If problem persists, contact IASUS customer support.

• REKON’s volume when playing music is very low.
  During Music Mode (music playback), REKON’s volume level is adjusted independently of the phone’s Bluetooth playback volume. If you experience low volume on Music Mode, be sur-e the volume is turned up on your phone as well as on the REKON.

1-YEAR LIMITED WARRANTY

IASUS Concepts Limited warrants that the IASUS RE KON sold by IASUS Concepts or its authorized agents is free from defects in materials and workmanship under normal use for one year. This warranty is only applicable to the original purchaser in possession of a dated sales document receipt that includes the name and the company from which it was purchased. This warranty is instead of and excludes all other warranties, expressed or implied, including any implied warranty of merchantability or fitness, and of any other obligation on the part of IASUS Concepts Limited.

WHAT THIS WARRANTY DOES NOT COVER

• Damage from improper operation, misuse, or neglect such as dropping the product onto hard surfaces, contact with extreme humidity or heat, or acts of nature (lightning, floods, power surges, etc.).
• Products that may have been tested, adjusted, installed, maintained, repaired or altered in any way by persons not expressly approved by IASUS Concepts Limited.
• Cords that are stretched, burnt, torn or cut.
• Products purchased more than 12 months previous to the current date.
• Products that are not accompanied by a valid proof of purchase.

TO REGISTER FOR YOUR WARRANTY
You must register your product to receive warranty service. To do so and to view detailed information about our warranty service, please visit: <https ://iasus-concepts.com/warranty/>

TO GET WARRANTY SERVICE FROM IASUS CONCEPTS
Please contact our customer service department via our website. Once you have done so, you will receive instructions on how to ship the products to IASUS Concepts or to one of our designated service centers. If instructed to ship the product, you must ship it with freight, duties and insurance prepaid. Regardless of where you are instructed to ship your product, you must include:

• A copy of your dated sales document receipt
• A fully completed Return Materials Authorization (RMA) form.
• Payment for any services or repairs not covered by the warranty. This will have been predetermined with your customer service representative.

LEGAL INFORMATION

There is no informal dispute settlement mechanism available. This warranty gives you specific legal rights, and you may also have other rights, which vary geographically. Some areas do not allow limitations on how long an implied warranty last and/or do not allow the exclusions or limitations or consequential damages. IF this is true for your area, the above limitations or exclusions may not apply to you. IASUS Concepts shall not be liable for any special or consequential damages or for loss or expense directly or indirectly arising from use of the product, inability vi yuse the product in combination with other equipment, or from any other cause. IASUS Concepts reserves the right to make changes in the design of the product and to make additions or improvements to it without incurring any obligation to modify any products previously sold.

contact us directly at: info@iasus-concepts.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>