wahoo KICKR STEER Steering System User Guide
- October 30, 2023
- wahoo
Table of Contents
wahoo KICKR STEER Steering System
IN THE BOX
ASSEMBLY
Install the ELEMNT-style mount on our bars
- Remove any existing device mounts. The supplied aluminum ELEMNT-style mount is required for strength.
- Center the mount in line with the center of the stem and tighten the bolt.
Note: If using a Garmin mount you will need to replace the puck by removing the allen bolts holding the ELEMNT-style puck and then installing the Garmin-style puck.
Install the steering paddles
- Locate the left (L) and right (R) paddles. There are L and R indicators on the paddles to help you identify the correct side for mounting.
- Slide the left paddle onto the left side (facing accessory) all the way in.
- Repeat with right paddle.
- Tighten bolts.
Install the steering accessory onto the ELEMNT-style mount
- Locate the mounting bracket slot on the accessory and slide the accessory on from the front of the bike.
- You will feel and/or hear a “click!” when the accessory is correctly locked in.
Adjust the steering paddles
- With the accessory mounted, loosen the mounting bolt to position the paddles where you feel most comfortable.
- Make note of the markers on the silver area to help with matching the left and right paddle positions.
- Tighten the mount bolt and you are done!
- The KICK STEER accessory is capable of holding mobile devices that weigh up to 3.3 lbs / 1.5kg. Excess weight may cause it to detach, risking injury and/or product damage.
- The KICK STEER accessory is designed for mobile devices with a maximum size of 3.6″ × 6.7″ / 9cm × 17cm. Using a device bigger than these dimensions may result in property damage.
- KICK STEER must be used as intended, and mounted both correctly and securely. Failure to follow these instructions may risk injury and/ or product damage.
GET RIDING NOW WITH ONE MEMBERSHIP. TOTAL ACCESS. wahoofitness.com.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>