Apps Smart Camera Linklemo App Instruction Manual
- June 12, 2024
- APPs
Table of Contents
Apps Smart Camera Linklemo App
USING INSTRUCTION
Download and Install the APP
Use the browser, scan the QR code to download and install it; or search
“Linklemo” in Apple Store / Google Play / mobile app store and
APP Connection
- Open the APP, register and log in;
- Open the mobile phone settings to connect to 2.4G WiFi(wireless fidelity) and turn on the mobile phone Bluetooth;
- Enter the distribution mode: press the switch button for 2 seconds to start on, then press the reset button for 5 seconds until the blue indicator flashes into the distribution mode.
- Click “Add Device” in the APP to automatically scan devices until the device is scanned (FIG. 1), click “Bind Now” for corresponding device and click “Next” (FIG. 2). After adding the successful blue indicator lights on, you can customize the device name(FIG. 3), which means successful addition.
If the device cannot be added for a long time, long press the MODE key for 5 seconds to re-enter the distribution network mode
AP mode [no network connection]: press the switch button for 2 seconds, then press the reset button for 5 seconds until the blue indicator flash; find and connect the wifi before “LLM _” with the password 12345678; Open the APP to use it.
Note: 1. When using the wireless connection mode, you need to maintain the WiFi connection; 2. When you return to the APP, select Cancel when prompting the networking popup.
Matters Needing Attention
- Ensure that Bluetooth is turned on and the WiFi network environment is good. The device does not support 5G WiFi;
- Try not to stick to the metal door above the installation;
- You must set permissions through the APP to normally use the product;
- Ensure that the power supply is sufficient and the power supply is connected:
Product statement
This product is limited to outdoor sports enthusiasts, outdoor cycling and driving records; other scenes are strictly prohibited. Please contact customer service to verify and use, no illegal use. If someone uses the product, all the consequences shall be borne by the user and not related to the inventor and the manufacturer of the product!
FCC
FCC Warning
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- this device may not cause harmful interference,
- this device must accept any interference received, including interference that may cause undesired operation.
CAUTION: Any Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, under part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used by the instructions, may cause
harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>