iHome IBT920A Color Changing Splashproof Boombox User Guide
- May 15, 2024
- iHome
Table of Contents
- iHome IBT920A Color Changing Splashproof Boombox
- Product Information
- Product Usage Instructions
- TOP PANEL
- BLUETOOTH CONNECTION OPERATION
- REMOTE SCHEMATIC DIAGRAM AND OPERATION INSTRUCTIONS
- IMPORTANT SAFETY INSTRUCTIONS
- ONE-YEAR LIMITED WARRANTY
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
iHome IBT920A Color Changing Splashproof Boombox
Product Information
Specifications:
- Model: iBT920
- Size: 306 x 150 mm (unfolded), 102 x 150 mm (folded)
- Total Pages: 6
- Color : Color Changing
- Splashproof Boombox
Product Usage Instructions
Top Panel Functions:
- Mode Button
- Volume Button
- Battery Indicator
- BT Indicator
- Light Button
- Sound Effects Button
- Power On/Off Button
- Play/Pause Button
Volume Control:
Short press the volume +/- buttons to adjust volume. Long press to skip tracks
in music mode or change radio stations in FM mode.
Light Control:
Short press to toggle light on/off. Long press to turn off the light.
Mode Button:
Short press to switch between Bluetooth, FM, AUX, U disk, and TF card modes.
Long press for True Wireless Stereo (TWS) function.
Power On/Off:
Long press the Power button for 2 seconds to turn the speaker on or off.
Play/Pause Button:
Short press to play/pause music. In FM mode, long press to search for
channels.
Back Panel Functions:
- AUX Audio Input
- TF Card Slot (Max capacity: 64GB)
- U Disk Slot (Max capacity: 64GB)
- Wired Microphone Input
- Charging Port
- Charging Indicator
FAQ:
How do I charge the speaker?
Use the included USB-C charging cable and connect it to a USB AC adaptor.
Charge the unit for about 5 hours until the LED indicator shows a green light
for fully charged status.
How can I pair the speaker via Bluetooth?
To pair, turn on the unit in BT mode and ensure your device’s Bluetooth is on.
Press and hold the Play button to enter pairing mode. Select ‘iHome iBT920’ on
your device to pair.
TOP PANEL
Volume Button
- Short press volume – button to decrease volume. When playing music, long press to play the previous song. When in FM mode, long press to select the previous radio station.
- Short press volume + button to increase volume. When playing music, long press to play the next song. When in FM mode, long press to select the next radio station.
Light Button
- Short press to turn on the light, long press to turn off the light.
Mode Button
-
Short press to switch mode: Bluetooth, FM, AUX , U disk, TF card . Long press for TWS function.
Power On/Off -
Long press for 2 seconds to power on/off.
Play/Pause Button
- Short press to play/pause. When in FM mode, long press to automatically search for channels.
BACK PANEL
CHARGING THE SPEAKER
LED STATUS INDICATORS:
Battery charging status
Charging indicator located at the rear of unit
BLUETOOTH
Bluetooth indicator located on the top of unit
WATER RESISTANT CAP
Before using near water, make sure the water resistant cap is completely
covered.
LOW BATTERY STATUS
Low Battery Prompt: Low Battery
BLUETOOTH CONNECTION OPERATION
Turn on unit to BT mode, make sure your device switch on Bluetooth.
- Press & hold the Play button to enter pairing mode.
- Select ‘iHome iBT920’ on your device to pair.
RECORDING OPERATION
- Insert TF card or U disk, switch to Bluetooth mode.
- Play BT music.
- Insert in a wired microphone.
- Short press the record button (on the remote control) to start recording. To finish recording, short press the record button.
- To play a recorded file, long press the Play button.
- To delete the recorded file, playing the recorded file and long press the Play button to delete the file.
TRUE WIRELESS PAIRING (TWS)
(REQUIRES 2 SPEAKERS)
- Pair one iBT920 unit to your device via Bluetooth.
- Power on the second iBT920 unit.
- Press and hold the Mode button for 2 seconds on each unit.
- When both units are linked, will announce “Left Channel”, “Right Channel” respectively.
- Both units will link TWS automatically next time when both units are powered on.
- If want to remove TrueWireless, reset BT pairing: press & hold Play button for 10 seconds on both units.
REMOTE SCHEMATIC DIAGRAM AND OPERATION INSTRUCTIONS
-
Under normal circumstances, the remote control should be used within the receiving range of about 6 meters and 30 degrees from the device receiving window.
-
When operating the remote, please aim it at the receiving window of the device.
There should be no obstacles between the remote and the device. -
If the receiving window of the device is placed under a strong light, the operation panel of the remote may malfunction. In this case, please move the device away to avoid direct exposure.
-
When the remote no battery, you can replace “AAA” x 2 batteries to avoid mixing old and new batteries. Please check the remote batteries regularly to see if they need to be replaced.
IMPORTANT SAFETY INSTRUCTIONS
Please heed all warnings, read and follow all instructions and keep these instructions handy for future reference.
- Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
- Heat – This product should be situated away from heat sources such as radiators, heat registers, stoves or other appliances (including amplifiers) that produce heat.
- Only use attachments/accessories specified by the manufacturer.
- Unplug this product during lightning storms or when unused for long periods of time.
- Damage Requiring Service – This product should be serviced by qualified service personnel when:
- Plug has been damaged.
- Objects have fallen into or liquid has been spilled into the enclosure.
- The unit has been exposed to rain. The unit has been dropped or the enclosure damaged.
- The unit exhibits a marked change in performance or does not operate normally.
- No naked flame sources, such as lighted candles, should be placed on this product.
- Attention should be drawn to the environmental aspects of battery disposal.
- This product is suitable for use in tropical and/or moderate climates.
- Do not dispose of batteries in the household trash or fire.
- The mains plug of power adaptor is used as the disconnect device, it shall remain readily operable.
- Unplug unit and clean only with damp cloth. Stronger cleaning agents, such as Benzene, thinner or similar materials can damage the surface of the unit.
- CAUTION! Risk of explosion if the battery is replaced by an incorrect type.
- If the unit is to be unused for an extended period of time, such as a month or longer,charge the unit fully before storage. Always use a UL/ETL-certified charging adapter (not included), and the supplied USB charging cable.
FCC INFORMATION
This equipment complies with FCC RF radiation exposure limits set forth for an
uncontrolled environment.
This device complies with Part 15 of the FCC Rules, operation is subject to
the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
ISED Information
The device comply with ISED RF exposure requirements, users can obtain
Canadian information on RF exposure and compliance.
This equipment complies with IC RSS-102 radiation exposure limits set forth
for an uncontrolled environment.
This device contains licence-exempt transmitter(s)/receiver(s) that comply
with Innovation,Science and Economic Development Canada’s licence-exempt
RSS(s). Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
ONE-YEAR LIMITED WARRANTY
iHome Products, a division of SDI Technologies Inc. (hereafter referred to as
SDI), warrants this product to be free from defects in workmanship and
materials, under normal use and conditions, for a period of 90 days from the
date of original purchase. Should this product fail to function in a
satisfactory manner, it is best to first return it to the store where it was
originally purchased. Should this fail to resolve the matter and service still
be required by reason of any defect or malfunction during the warranty period,
SDI will repair or, at its discretion, replace this product without charge.
This decision is subject to verification of the defect or malfunction upon
delivery of this product to the Factory Service Center authorized by Customer
Service.
If service is required, please contact Customer Service at
ihomeaudio.com/support/contact to obtain a Return Authorization Number and
shipping instructions. A copy of the sales receipt is required to validate in-
warranty coverage. If proof of purchase cannot be produced, the product will
be deemed out-of-warranty. The date of purchase, vendor,product model number,
and purchase price must be legible and verifiable.
Disclaimer of Warranty
NOTE: This warranty is valid only if the product is used for the purpose for which it was designed. It does not cover (i) products which have been damaged by negligence or will ful actions, misuse or accident, or which have been modified or repaired by unauthorized persons; (ii) cracked or broken cabinets, or units damaged by excessive heat; (iii) damage to digital media players, CD’s or tape cassettes (if applicable); (iv) the cost of shipping this product to the Factory Service Center and its return to the owner. This warranty is valid only in the United States of America and does not extend to owners of the product other than to the original purchaser. In no event will SDI or any of its affiliates, contractors, resellers, their officers, directors, shareholders, members or agents be liable to you or any third party for any consequential or incidental damages, any lost profits, actual, exemplary or punitive damages.
(Some states do not allow limitations on implied warranties or exclusion of
consequential damages, so these restrictions may not apply to you.) This
warranty gives you specific legal rights, and you may also have other rights
which vary from state to state. Your acknowledgment and agreement to fully and
completely abide by the above-mentioned disclaimer of warranty is
contractually binding to you upon your transfer of currency (money
order,cashier’s check, or credit card) for purchase of your SDI product.
© 2023 SDI Technologies, Inc. All rights reserved.
Questions? Visit www.ihome.com