Genius SW-2.1 1850 BT 50 Watts Subwoofer Speaker System User Guide

Genius SW-2.1 1850 BT 50 Watts Subwoofer Speaker System

Product Specifications

• Model : SW-2.1 1850BT
• Speaker System : 2.1 Subwoofer
• Power Output: 50 Watts
• Frequency : 2.402GHz-2.48GHz
• Max. Transmit Power : 10 dBm

Product Usage Instructions

Safety Instructions:

1. Do not install the equipment in a confined space without proper ventilation.
2. Avoid exposing the apparatus to rain or moisture to prevent the risk of fire or electric shock.
3. Ensure the mains plug is readily operable for disconnecting the device.
4. Dispose of the product responsibly to prevent harm to the environment.
5. The operating temperature should not exceed 40 degrees Celsius.

Setup and Installation:

1. Place the speakers next to the monitor, one on either side.
2. Connect the AC power cord to a suitable outlet.
3. Plug the satellite speaker cables into the host speaker OUTPUT RCA jacks.
4. Insert the 3.5mm audio cable into the soundcard or other compatible device.

Control Functions:

• Power Button: Turn on or turn off
• Source Button: Switch between Bluetooth, Optical, and Aux modes
• Volume Controls: Adjust volume levels
• Playback Controls: Play/pause, skip tracks
• EQ Mode: Adjust equalizer settings

Wireless Setup:
To pair via Bluetooth:

1. Ensure Bluetooth is enabled on your device.
2. Press and hold the Bluetooth Pairing button until the indicator light flashes.

Safety Instruction for CB and CE-LVD

1. Do not install this equipment in a confined or building-in space such as a bookcase or similar unit, and maintain a good ventilation condition. The ventilation should not be impeded by covering the ventilation openings with items such as newspaper, tablecloths, curtains etc.
2. WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. The apparatus shall not be exposed to dripping or splashing and that objects filled with liquids, such as vases, shall not be placed on the apparatus.
3. WARNING : The mains plug is used as a disconnect device, the disconnect device shall remain readily operable.
4. Correct Disposal of this product. This marking indicates that this product should not be disposed of with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmentally safe recycling.
5. Frequency : 2.402GHz-2.48GHz
6. The Max. transmit power: is 10 dBm

• Risk Of explosion if the battery is replaced by an incorrect type.
• The equipment shall be used at a maximum of 40 degrees C ambient temperature.

USER MANUAL INSERTS FOR FCC ID

Warning : Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in
a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

RF exposure statement:
The transmitter must not be co-located or operated in conjunction with any other antenna or transmitter. This equipment complies with the FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a Minimum distance of 20cm between the radiator and any part of your body.

POWER ON

CONNECTION

Control Function

Wireless Setup 1/2

• Bluetooth pairing to a phone or entertainment device:
• Turn on your phone and ensure its Bluetooth function is activated.
• Turn on speaker power and switch the “SOURCE” button to Bluetooth mode and go to pairing mode.(Remark: While the speaker power on for the first time, it’s in Bluetooth mode.)
• Search for Bluetooth devices on your phone by following the phone’s instructions. Refer to your phone’s user manual for more information.
• After a few seconds, the phone will list the device as a “SW-2.1 1850BT”, select it and follow your phone instruction to select this pairing.
• Your phone will confirm the pairing, and then press Yes/Ok.
• Finally, select “connect with device” from your phone.

REMOTE CONTROL

ErP Mode (ECO Mode)

Connecting the SW-2.1 1850BT Speakers

1. Place the speakers next to the monitor, one on either side.
2. Connect the AC power cord (A) to a suitable AC outlet.
3. Plug the satellite speaker cables (B) into the host speaker “OUTPUT” RCA jacks.
4. Insert the 3.5mm plug of the audio cable (C) into the sound card or other audio source. Or insert the optical cable plug (D) into your device which has optical signal output.(the optical cable is not included in package)

Control Function

1. Power : Turn on/off the system power.
2. Source : Switch to Bluetooth/Optical/Aux in mode.
3. VOL +: Increase the volume.
4. VOL -: Decrease the volume.

Specification

Power source: 100-240V~50/60Hz, 50W

Warning

1. Do not connect the power plug into an AC outlet until all connections are made.
2. Remove AC power cord if you do not use this device for a long time.
3. Do not expose the speakers to any dripping or splashing and make sure no object filled with liquids, such as vases, etc., are placed on them.

The symbol for Separate Collections in European Countries
This symbol indicates that this product is to be collected separately.

The following applies only to users in European countries:

• This product is designated for separate collection at an appropriate collection point. Do not dispose of as household waste.
• For more information, contact the retailer or the local authorities in charge of waste management.

FAQ

• Q: What is the recommended distance between the speakers and the receiver?
  A: It is recommended to keep a distance of at least 6 feet between the speakers and the receiver for optimal performance.

• Q: How do I reset the device to factory settings?
  A: To reset the device, press and hold the Power button for 10 seconds until the indicator lights flash rapidly, indicating a reset.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>