ENGO CONTROLS E55W230WIFI Wi-Fi Thermostat Suitable for 55×55 Switch Frame User Guide

Quick Guide
Ver. 1.1
Release date: V 2024
Soft: Main module v2.0.2
MCU v1.4.4

E55W230WIFI Wi-Fi Thermostat Suitable for 55×55 Switch Frame

Wi-Fi Thermostat suitable for 55×55 switch frame

Technical specifications

Hysteresis (±0,1°C  –  2,0°C)
Communication| Wi-Fi 2,4 GHz
Control output| COM / NO (voltage-free relay)
Dimensions [mm]| 55 x 55 x 39 (17 after mounting in a box with a diameter of 60)

INTRODUCTION

Flush mounted temperature controller for mounting in 55×55 mm frame. Designed to control surface heating characterized by high thermal inertia. It can also control any other type of heating, as well as cooling systems – according to the user’s needs and settings. The built-in Wi-Fi module allows easy installation and operation of the heating system using the ENGO Smart mobile app. This product connects directly to the Internet via a 2.4GHz Wi-Fi network.

Products features

| Wi-Fi 2.4 GHz communication standard
---|---
| compatibility with the ENGO Smart application (in Tuya Cloud technology)
| TPI algorithm ideal for underfloor heating
| HEATING/COOLING function

Product Compliance
This product complies with the following EU Directives: 2014/53/EU i 2011/65/EU.

SAFETY INFORMATION

Use in accordance with national and EU regulations. Use the device only as intended, keeping it in a dry condition. The product is for indoor use only. Please read the entire manual, before installation or use.
Installation:
Installation must be performed by a qualified person with appropriate electrical qualifications, in accordance with the standards and regulations in force in a given country and in the EU. The manufacturer is not responsible for non-compliance with the instructions.
WARNING:
For the entire installation, there may be additional protection requirements, which the installer is responsible for.

Connection description

a) Connection diagram for boiler: b) Connection diagram to pump / actuator: c) Connection diagram to the control box: Legend:

| Boiler connection* – Boiler’s contacts for ON/OFF thermostat (according to the boiler’s instructions)
---|---
L, N| 230V AC power supply
COM, NO| Voltage-free output
S1, S2| Input terminals
| Pump
| Valve actuator
| Fuse
| Temperature sensor

LCD Icon Description + Button Description

1. ”Down” Button
2. ”MENU” Button
3. “Up” Button
4. Cloud connection
5. Wi-Fi connection
6. Current/Setpoint temperature
7. Heating indicator
8. Cooling indicator
9. Schedule mode icon
10. Temporary override mode
11. FROST (anti-freeze mode)
12. Temperature unit
13. Settings icon / temperature settings
14. Settings icon
15. Button lock
16. External/Floor or Occupancy sensor

| Change the parameter value up
---|---
| Change the parameter value down
| Manual/Schedule mode
– short button press (Online mode)
Enther the installer parameters
– hold 3 seconds
Turn OFF/ON thermostat
– hold 5 seconds
| Enter the pairing mode
– hold until the PA message appears
Factory reset
– hold until the FA message appears
| Lock/Unlock thermostat keys
– hold 3 seconds
| Heating/Cooling mode change
– hold 3seconds

Installation thermostat in the app
Make sure your router is within range of your smartphone. Make sure you are connected to the Internet. This will reduce the pairing time of the device.
STEP 1 – DOWNLOAD ENGO SMART APP
Download the ENGO Smart app from Google Play or Apple App Store and install it on your smartphone.

| | ****
---|---|---
https://play.google.com/store/apps/details?id=com.engo.smartlife| https://apps.apple.com/us/app/engo-smart/id1606693444

STEP 2 – REGISTER THE NEW ACCOUNT
To register a new account, please follow the steps below:

Click „Register” to create new account. Enter your e-mail address to which the verification code will be sent. Enter the verification code received in the email. Remember that you only have 60 seconds to enter the code!! Then set the login password.
STEP 3 – CONNECT THE THERMOSTAT TO WI-FI
After installing the app and creating an account: On your mobile device, make sure the ENGO Smart has access to permissions (Location, Bluetooth, Nearby devices). Then turn on Bluetooth and Location. Connect to 2.4GHz Wi-Fi network to which you want to assign the device. Make sure the thermostat is powered on. Then press and hold the buttons on the thermostat for approx. 3 seconds until the display shows „PA”. Then release the keys. The pairing mode will be started up. In the app, select: „Add Device”. After finding the thermostat, go „Add”.

Select the Wi-Fi network in which the thermostat will operate and enter the password of this network. Wait for the app to configure the thermostat with the selected Wi-Fi network. Go „DONE”. The thermostat has been installed and displays the main interface.

Factory reset
To RESET Thermostat to factory settings, hold down the buttons until the FA message appears. Then release the keys. Thermostat will restart, restore default factory settings and displays the home screen. The device will be removed from the app you will need to add it again.

Installer settings

To enter installer parameters press and hold button for 3 seconds. Use or . button to move between parameters. Enter the parameter by . Edit the parameter using or . Confirm the new parameter value with the button.

Installer parameters

will be
ttrned off, when the temperature of the floor
sensor rises above the maximum value.| 35°C
P09| Mirnimum l oor
tempeauefoheating| SC-45C
| ‘wader t o p otec t he floor, the heat ng wi ll be swtcedonwhentheemperattreofthefloo sensor bops teb.v the minirntrn value.| 10% P10| WIMIUM Nei temperatu  reforcooling| SC – 451| In order to protect the noor cooling will be
switched on, when the temperature of the floor
sensor exeeds the mainium value.| 15°C
P11| Minimum floor
temperature for cooling| SI – 45°C| In order to protect the floor, cooling will be
Kaneda( when the temperature of the floor
sensor drops below the minimum value| rc
P12| Vale protection| ON| Function enabled| ON
OFF| Faction (babied
P13| PIN Code for settings access| NO| Finction cisabled| NO
PIN Code for settings access| PIN| Function enabled
P 14| PIN code| O03-xa| User PIN| 0
P15| Require a PIN to unlock the keys every time (function active when P13=PIN)| NO| Function dsabled| NO
1,3| Function enabled
CLR| Restoration default  value| NO| No| NO
YES| Yes

Producer:
Engo Controls S.C.
43-262 Kobielice
4 Rolna St. Poland
Distributor:
QL CONTROLS Sp z o.o. Sp. k.
43-262 Kobielice
4 Rolna St. Poland
www.engocontrols.com

References

• ENGO Controls - Sterowanie ogrzewaniem

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>