iHome TX-30 Wireless Headphone User Manual

TX-30 Wireless Headphone
User Manual

Product Parameters:

Bluetooth Version: 5.1
Support Profile: a2dp\avctp\avdtp\avrcp\hfp\spp\smp\att\gap\gatt\rfcomm\sdp\l2cap
Working Distance Range: 10m
Frequency Range: 20Hz-20KHz
Battery Specifications: 3.7V, 300mAh, Built-in rechargeable lithium-ion battery
Charging Time: about 2 hours
Talking/Music time: 10-16 hours
Standby Time: about 100 hours

Items Included:

1. One Bluetooth headset “iHome TX-30 ”
2. One USB to Micro-USB charging cable
3. One Aux-in cable
4. One User’s Manual

Button Description:

“ ”: Long press ON/ OFF
“ ”: Short press Play/Pause/Answer Call/Hang up Call, double press back to dial the Call
“ ”: short press for Next song / long press increase volume
“ ”: short press for previous song / long press reduce volume

Function Description:

1. Startup:
   Long press “ ” for more than 3 seconds, the headset will start up and enter Bluetooth mode automatically, voice prompts
   “Power on “, LED indicator light turns to blue.

2. Shutdown:
   Long press“ ” for more than 5 seconds, voice prompts “Power OFF”, LED indicator light turns off.

3. Bluetooth Mode:
   1) Pairing Operation:
   a. For the first time pairing: boot into Bluetooth mode automatically, voice prompts “Power on”, LED indicator light turns tubule. It will enter pairing mode automatically. LED indicator light rapidly alternating flashes with red and blue colors. Pleas open the smart device’s Bluetooth searching function and select the device “iHome TX-30 “, no password required, after successful pairing, voice prompts “bluetooth connected”, LED indicator light turns to blue again.
   b. Re-pairing: turn off the attached smart device’s Bluetooth function, voice prompts “Bluetooth disconnected”, LED indicator light rapidly alternating flashes with red and blue. Open another smart device’s Bluetooth searching function and select the device “iHome TX-30 “, no password required, after successful pairing, voice prompts “Bluetooth connected”, LED indicator light turns to blue again.
   c. Follow-up pairing: automatically pair the last connected device in 3 seconds after boot.
   2) Answer Calls:
   Short press “ ” when calls’ coming.
   3) Hang off phone calls:
   Short press “ ” after calling.
   4) Reject phone calls:
   Long press “ ” for 1 second when calls’ coming.
   5) Redial the last outgoing number:
   Double-click “ ”.
   6) Music Play:
   Short press “ ” after connected with the smart device.

4. Aux-in Mode:
   When the headset is on, insert the Aux-in cable. The Bluetooth function will turn off and switch to Aux-in playing.

5. Maximum volume warning voice prompts “low battery “.

6. Power Saving Function: insert Aux-in cable will cut off the power supply to save power.

7. Common charging port: Micro USB.

LED indicator light Status:

Charge Status| LED indicator light stays red. When fully charged, LED indicator light stays blue
---|---
Power on Status| LED indicator light stays blue
Power off Status| LED indicator light turns off
Pairing Status| LED indicator light rapidly alternating flashes with red and blue
Standby Status| LED indicator light stays blue
Connected Status| LED indicator light  flashes with blue each 5 seconds

Note:

• If no pairing connection after the Bluetooth headset enters the pairing mode, please turn off the headset to save power.
• Do not perform other operations when searching Bluetooth to prevent the program error.
• Please select a proper volume while using to prevent damage to your ears.
• Please note that a good environment for using the Bluetooth headsets can avoid damage to the headsets.
• Please charge the headset after a long time none-use.

FCC STATEMENT :

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

RF warning statement:
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>