IASUS IA-BMT Wireless Throat Mic User Guide
- September 9, 2024
- IASUS
Table of Contents
IASUS IA-BMT Wireless Throat Mic User Guide
Thank You for choosing the IASUS BMT Wireless Throat Microphone Headset System
In this manual, you will find instructions to operate your BMT with Bluetooth
enabled devices. Should you have any questions and require assistance with
setup and usage, please feel free to visit our website: or contact us directly
at: info@iasus-concepts.com
www.iasus-concepts.com
PACKAGE CONTENTS
A ………. BMT Throat Mic Module
A1 …… Magnetic Clasp
A2 …… Throat Strap
B ………USB-C Charging Cable
SPECIFICATIONS
Bluetooth 5.2 Low Energy
** SUPPORTED PROFILES
AVRCP 1.6 : HSP 1.2
A2DP 1.3.1 : SPP 1.2
HFP 1.7 : BLE 5.0
BATTERY
PLAYBACK TIME : 9 HOURS
CALL TIME : 10 HOURS
STAND-BY TIME : ………………250 HOURS
CHARGING TIME : 90 MINUTES
CHARGING SPECS : 5 V
BATTERY CAPACITY : 150 m A h
STANDARD
** Ingress Protection Rating against dust and water
USING THE BMT THROAT MIC
I. Open the magnetic break way clasp by twisting them apart.
II. Place the throat mic around your neck and reapply the clasp so that
it makes contact. The optimal position for a throat mic is about 1-1.5” to the
side of the voice box where the BMT is positioned.
III. Adjust the neck strap for tightness by using the adjusters (A2). The
throat mic needs to be just snug but not tight around your neck.
TIP : Due to variances in neck shapes and sizes, adjusting and testing the position of the throat mic will be necessary to achieve optimal performance. Pay close attention to ensure the Gen 5.0 Transponder Microphone (A) makes good contact with your throat and level with where the larynx (voice box) is located.
NOTE: The transponders should rest comfortably on the neck and be in contact with your neck at all times. It should not be too tight. The adjustable straps have flex in order for to maintain the Stealth in position. Dot not over tighten the straps.
AUDIO OUTPUT CONNECTOR
B M T is equipped with a 3.5mm audio output connector that is optimized for
the following IASUS audio accessories :
- 3.5mm Acoustic Coil Earpiece
- X Sound 4 – High Definition Helmet Speakers
- X Sound 2.1R – Helmet Speakers
- iA Waterproof Earbuds
- Future IASUS helmet speakers and earbuds products
IASUS cannot guarantee the compatibility and sound quality of any third party helmet speakers and earbuds when used with BMH as they may not be acoustically tuned to IASUS audio standards.
BMT CHARGING
A full charge completes in about 90 minutes. The background LED on the Center
Button will be red until it is fully charged, at which point turns blue.
To extend the life of the battery, we recommend not using fast chargers (>500mA). To avoid damage to the battery, refrain from draining completely to zero and leaving it uncharged for an extended amount of time. Keep the BMH fully charged if stored for extended periods of time.
The BMT battery is sealed inside the unit and is not user serviceable. Please
contact IASUS for issues with the battery.
For proper disposal of this product at the end of its working life, consult
your local laws for proper electronics and battery recycling and disposal. If
you are not sure, do not deposit in unsorted waste but drop it of at your
local or regional collection point for recycling to prevent any possible harm
to the environment or human health.
BLUETOOTH PAIRING
TURN PAIRING MODE ON
Press and Hold Center Button for at least 3 second until background LED
flashes Red and Blue with an audible pairing tone.
PAIR DEVICE
Find “BMT” in the list of available devices in the Bluetooth menu of the
device you are pairing.
The IASUS BMT uses standard Bluetooth 5.2 protocols.
When paired with newer devices, there is no need to enter a passcode. For
older Bluetooth equipped devices, enter the code “0000”.
TRANSPARENCY MODE
TURNING TRANSPARENCY MODE ON
One of the unique features of the BMT is the Transparent Mic. With the turn on
the feature, the ambient sounds from your surroundings are mixed in with the
audio source, enabling you to be aware of what’s around you as you enjoy your
amplified audio.
VOICE COMMAND
VOICE ACTIVATED
| Utilize voice commands with your phone’s smart assistants (such as Siri or
Google Assistant) to gain full control over volume adjustments, music skipping
or backtracking, playback control (play/stop), initiating phone calls, and
more.
---|---
Say ‘Hey Siri’ on iPhones or ‘Ok Google/Hey Google’ on Android phones
*Ensure that Voice Command is activated in your device’s settings menu.
MAGNETIC BREAKAWAY CLASP
The B MT Throat Mic is equipped with a Magnetic Breakaway Clasp that speeds up
putting it on and taking it off.
As well, it allows for a quick disengagement in emergency situations.
SAFE DISENGAGING OF THE CLASP
Under normal circumstances during regular use, use both hands to disengage the
clasp by twisting them apart.
EMERGENCY SITUATIONS ONLY
In the event of an emergency where removal of the BMT is required, pulling
the neck strap apart in opposite directions will quickly disengage the clasp.
TROUBLESHOOTING
I paired BMT to my PC and when Windows tried to automatically install the
drivers for BMT, it comes back with multiple “Bluetooth Peripheral Device – No
Driver Found” errors. Where can I find the drivers?| This means Windows was
not able to find any Bluetooth drivers for your PC hardware. Please ensure you
have your computer manufacturer’s Bluetooth software suite installed and try
to pair BMT again. It should automatically install all Bluetooth related
functionalities of BMH upon pairing.
---|---
BMT’s charging light remains red and does not turn blue.| Ensure you’re using
a charger with an output of 500mA or less. If problem persists, contact IASUS
customer support.
BMT’s volume when playing music is very low.| Make sure the speakers are
positioned accurately within your helmet. If they are not directly atop and in
contact with your ears, you may experience audio loss, resulting in lower
volume and dissatisfaction with the audio quality
1-YEAR LIMITED WARRANTY
IASUS Concepts Limited warrants that the IASUS BMT sold by IASUS Concepts or its authorized agents is free from defects in materials and workmanship under normal use for one year. This warranty is only applicable to the original purchaser in possession of a dated sales document receipt that includes the name and the company from which it was purchased. This warranty is in lieu of and excludes all other warranties, expressed or implied, including any implied warranty of merchantability or fitness, and of any other obligation on the part of IASUS Concepts Limited.
WHAT THIS WARRANTY DOES NOT COVER
- Damage from improper operation, misuse, neglect such as dropping the product onto hard surfaces, contact with extreme humidity or heat, or acts of nature (lightning, floods, power surges, etc.).
- Products that may have been tested, adjusted, installed, maintained, repaired or altered in any way by persons not expressly approved by IASUS Concepts Limited.
- Cords that are stretched, burnt, torn or cut.
- Products purchased more than 12 months previous to the current date.
- Products that are not accompanied by a valid proof of purchase.
TO REGISTER FOR YOUR WARRANTY
You must register your product to receive warranty service. To do so and to
view detailed information about our warranty service, please visit :
https://iasus-concepts.com/warranty/
TO GET WARRANTY SERVICE FROM IASUS CONCEPTS
Please contact our customer service department via our website. Once you have
done so, you will receive instructions on how to ship the products to IASUS
Concepts or to one of our designated service centers. If instructed to ship
the product, you must ship it with freight, duties and insurance prepaid.
Regardless of where you are instructed to ship your product, you must include:
- A copy of your dated sales document receipt
- A fully completed Return Materials Authorization (RMA) form.
- Payment for any services or repairs not covered by the warranty. This will have been predetermined with your customer service representative.
LEGAL INFORMATION
There is no informal dispute settlement mechanism available. This warranty
gives you specific legal rights, and you may also have other rights, which
vary geographically. Some areas do not allow limitations on how long an
implied warranty last and/or do not allow the exclusions or limitations or
consequential damages. IF this is true for your area, the above limitations or
exclusions may not apply to you. IASUS Concepts shall not be liable for any
special or consequential damages or for loss or expense directly or indirectly
arising from use of the product, inability yi yuse the product in combination
with other equipment, or from any other cause. IASUS Concepts reserves the
right to make changes in the design of the product and to make additions or
improvements to it without incurring any obligation to modify any products
previously sold.
f o r l a s t e s t n e w s a n d p r o d u c t s , f o l l o w u s o n s o c
i a l m e d i a
/iasus.concepts
/iasusconcept
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>