tuya TYTE-D1 WiFi Smart Switch User Guide
- June 12, 2024
- Tuya
Table of Contents
tuya TYTE-D1 WiFi Smart Switch
Parameters
- Input voltage: AC 85V-250V
- Max.Current: 16A
- Wi-Fi Standard: Wi-Fi 2.4Ghz b/g/n+Bluetooth
- Temperature display accuracy: 0.1 °c
- Radio Freqcency: 433Mhz
- Working temperature: -20°C~70°C
- Size: 965331 mm
Checklist before using the device
- Your smart phone or tablet has connected to a 2.4g WiFi with internet.
- You need to enable Bluetooth of the phone.
- You have the correct WiFi PWD.
- You smart phone or tablet must have access to APP store,Google play.
- Your router is MAC-open.
User Guide
- You can download the App by searching “Tuya Smart” in mobile app stores or scanning the following QR code
- Register an Tuya Smart account.
- If you have Tuya Smart account. just login.
Add devices
-
Reset the device first:
if the network indicator blinking fast
(0.55/time) , skip the reset step. -
Power on
-
hold down the Reset button for 6 seconds.until network indicator blinking fast(0.5s/time).
-
Clicking in the top right corner on Tuya Smart app.then click “Auto Scan” , wait a few seconds, After the devices are found, Click “Next”
-
Select a 2.4GHz Wi-Fi network and enter your password.
-
Name your device
-
When the network is disconnected, the switch will automatically switch to the Bluetooth control of the phone.
-
Click the on/off buttons on the APP can controldevice,Manual control switch also can be display real-time on the APP.
APP Function
.
Remote control matches the code
Matching:
- hold RF Pairing button for 3 seconds you want to match, until RF Pairing indicator (blue light)is on.
- then long press the remote control button you want to match
- loosen the remote control buttons, matching success
Clear code:
Long press the RF pairing button for 15 seconds (RF pairing indicator is
always on), loosen the RF pairing button until RF pairing indicator(blue
light) is off.
- note: the matching/clear code method is only available with RF function switch/module reference.
TROUBLESHOOTING
Enter the homepage of App,click the icon in the lower right corner of the interface to enter.