ATOMSTACK M100 Laser Module Instruction Manual

ATOMSTACK M100 Laser Module

Specifications

• Model : AtomStack M100 Laser Module
• Power Requirement: DC 24V
• Power Output: 10W, 20W, 30W (various models)
• Accessories: Laser module, Combination slide rail, Power adapter board, Power Adapter, Power cable, Air pump, Trachea, M56 screws, M58 screws, M3 Allen key, One-to-two Laser adapter, Connecting line cable

Product Usage Instructions

Part 1: Security Statement and Warning
Methods to prevent human access to radiation when persons are inside the protective housing can include pressure-sensitive floor mats, infrared detectors, etc.

Part 2: Disclaimer and Warning

Part 3: Accessories List
Ensure all accessories are present before starting the installation process.

Part 4: Function Description of Adapter Board
Details the various ports and switches on the adapter board and their functions.

Part 5: Installation of Combination Slide Rail

1. Remove the original laser fixing.
2. Find and install the combination slide rail using provided screws.
3. Mount the laser onto the combination slide rail.
4. Install the air pipe for proper ventilation.

Part 6: Installation of Slider

1. Remove the original laser rail and laser.
2. Select the appropriate slide rail from the accessories.
3. Securely fix the slider using provided screws.
4. Install the laser onto the slider and connect the trachea.

Part 7: Connecting the Power Adapter
Determine the appropriate power adapter based on the model of your engraving machine. Connect the adapter accordingly to ensure proper power supply.

Security Statment and warning

Before Using the laser engraving, please read this safety guide carefully, it mentions situations that require special attention and includes warnings of unsafe practices that can cause damage to your property or even endanger your personal safety.

1. This product is a laser engraver system component, that must be installed in other manufacturers of laser engravers for use.And the product belongs to Class 4 laser products, the laser system itself must meet the requirements of IEC 60825-1 latest version, otherwise, the product is prohibited from being used.

2. Your laser engraver shall have a protective housing which, when in place, prevents human access to laser radiation.

3. If a protective housing is equipped with an access panel that provides “walk-in” access then:

4. means shall be provided so that any person inside the protective housing can prevent activation of a laser hazard that is equivalent to Class 3B or Class 4.

5. warning device shall be situated so as to provide adequate warning of emission of laser radiation equivalent to Class 3R in the wavelength range below 400 nm and above 700 nm, or of laser radiation equivalent to Class 3B or Class 4 to any person who might be within the protective housing.

6. where “walk-in” access during operation is intended or reasonably foreseeable, emission of laser radiation that is equivalent to Class 3B or Class 4 while someone is present inside the protective housing of Class 1, Class 2, or Class 3R product shall be prevented by engineering means.
   NOTE Methods to prevent human access to radiation when persons are inside the protective housing can include pressure-sensitive floor mats, infrared detectors, etc.

7. The laser itself has a protective cover, the protective cover is fastened by screws. When the laser is installed on the laser engraver, the protective cover should be checked to be reliably locked, and can not be removed in the energized state.

8. The housing of the laser engraver should have an interlock function. When the housing is opened or removed, the laser can be automatically turned off.

9. The laser engraver should have an emergency stop button, which can immediately stop the output of the laser when pressed under unexpected circumstances.

10. The laser engraver should have a reset button, which can resume work under the condition of confirming safety after lifting the interlock or emergency stop.

11. Laser engravers should use physical keys, dongles, password systems and other ways to manage and control, to prevent personnel without security training from operating this kind of equipment.

12. On the laser engraver any window or channel that can actively observe or passively receive the laser radiation should be set up with warning marks.

13. If the laser burns the skin or eyes, please go to a nearby hospital for examination and treatment immediately.

Disclaimer and warning

This product is not a toy and is not suitable for people under 15 years of age. Do not allow children to touch the laser Module. Please be careful when operating in scenes with children. This product is a laser module, visit http://www.atomstack3d.com/laserengraverdownload for a complete “user manual” and the latest instructions and warnings. Shenzhen AtomStack Technologies Co., Ltd. (Atomstack) reserves the right to update this Disclaimer and Safe Operation Guidelines. Please be sure to read this document carefully before using the product to understand your legal rights, responsibilities and safety instructions; Otherwise, it may bring property loss, safety accidents and hidden danger to personal safety. Once you use this product, you shall be deemed to have understood, accepted and accepted all terms and contents of this document. The user undertakes to be responsible for his or her actions and all consequences arising therefrom. User agrees to use the Product only for legitimate purposes and agrees to the entire terms and contents of this document and any relevant policies or guidelines that AtomStack may establish. You understand and agree that AtomStack may not be able to provide you with the cause of the damage or accident and provide you with AtomStack’s after-sale service unless you provide the original engraving or cutting files, engraving software configuration parameters used, operating system information, video of the engraving or cutting process, and operational steps prior to the occurrence of a problem or failure. AtomStack is not liable for any and all losses arising from the user’s failure to use the product in accordance with this manual. Atomstack has the ultimate right to interpret the document, subject to legal compliance. Atomstack reserves the right to update, modify, or terminate the Terms without prior notice.

Accessories list

Function description of adapter board

If your laser is in the form of the picture below, please follow the steps below to install the combination slider

Installation steps

1. Remove the original laser fixing plate and laser
2. Find this combination slide in accessories
3. Fixed combination slider
4. Fixed combination slider
5. Install the laser
6. Install the air pipe

If your laser is in the form of the picture below, please follow the steps below to install the slider

Installation steps

1. Remove the original laser rail and laser
2. Find the slide rail that fits the model in the accessories
3. Fixed slider
4. Laser installation
5. Assemble the trachea

How to connect the power adapter

The voltage of the M100 module is DC24V, the following models need to add a power adapter board to use. A5 10W; A5 20W; A5 30W; A5 PRO; A5 PRO+ ;A5 M30; A5 M40

The user’s original adapter is connected to the one-to-two transfer cable, and one end of the one-to-two transfer cable is connected to the air pump; the other end is connected to the control box. The 24V adapter in the M100 module is connected to the “POWER” position on the adapter board. The 3PIN cable of the engraving machine originally connected to the laser is now connected to the adapter board “Input c”. Find the laser adapter cable from the accessories, connect one end of the 3PIN to the adapter board “Output”, and connect the 4PIN end of the laser adapter cable to the M100 module

A5 M50; A5 M50 PRO; X7; X7 PRO; A10; A10 PRO; S10 PRO The connection method of the power adapter of these models

The user’s original laser engraving machine adapter is connected to the air pump; the DC24V adapter equipped with the M100 module is connected to the control box. The control box can be compatible with DC24V

Precautions:
The 20W module is relatively heavy, in order to make the machine work without shaking and work more stably. We added a screw on the laser to limit the laser to work as close to the height of the POM wheel as possible. Can be removed if not needed

A lot of smoke is generated in engraving or cutting wood and other objects, be aware of cleaning the air guide hood and anti-skid cover, since there may be a lot of dust accumulation on it, especially when working with more than 50% of the laser power. Remove the shield if you could, or turn on the air assist while the machine is working, all of which would significantly reduce dust accumulation

The laser power of this machine is very high, if you need to cut wood and other flammable materials with a power of more than 70%, please ensure someone is watching the machine in case the flammable materials catch fire.

Cautions: LASER BEAM CAN DAMAGE EYES

Laser Light can damage the human eyes and skin. Do not expose the eye or skin to laser light directly. This Laser product has an optical lens and emits a collimated laser beam. The light from this product, both direct and reflected, is very harmful as it can propagate a long distance while maintaining high optical density. When handling the product, wear appropriate safety glasses (OD5+) to protect your eyes from laser light including reflected and stray light. The reflected and stray light spilling into an unintended area should be attenuated and/or absorbed.

Maintenance instructions and warning

This product uses a highly integrated design and requires no maintenance. However, if the laser system installed with this product needs to be repaired or tuned, please:

1. Unplug the power cord on the laser, so that the laser is in a state of power failure;
2. If you need laser assistance for tuning, please:
3. All present personnel wear protective glasses, OD5+ protective glass is needed ;
4. Make sure there are no flammable or explosive materials around;
5. The position and direction of the laser are fixed to ensure that the laser will not accidentally move and shine on people, animals, flammable, explosive and other dangerous and valuable objects during debugging.
6. Don’t look at lasers
7. Do not shine the laser on the mirror object, lest the laser reflection cause accidental injury.

Customer Service:

• For detailed warranty policy,please visit our official website at: www.atomstack.net
• For technical support and service, please email: support@atomstack.net

Manufacturer : Shenzhen AtomStack Technologies Co., Ltd.
Address: 202, Building 1, Mingliang Technology Park, No. 88 Zhuguang North Road, Taoyuan Street, Nanshan District, Shenzhen, Guangdong, China

Scan the code to enter the discussion group.

Scanner APPLICATION:
QR code reader/ Barcode scanner or any APP with scanner.

FAQ

Q: How do I know if I need to add a power adapter board to use the M100 module?
A: If your engraving machine model is A5 10W; A5 20W; A5 30W; A5 PRO; A5 PRO+; A5 M30; A5 M40, you will need to add a power adapter board as the M100 module operates on DC24V.

Q: What should I do if the laser module is not working stably?
A: Ensure that the laser is positioned correctly and securely fixed to minimize vibrations. Refer to the installation manual for guidance on proper installation.

References

• Atomstack Official Store - Laser Engraving Machine

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>