nordlux 2415000101 LED Surface Mount Light Instruction Manual

June 16, 2024
nordlux

nordlux 2415000101 LED Surface Mount Light

Product Specifications

  • Double-insulated conductor
  • Single-layer insulated wire
  • Conductor Length Min: 50mm, Max: 55mm
  • Wire Size: 0.75-1.5 mm2
  • Max. Number of Inter-connected Pieces: 15pcs

Product Usage Instructions

Safety Precautions

Before starting the installation, always ensure to disconnect the power supply. In some countries, electrical installations should only be carried out by a qualified electrician. Contact local authorities for advice.

Light Source Replacement

The light source of this fixture is not replaceable. When the light source reaches the end of its lifespan, the entire fixture must be replaced.

Reset Function

To reset the settings, follow these steps:

  1. Turn all lights on
  2. Set brightness to 50%
  3. Choose center focus
  4. Repeat the last setting with a long press
  5. To turn all lights off, press the corresponding button

IP Rating

This product has an IP20 rating, suitable for indoor use only.

Language Specific Instructions

Refer to the manual in your language for specific instructions and safety information.

FAQ

  • Q : Can the light source be replaced?
  • A: No, the light source of this fixture is not replaceable. When it reaches the end of its lifespan, the entire fixture must be replaced.
  • Q: How many inter-connected pieces are supported?
  • A : The maximum number of inter-connected pieces supported is 15pcs.

power

nordlux-2415000101-LED-Surface-Mount-Light-fig-1

INSTALLATION INSTRUCTION

nordlux-2415000101-LED-Surface-Mount-Light-fig-2nordlux-2415000101-LED-Surface-Mount-Light-
fig-3

nordlux-2415000101-LED-Surface-Mount-Light-fig-4

3-STEP MOODMAKER™ FUNCTION·WORKS WITH A NORMAL WALL SWITCH

nordlux-2415000101-LED-Surface-Mount-Light-fig-5

Reset function

nordlux-2415000101-LED-Surface-Mount-Light-fig-6

SYMBOLS

  • IP20: The lamp should only be installed in areas where direct contact with water cannot occur.
  • Class II: The lamp is double-insulated and does not need to be connected to the yellow/green earth wire.
  • The lamp is only suitable for connecting directly to the mains.
  •  The mounting instruction must not be discarded.
  • IMPORTANT! Always shut off power to the circuit before starting installation work. In some countries electrical installation work
  • Disposal of waste equipment by users in private households in the European Union. This symbol indicates that this product must not be disposed of with your other household waste. Electrical and electronic equipment contain substances that may cause damage to human health and the environment if not recycled correctly. It is your responsibility to hand over to a designated collection point for recycling of waste electrical and electronic equipment. When handing over for correct recycling you help to prevent these products straining nature and the environment unnecessarily and to protect human health. For more information regarding correct disposal, please contact your local city office, your household waste disposal service or the store where you purchased this product
  • For indoor use only

CONTACT

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals