iHome iBTW22 Wireless Charging plus Speaker User Manual
- June 3, 2024
- iHome
Table of Contents
iHome iBTW22 Wireless Charging plus Speaker
PRODUCT DESCRIPTION
-
POWER
Press to turn ON/OFF -
SET
Press to decrease settings -
SET
Press to increase settings -
SNOOZE/DIMMER
- Press to snooze an alarmn
- Press to adjust display brightness
-
AUTO DIMMING SENSOR
-
SPEAKERPHONE
- Press to answer a call
- Press& hold to end/reject a call
- When connected to a BT device, press to make voice commands
-
PLAY/PAUSE
Press to play/pause audio -
ALARM
- Press to Preview
- Press Again to Arm/Disarm
- Press& Hold to Set Alarm (adjust with +/- and press alarm to confirm)
REAR PANEL
BLUETOOTH PAIRING
- Press & hold to enter Bluetooth pairing mode
- Select ‘iHome TimeBase’ on your device to connect
- To cancel pairing, press Bluetooth button again
TIME SET
- Press & Hold to Set Time
- Release Time Set Button when display is flashing
- Adjust time using +/-and press Time Set to confirm
- Repeat Step 3 to set year, month, and date
BOTTOM PANEL
BACKUP BATTERY COMPARTMENT
for clock accuracy and alarm setting backup
When Low Backup Battery icon appears on the display, install a new CR2450
battery
DST SWITCH
By default, the DST Switch is set to Auto and will automatically adjust the
time in March/November
DISPLAY ICON
WIRELESS CHARGING
Supports:
- Qi compatible phones (also works with plastic cases up to 3mm thick”)
- Apple Air Pods
Place Qi compatible device facing upward on the charging rest. Charging status will be indicated on the LED lOcated under the iHome badge:
-
Rapid blinking icon: Device is not charging (reposition device)
-
Slow blinking icon: Device is charging
-
Solid icon: Device is fully charged
Note: Qi status LED may continue to blink slowly (indicating charging) for iOS devices that are fully charged. -
CAUTION: Not all cases are wireless charging compatible. Remove phone’s metal protective case before charging. Do not place magnetic or metal objects on charger during charging.
*Some larger size phone cases may not be able to charge. Please remove case to charge phone properly.)
WARNING
- Do not ingest the battery, Chemical Burn Hazard. his product contains a coin/button cell battery. If the coin/button cell battery is swallowed, it can cause severe internal burns in Just 2 hours and can lead to death
- Keep new and used batteries away trom children. the battery compartment does not close securely. stop using the product and keep it away from children.If you think batteries might have been Swallowed or placed inside any part of the body, seek immediate medical attention
- The mains plug of power adapter is used as the disconnect device, it shall remain readily operable
- CAUTION-RISK OF Explosion IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
- The socket-outlet shall be installed near the equipment and shall be easily accessible.
IMPORTANT SAFETY INSTRUCTIONS
lease heed all warnings, read and follow all instructions and keep these instructions handy for future reference.
- Do not use this product near water.
- Unplug unit and clean only with damp cloth. stronger cleaning agents, such as Benzene, thinner or similar materials can damage the surface of the unit.
- Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
- Heat- This product should be situated away from heat sources such as radiators, heat registers, stoves or other appliances including amplifiers) that produce heat.
- Only use attachments/accessories specified by the manufacturer.
- Unplug this product during lightning storms or when unused for long periods of time
- Damage ReqUiring service – Ihis product should be serviced by qualified service personnel when:
- Plug has been ddidgea
- Objects have fallen into or liquid has been spilled into the enclosure.
- The unit has been exposed to rain. I he unit has been dropped or the enclosure damaged.
- The unit exnibits a marked change in performance or does not operate normally
- No naked flame sources, such as lighted candles, should be placed on this product.
- Attention should be drawn to the environmental aspects of battery disposal. Many electronics retailers now recycle batteries and other electronic components at no charge. To find a drop-off location near you, visit www.call2recycle.com
- This product is suitable for use in tropical and/or moderate climates.
WARNING:
- To reduce the risk of fire or electriC shock, do not expose thiS product to rain or moisture.
- Do not dispose of batteries in the household trash or ire.
FCC Information
- This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment.
- This device complies with Part i5 of the FCC Rules, operation is subject to the following two conditions:
- This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
- Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. .
- NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules
- These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio Treguency energy and, ir not installed and used in accordance witn the instructions, may cause harmful interference to radio communications.
- However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
ISED Information
This equipment complies with IC RSS-102 radiation exposure limits set forth
for an uncontrolled environment.
This device contains licence-exempt transmitter(s)/receiver(s) that comply
with Innovation, SCience and Economic Development Canada’s licence-exempt
RSS(S). Operation is subject to the following two conditions:
- Rhis device may not cause interference
- This device must accept any interference, including interference that may cause undesired operation of the device.
- The device comply with ISED RE exposure requirement, users can obtain Canadian information on R exposure and compliance.
- This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body.
- Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
For questions,
warranty, and additional safety information, please scan the GR code or visit:
www.ihome.com/help/ibtw22
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>