GLOBAL INDUSTRIAL 670812 Heavy Duty Floor Curb User Manual
- June 14, 2024
- GLOBAL INDUSTRIAL
Table of Contents
GLOBAL INDUSTRIAL 670812 Heavy Duty Floor Curb
Product Information
- Specifications:
- Model Numbers: 670812, 670813, 670814, 670815, 670816, 670817
- Material: Steel
- Thickness Options: 5/16” or 3/8”
- Length: 48” for straight models, 45 degrees or 90 degrees for angled models
Product Usage Instructions
- Installation:
- Verify the safety curb is positioned in the desired location. Mark the floor where holes will be drilled.
- Using a 3/4 diameter masonry drill bit, drill a hole approximately 5 deep into the floor.
- Clean out debris and dust from inside the hole. Fully insert 3/4 hex nut sleeve anchor bolt (sold separately) through the safety curb mounting hole and into the hole in the floor.
- Slightly tap down the anchor bolt with a hammer if needed. Slide washer onto anchor bolt. Tighten the hex nut until the anchor bolt is secure.
- Repeat for remaining anchors.
FAQs
- Q: Do I need to purchase anchor bolts separately?
- A: Yes, anchor bolts need to be purchased separately for installation.
- Q: Can the safety curb be used outdoors?
- A: The safety curb is designed for indoor use only.
Models
- 670812 670813，
- 670814，670815，
- 670816，670817
Steel Safety Floor Curb
- 670812: 5/16” Thick, 48” Length
- 670813: 3/8” Thick,48” Length
- 670814: 5/16” Thick, 45 Degrees
- 670815: 3/8” Thick, 45 Degrees
- 670816: 5/16” Thick, 90 Degrees
- 670817: 3/8” Thick, 90 Degrees
INSTALLATION
- Verify the safety curb is positioned in the desired location. Mark the floor where holes will be drilled.
- Using a 3/4″ diameter masonry drill bit, drill a hole approximately 5″ deep into the floor.
- Clean out debris and dust from inside the hole. Fully insert a 3/4″ hex nut sleeve anchor bolt (sold separately) through the safety curb mounting hole and into the hole in the floor.
- Slightly tap down the anchor bolt with a hammer if needed. Slide washer onto anchor bolt. Tighten the hex nut until the anchor bolt is secure.
- Repeat for remaining anchors.
Customer Service
- US: 1-800-645-2986
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>