vogel s TVM 3220, 3240 Series Full Motion TV Wall Mount Installation Guide
- June 13, 2024
- vogel s
Table of Contents
TVM 3220 Series
TVM 3240 Series
Full Installation Guide
Everything you need to get your TV safely on the wall, in no time
Before you start
…we just wanted to say thanks for choosing Vogel’s. Smart choice.
And you’re already making another smart choice – reading the manual! Keep
reading to learn all
about safe, efficient installation, and how to use your new mount.
Stay safe
Warning
Always read these safety instructions carefully before installing and using
this product.
Following these instructions is strictly required. Incorrect mounting and/or
installation could put you, your TV, and your family at substantial risk.
Don’t dare risk it… Read all
- Vogel’s recommends that the mounting and/or installation of this product should be carried out by a suitably qualified expert.
- Vogel’s cannot be held responsible for any injury and/or damage caused by incorrect installation.
- Please consult the manual for your TV and ensure that the weight and size of the TV is within the maximum weight and size limits specified for this product, and that the TV mounting bolts used are of a suitable length and diameter. Note that not all the TV mounting accessories provided are required for the installation of any one TV.
- The wall mounting accessories provided are exclusively intended for installation on walls made of solid brick, solid concrete or solid wood columns.
- Any material covering the wall must not exceed 3 mm/ 0.12 inch.
- For mounting on walls made of other materials, such as hollow bricks, wood panels or plasterboard, please consult your installer and/or specialist supplier.
- Clean the product with a dry, lint-free cloth. Do not use detergents or other solvents to clean the product.
- Only qualified, certified personnel may repair the product. Use only original spare parts. The use of other parts will result in voiding the warranty, and could lead to injuries.
- Alterations to the product and technical modifications are not permitted. This will void the warranty, and could lead to injuries.
- Always store the product in a dry and safe place with a temperature between -10°C to +50°C.
- Handle and transport the product with care.
- Repack the product when transporting or not using it for a longer period of time.
- Lifting your TV is a two-person job. Don’t be bold!
What’s in your box?
- Something missing? Make sure your packaging has everything in place:
A. Wall mount
C. Center plate
D. Safety instructions
E. Bolts for fastening plate on TV (see contents below)
F. Spacers
G. Washers Ø 18 mm
H. Screws
I. Plugs (fischer© DuoPower)
J. Washers Ø 22 mm
K. Covers
L. Protective TV patches
M. Cable clip or clips (depending on model)
N. Cable clip for wall plate
O. Spirit level
P. Thumbnuts (pre-attached to center plate for some models)
- Contents of the TV fasteners kit:
- 4x M4*12mm bolts
- 4x M4*25mm bolts
- 4x M6*12mm bolts
- 4x M6*25mm bolts
- 4x M8*12mm bolts
- 4x M8*25mm bolts
- 4x M8*45mm bolts
- 4x M6 washer
- 4x spacer 10mm
You just need four bolts to mount your TV. Store the rest for other use!
Got your tools ready?
- Don’t start without all the necessary tools:
- Crosshead screwdriver
- Drilling machine
- 8mm or 5/16” concrete / brick drill (for concrete / brick walls only)
- 4mm or 5/32” wood drill (for walls with wooden studs only)
- Stud finder (for walls with wooden studs only)
- Socket wrench no. 10
- Pencil
- M4 (4mm) Allen key
Take care of your safety
- Who cares about looking cool? Always wear personal protective equipment:
- Eye protection
- Ear protection
- Safety shoes
Ready… set… get installing!
Step 1: Attach the center plate to the TV
- Put the TV carefully on a soft clean surface without any obstacles.
- For models where the thumbnuts are pre-attached: remove both thumbnuts Ⓟ from the center plate Ⓒ .
- Screw the center plate Ⓒ on to the TV with the bolts Ⓔ and washers Ⓖ .
Are you missing any bolts? Or need different ones? The friendly team at Vogel’s Consumer Care are waiting to help: vogels.com/contact
Refer to the user manual of your TV for the correct bolt sizes. Make sure bolts and washers are positioned correctly. Use spacers where needed.
Step 2: Attach the wall mount to the wall
How well do you know your walls? What they’re made of matters more than you think…
Concrete / Brick wall
Don’t drill yet! Try our free DrillRight™ AR app to find just the right height and mark the first hole, easily
- Find the perfect spot for drilling with our DrillRight™ AR app and the included drilling template.
- Drill the holes.
How deep do you drill? Check the length of the screw (not the plug!) to find the right depth – this stops things from breaking.
3. Attach the wall mount Ⓐ to the wall with the screws Ⓗ , washers Ⓙ and plugs Ⓘ . Use the spirit level Ⓞ to level the wall mount.
Lubricate the screws for easy screwing in.
4. Place the covers Ⓚ .
Walls with wooden studs
Don’t drill yet! Try our free DrillRight™ AR app to find just the right height and mark the first hole, easily.
- Don’t just guess! Always use a stud finder to determine the position of studs.
- Find the perfect spot for drilling with our DrillRight™ AR app and the included drilling template.
Don’t destroy your belongings! The wall mount must always be attached to the studs.
3. Now for the fun part… drilling the holes.
4. Attach the wall mount Ⓐ to the wooden wall with the screws Ⓗ and washers Ⓙ . Use the spirit level Ⓞ to level the wall mount.
Lubricate the screws for easy screwing in.
5. Place the covers Ⓚ .
Other wall type / I don’t know my wall type
If your wall is a little special – for example, hollow bricks, metal stud walls, wood panels or plasterboard – or you simply aren’t sure, don’t worry! Just ask your installer, specialist supplier or the Vogel’s Consumer Care team at www.vogels.com/contact.
Step 3: Attach the TV to the wall mount
1. Carefully lift and attach the TV to the wall mount Ⓐ .
2. Attach the center plate Ⓒ to the wall mount Ⓐ with the thumbnut Ⓟ and tighten with an allen key. Make sure the TV is levelled, using the spirit level.
Lifting your TV is a two-person job. Don’t be bold!
Job done now! Enjoy watching your TV!
Handy features
Having a cable mess? Do you need inspiration about how to hide and guide your cables or how to place other TV accessories? Take a look at our website vogels.com!
Tilt to avoid reflections
- Adjust the tilt angle by pulling the TV forwards or backwards.
- Optional: If the screen tilts downwards. Tighten the bolt with key.
Guide your cables
- Guide the cables.
- Place the cable clip Ⓜ on the lower arm, where needed.
- Place the cable clip Ⓝ on the wall plate.
Removing your TV
- Remove the thumbnut Ⓟ .
- Pull the bottom of the TV forward.
- Remove the TV, and put it down somewhere safe.
Again, lifting your TV is a two-person job. Always get help.
Tell us how you feel!
Your opinion matters more than you might think. It helps us make better
products, and helps other customers make informed choices.
Share your feedback, and sign up to win Vogel’s products!
Simply visit vogels.com/review for sharing or the Terms
and Conditions.
Confused? Unsure? Going crazy?
There’s plenty of help waiting for you, online:
info@vogels.com
www.vogels.com/contact
facebook.com/
VogelsForSure
instagram.com/
vogels_official/
www.youtube.com/
c/VogelsForSure
Simple troubleshooting
Found a problem you can’t fix? Don’t panic… try these!
Problem | Cause | Solution |
---|---|---|
‘There are stains on the arms of the wall mount’ | The stains are caused by the |
paper pulp interior in the box. We decided to reduce the amount of plastic in
the packaging and therefore there is no plastic bag around the product anymore
to prevent from some paper dust on the product. So, these stains might occur.|
The stains are easy to remove with a cloth.
‘My TV does not remain leveled horizontally, with moving / turning it’| When
you level your TV and tighten the thumbnut by hand, it might not be tight
enough to stay level.| Level the TV with a spirit level and tighten the
thumbnut thoroughly with a 4 mm allen key, instead of by hand.
‘I don’t have the right bolts for my TV!’| The world of TV technology is
always changing – it can be hard to keep up sometimes. So, it might be the
case that the correct bolt size is not included… you’re just too advanced!|
Just ask Vogel’s Consumer Care to request a service kit, and we’ll send
everything you need. Click here to contact Vogel’s Consumer Care.
‘I have a lot of leftover bolts, is something wrong?’| No, you did it very
well! You only need 4 bolts to install the mount to your TV. Because of all
the different types of TVs, we have included the most common sizes for the
most sold TVs.| Don’t waste the other bolts, save them! You can use them for
another TV when you buy a new one or use it elsewhere.
‘My wall screws have snapped!’| You might not be drilling deep enough… or your
drill could be too blunt, so that the hole is too narrow and the screw gets
stuck.| Use another hole in the wall plate to fix the wall mount to the wall.
Make sure you use a sharp drill of the correct size. Use the size of the screw
as indication of the depth to be drilled.
FAQs
‘Where can I request the correct bolts for my TV (a service kit)?’| Whatever
you need, simply contact your local Vogel’s dealer or Vogel’s. Click here to
contact Vogel’s Consumer Care.
---|---
‘Where can I find installation videos?’| Click or tap the button on the front
page of this manual. The installation video can be found at the product page
of your product on our website. It can also be found on our YouTube channel:
www.youtube.com/c/VogelsForSure
‘What if I need spare parts?| ’ If you require a spare part, please contact
your local dealer or Vogel’s . Click here to contact Vogel’s Consumer Care.
‘Where can I find the drilling template?’| The drilling template is printed on
the inlay card in the box. You can cut it out for your convenience.
‘How high do I need to hang my TV?’| The center of your TV should ideally be
positioned at eye level, while seated. Download and use the free DrillRight™
AR app to determine the height of the TV and to mark the first hole.
‘How high do I need to hang my TV in case of a tilt mount?’| When a wall mount
with tilt function is used, your TV can be mounted above eye level.
‘Which bolts or screws do I need to use?’| Use all wall screws and four bolts
for securing your TV. Vogel’s offers a complete assembly kit with all mounting
materials included in the box, for both your TV and wall. Do you miss the
correct bolts for your TV? Please contact your local Vogel’s dealer. Click
here to contact Vogel’s Consumer Care.
‘Why do you use Fischer© plugs?’| The Fischer© DuoPower plug is widely
regarded as the best standard in plugs. Don’t settle for less!
‘What is VESA?’| VESA is a standard pattern of mounting location holes on the
back of a TV which allows many standard TV mounts to be easily fitted to your
TV.
Go green!
We care about the planet. If you’re getting rid of the packaging or the TV mount itself, please visit your local recycling facility, or contact your municipal office. Recycling matters!
Guarantee
Thanks again for choosing Vogel’s! Durability is paramount in the development and production of our products. For this reason, we are able to provide a product guarantee for the reasonable service life of all of our wall mounts. We resolve any issues regarding product complaints or returned products and assess all complaints based on usage.
If your product is not functioning properly due to material faults or manufacturing defects, we will repair it free of charge or replace it at our own discretion.
If you have any problems with our product or want to know whether the guarantee is applicable, please:
- Complete the contact form or mail our Consumer Care Team. Preferably, please add a picture.
- Within 2 business days you will be contacted by our local Vogel’s distributor.
- If the guarantee is invoked, the product should be returned, together with the original purchase document (invoice, sales slip or cash receipt). The purchase document should clearly show the name of the supplier and the date of purchase. You will be informed about the specific return address and further procedure.
Vogel’s guarantee shall lapse in the following cases:
- If the product has not been installed or used in accordance with the instructions;
- If applicable, if the holes in the wall have not been properly drilled in accordance with the Vogel’s installation instructions for the applicable wall type;
- If the product has been altered or repaired by someone other than Vogel’s;
- If a fault arises due to external causes (outside the product) such as for example lightning, water nuisance, fire, scuffing, exposure to extreme temperatures, weather conditions, solvents or acids, wrong use or negligence;
- If the product is used for different equipment than is mentioned on or in the packaging.
Do you have any other questions? Please make use of our contact form.
References
- Vogel’s official webshop in the United Kingdom | Vogel's
- Our customer Service | Vogel's
- Write product review for a chance to win | Vogel's
- Our customer Service | Vogel's
- Login • Instagram
- Vogel’s official website in the United States | Vogel's
- Write product review for a chance to win | Vogel's
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>