DIY HU-061 Weather Forecast Clock Production Kit Instruction Manual
- June 13, 2024
- DIY
Table of Contents
DIY HU-061 Weather Forecast Clock Production Kit
Product Information
Specifications:
- Product Name: HU-061 Weather Forecast Clock Production Kit
- Components: See BOM list for detailed components
Product Usage Instructions
Installation Steps:
- Weld the AMS1117-3.3 voltage regulator chip.
- Weld the single row 4P2.54mm female base.
- Solder the USB port to the motherboard.
- Solder the horizontal side buttons.
- Solder the electrolytic capacitors (long pin is positive, short pin is negative).
- Weld the double row 4P2.54mm female base.
- Solder the OLED screen 4P row pin.
- Plug in the OLED screen.
- Plug in the 8266WiFi module.
- Fix the four corners of the PCB with copper posts and M2 4mm nuts.
- Attach the PCB to the acrylic bottom shell with M2 screws (pay attention to the direction).
- Fix the front acrylic shell with M2 5mm screws and copper columns, then secure it with M2 22mm screws.
Frequently Asked Questions
Q: How can I obtain a detailed installation tutorial?
A: You can obtain a detailed installation tutorial by scanning the QR code provided in the manual using your mobile phone.
About customer service
Detailed installation tutorial can be obtained by scanning QR code on mobile Phone.
BOM
NO| Name| L a b l e| **N u m
b e r| N o t e**
---|---|---|---|---
1
| ****
DIP E-capacior 10uF
| ****
C1,C2
| ****
2
| Pin: long positive
short negative
2| 0.96 inch OLED display module| JP1| 1| ****
Place the device in the direction of the graph
3| Horizontal button| KEY1| 1
4| WIFI module| P1| 1
5| USB interface| P2| 1
6
| AMS1117-3.3V
voltage regulator chip
| ****
U1
| ****
1
7| Bent foot single row 4P socket| JP1| 1
8| Double row 4P socket| P1| 1
9| USB power cable| | 1|
10| Shell| | 1|
11| Screw bag| | 1|
12| PCB| | 1|
13| Manual| | 1|
Schematic&Component map
For detailed welding & shell assembly steps, please scan the QR code to view the graphic tutorials.
- Weld the AMS1117-3.3 voltage regulator chip.
- Welded single row 4P2.54mm female base.
- Solder patch USB port motherboard
- elded horizontal side buttons.
- Solder in-line electrolytic capacitors (pin length is positive and short is negative).
- Weld double row 4P2.54mm female base.
- Solder OLED screen 4P row pin.
- Plug in the OLED screen.
- Plug in the 8266WiFi module.
- Fix the four corners of the PCB with copper posts and M2 4mm nuts.
- Attach the PCB to the acrylic bottom shell with M2 screws ( Pay attention to the direction, the front is wider and the back is narrower )
- Fix the front acrylic shell with M2 5mm screws and copper columns, assemble the acrylic and secure it with M2 22mm screws.
Instructions for use
Weather Clock connected to the power supply, in the cell phone search for WF signal, find WIFI name for HXFB-Weather Clock and click to connect (note that after the connection will prompt the Internet is not available, because this is the clock to create their own hotspot)
Second, open the cell phone browser, in the address bar, enter 192.168.4.1 or directly click on the WF name HXFB-Weather Clock to enter the configuration interface
After completing the three steps of WIFI connection, entering weather KEY and city ID, the clock will be displayed normally
Get Weather KE¥ Tutorial
Register for a Weather account
Register at https://id.gweather.com/#/register
Before registering, you need to switch back to your own WIFI or traffic data,
because you are now connected to the HXFB-Weather Clock hotspot is not
available to the Internet, it is recommended that the registration operation
on the computer!
- Register for an account and log in
- Click the Development Service Console
- Click Management–Setup Items
- create a successful click back to the project
- Click to view, you can view the weather KEY
- After the completion of this string of characters is to use the weather secret key KEY
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>