EATON B127E-1A1-HH 4K HDMI Over Cat6 Extender Kit User Guide

: June 15, 2024
: EATON

Table of Contents

EATON B127E-1A1-HH 4K HDMI Over Cat6 Extender Kit
Product Information
Installation
Warranty
Contact
Read User Manual Online (PDF format)
Download This Manual (PDF format)

EATON B127E-1A1-HH 4K HDMI Over Cat6 Extender Kit

Product Information

Specifications

Model: B127E-1A1-HH
Max Distance: Up to 328 ft. (100 m) at 4K/60 Hz
Includes: RS-232 Male to Male Cable, Micro USB Cable

Purchased product may differ from image.

Frequently Asked Questions

Q: Can monitors with different resolutions be connected?
- A: Yes, monitors with varying resolutions such as 4K 30Hz or 1080p can be connected without affecting the 4K 60Hz signal transmission.

Installation

B127E-1A1-HH Extender Kit

Up to 328 ft. (100 m) Cat6 cable at 4K/60 Hz
Up to 15 ft. (4.5 m) HDMI 2.0 cable at 4K/60 Hz
RS-232 Male to Male Cable
Micro USB Cable

TRANSMITTER AND RECEIVER CONNECTION

Notes

Test to ensure the entire installation works properly before pulling cables through ceilings/walls.
To achieve maximum distance and performance, use 24 AWG solid-wire Cat6 cable. Using stranded-wire Cat6 cable, or cable with a gauge (AWG) size higher than 24 AWG, will result in shorter extension distance. Higher gauge cabling, such as 26 AWG, has a more limited transmission capability than lower gauge cabling. All N202-Series Cat6 cables are made with 24 AWG solid-wire cabling.
The installation diagram shows a B127E-1A1-HH unit.
External power is not required for remote receiver units due to Power-over-Cable (PoC) technology incorporated in the transmitter units.

Make sure all equipment in the installation is powered OFF.
Using an HDMI 2.0 cable (such as P569-XXX-CERT or P568-XXX-2A Series cables), connect the HDMI source to the INPUT port on the local transmitter.
(Optional) Using an HDMI 2.0 cable (such as P569-XXX-CERT or P568-XXX-2A Series cables), connect a local monitor to the LOCAL port on the B127E-1A1-HH local transmitter. Monitors with varying resolutions such as 4K 30Hz or 1080p can be connected without affecting the 4K 60Hz signal transmission.
Using Cat6 cable up to 328 ft. (100 m), connect the RJ45 port on the local transmitter to the RJ45 port on the remote receiver.
Using an HDMI 2.0 cable (such as P569-XXX-CERT or P568-XXX-2A Series cables), connect the remote receiver’s HDMI port to a monitor.
Turn the power ON to your connected displays. The LOCAL (orange) LED will illuminate to indicate the local port has been connected to a display.
Connect the external power supply to the local transmitter, and plug it into an available wall outlet, Surge Protector, Power Distribution Unit (PDU) or Uninterruptible Power Supply (UPS). The POWER (green) LED on the local transmitter will illuminate to indicate the unit is receiving power from the external power supply. The POWER (green) LED on the remote receiver will illuminate to indicate the unit is receiving power from the local transmitter through PoC technology.
Turn ON the power to the HDMI source. The TX (orange) LED on the local transmitter illuminates to indicate a signal is being received from the source. The RX (orange) LED on the receiver illuminates to indicate a signal is being received from the source to the display.

Warranty

1-YEAR LIMITED WARRANTY

We warrant our products to be free from defects in materials and workmanship for a period of one (1) year from the date of initial purchase. Our obligation under this warranty is limited to repairing or replacing (at its sole option) any such defective products. Visit Tripplite.Eaton.com/support/product- returns before sending any equipment back for repair. This warranty does not apply to equipment which has been damaged by accident, negligence or misapplication or has been altered or modified in any way.

EXCEPT AS PROVIDED HEREIN, WE MAKE NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Some states do not permit limitation or exclusion of implied warranties; therefore, the aforesaid limitation(s) or exclusion(s) may not apply to the purchaser.

EXCEPT AS PROVIDED ABOVE, IN NO EVENT WILL WE BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OF THIS PRODUCT, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Specifically, we are not liable for any costs, such as lost profits or revenue, loss of equipment, loss of use of equipment, loss of software, loss of data, costs of substitutes, claims by third parties, or otherwise.

Eaton has a policy of continuous improvement. Specifications are subject to change without notice.