techtron TS5 EVO Electric Scooter Instruction Manual

June 12, 2024
techtron

techtron TS5 EVO Electric Scooter

techtron-TS5-EVO-Electric-Scooter-product

TS5 EVO Electric Scooter

Specifications

  • Max Speed: 40km/h
  • Charging Time: 8-9 hours
  • Battery Life: Up to 25km per charge
  • Weight Capacity: 120kg
  • Display Panel: Speed modes, battery level indicator, cruise control

Product and Accessories
The TS5 EVO electric scooter comes with various accessories including an electronic throttle, dashboard, headlight, quick release lever, folding mechanism, brake light, rear fender, hub motor, disc brake, front and rear suspension, charge port, battery compartment, and kickstand.

Assembly

  1. Unfold the handlebar stem and fasten it. Then unfold the kickstand to support the eScooter.
  2. Firmly connect the wires inside the handle and the stem. Slide the handle onto the stem. Be aware of the correct orientation.
  3. Install 4 screws (two on each side) with the included hex wrench.
  4. Verify that your eScooter can be powered on and off.

Folding

Folding Mechanism: The TS5 EVO can be easily folded for transporting. Unscrew the locking bolt, collapse the standpipe, and hook onto the folding clasp.

Mechanical Bell & Indicators

  • Mechanical Bell: A traditional sounding bicycle bell.
  • Indicators: Left and right indicators contribute significantly to rider safety by communicating intentions to other road users.

Charging

USB Device Charging: The TS5 EVO has a USB 2.0 port for charging mobile devices. Charging time is approximately 8-9 hours for a full battery charge.

Display Panel Function
Speed Mode Presets: The display panel offers three speed modes – Eco, Drive (D), and Sport (S). Each mode has a default maximum speed setting.

FAQ

  • Q: How do I activate cruise control on the TS5 EVO?
    A: To activate cruise control, maintain the same speed for 10 seconds, and the device will beep when the mode is activated. Cruise control will deactivate when applying the brake.

  • Q: What should I do if the battery level indicator shows only one bar?
    A: When only one bar is displayed on the battery level indicator, it indicates that the battery power is less than 10%. We recommend recharging the eScooter when the power drops to a single bar to avoid unexpected stops.

Ethos

Welcome to techtron®. By combining passion,
drive and intellect with market leading research
and cutting-edge technology, we innovate and deliver premium quality products that excite, inspire and challenge the sector. Striving for perfection, embracing new ideas and investing in the future is our ethos.

Future Tech. Today

Product and Accessories

  • A Electronic Throttle & Power Button
  • B Dashboard
  • C Headlight D
  • D Quick Release Lever
  • E Folding Mechanism
  • F Buckle
  • G Brake Light
  • H Rear Fender
  • I Hub Motor
  • J Disc Brake
  • K Front and Rear Suspension
  • L Charge Port
  • M Battery Compartment
  • N Kickstandtechtron-TS5-EVO-Electric-Scooter- \(1\)

Product and Accessories

techtron-TS5-EVO-Electric-Scooter- \(2\)

Assembly

techtron-TS5-EVO-Electric-Scooter- \(3\)

Folding

Folding Mechanism
The TS5 EVO can be easily folded for transporting. First unscrew the locking bolt in figure 1, then collapse the standpipe and hook onto the folding clasp as shown in figure 2.

Mechanical Bell & Indicators

techtron-TS5-EVO-Electric-Scooter- \(4\)

Charging

Charging Time
Please allow 8-9 hours for the eScooter’s battery to fully charge.
To charge, open the rubber stopper on the side of the base and plug into the power supply. Replace the stopper after charging to prevent water damage.

USB Device Charging
The TS5 EVO has a USB 2.0 port for charging mobile devices.

techtron-TS5-EVO-Electric-Scooter- \(6\)

Speed Mode Presets
The TS5 EVO comes with three pre-configured factory default speed modes (these can be changed via the techtron® smart app – see page 12).

Factory default speed modes

Mode| Default| Maximum *
Eco| 15km/h| 25km/h
Drive (D)| 20km/h| 25km/h
Sport (S)| 25km/h| 40km/h

Sport mode (S) is actually capable of  a maximum speed of 40km/h, which can only be achieved using the techtron® smart app. Please note the UK speed limit for eScooters is currently 15.5mph (25Km/h) at the time of going to print.*
The display can also be configured to show speed in mph or km/h using the smart app.

Display Panel Button
With a quick double click of the power button, the user can toggle between the device’s three speed mode presets. The eScooter’s lights can also be turned ON/OFF by a single press of the button. To turn the eScooter ON/OFF, hold down the button for three seconds.

Battery Level Indicator
Five bars along the centre of the display panel indicate the current charge status. When a single bar is displayed, this indicates battery power is less than 10% and the eScooter will eventually slow to a natural stop when the remaining power is used.
We advise the eScooter be recharged when power drops to a single bar.

Display Panel Function

Power Saving
When not in use the techtron® eScooter will power down automatically after 15 minutes.

Cruise Control
To activate cruise control, maintain the same speed for 10 seconds, the device will then beep when the mode is activated. Cruise control will deactivate when applying the brake.

Diagnostics
Thermometer and spanner icons are briefly displayed on the control panel at start-up, indicating the eScooter’s diagnostic check. These will only stay on permanently if a problem is detected.
Thermometer: Indicates there isa problem with the motor temperature. If the temperature of the motor is more than 90˚C, the eScooter will stop working in order to protect the motor.
Spanner: Indicates an electrical fault, which also displays a fault code.
Please consult the troubleshooting guide (page 19) for further detail.

techtron® Smart App
Your eScooter can be configured using the techtron® smart app. Use it to set up your desired settings such as riding mode and speed limiter. You can even lock the eScooter to prevent unauthorised access.
Please note – the eScooter will remember all settings applied in the techtron® smart app even when Bluetooth® is disconnected.

techtron-TS5-EVO-Electric-Scooter- \(9\)

  1. Home Screen
    View the remaining range of your eScooter, so you can plan your journey.

    • Light – Turn the main lights On/Off.
    • Settings – Access further controls.
    • Lock – Secure your eScooter against unauthorised access.
    • Connection – Discover and pair your eScooter to your smart device.
    • Riding mode – Toggle between riding modes.
    • Trip info – View the latest trip information.
    • Cruise control – Quickly toggle this option On/Off.
  2. Settings

    • Unit – Change the unit of measurement used to display your speed from km/h to mph.
    • Cruise control – Maintain a constant speed for those longer journeys.
    • Riding mode – Choose your preferred speed preset (options vary depending on model).
    • Speed limiter – Control the maximum speed the eScooter can go.
    • Zero start – Enable the option to start your eScooter from stationery position (enabling this option can reduce battery range).
  3. Trip Info
    View your eScooter’s latest trip information, anything from total driving time to voltage and power statistics.
    The device firmware can also be upgraded by the user from this menu (internet connection required).

Download to your smart device via the Apple App Store or Google Play.

Maintenance and Warranty

techtron-TS5-EVO-Electric-Scooter- \(12\)

Cleaning and Storage
Use a soft cloth dipped in a small amount of water to wipe the eScooter; for any difficult to clean areas, you can use toothpaste and gently brush with a toothbrush, then use a damp cloth to clean.
Do not use alcohol, petrol, kerosene, or other corrosive, volatile chemical cleaning solvents, as this will seriously damage the appearance and internal structure of the body. Do not use pressure washers to clean. Ensure that the charging cable has been unplugged and the rubber stopper on the charging port is closed. Otherwise, there may be a chance of electric shock or serious failure due to internal water intake.

Warranty Policy
techtron® offers a one-year guarantee on rechargeable batteries. Two-year guarantee against parts and/or manufacturing defects, Terms & Conditions/Exclusions apply, please see website for further details.

Product Registration
For exclusive offers, product support and information on the latest techtron® innovations, register your product by returning the enclosed warranty card, or complete the form on the
website with your serial number and details – https://techtron.co/pages/warranty

Battery Maintenance and Disposal
Do not touch the battery contacts, and do not open or expose the shell. Avoid metal objects touching the battery contacts, as this will cause a short circuit, damage to the battery, or even personal injury.
Please refer to the model specifications in this manual for your eScooter’s charging requirements. Only use a charger with the correct voltage otherwise there will be a risk of damage to components or fire.
Ensure batteries are disposed of responsibly. Recharge the battery and store after use, in order to preserve battery life. Do not place the battery in high temperatures higher than 50°C or below -20°C, or it may lead to battery failure, overheating, or even risk of fire.
Always store in a cool dry place fully charged. A battery will be at optimum performance at a standard room temperature. Warranty may be invalid if the battery is removed

This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environment safe recycling.

Rider Guidance, Safety and Specifications

Helmets and Clothing
Wearing a cycle helmet is recommended when riding an eScooter, but it is not a legal requirement. Always make sure that your cycle helmet conforms to current regulations, is the correct size, and
is securely fastened. Wear light-coloured or fluorescent clothing so that other road users can see you at night or whenever visibility
is reduced.
As with any vehicle, the faster the user is travelling, the more braking distance is required. Please respect pedestrians’ right of way when riding the techtron® eScooter.
Riding Safely
Please check the eScooter before riding. Check for loose parts and general tyre wear and tear.
Always start the eScooter by pushing off with your foot first, this reduces the start load on the motor, ensuring a longer battery life.
The techtron® eScooter is designed to perform best on smooth dry surfaces, therefore avoid riding on uneven gravel, sand, grass, slick or wet surfaces. Never ride over curbs or jump. The eScooter is not designed for this type of riding any damage caused to the eScooter while riding in this manner will void the warranty.

techtron® accepts no liability for any injuries caused to rider or damage to property which may arise while riding the eScooter. Never ride the eScooter with more than one person, as
this may lead to loss of control. It is the rider’s responsibility to ensure they comply with all local laws and regulations that may apply while riding the eScooter.

Model specifications

Model TS5 EVO
Range 40km
Power 500W (Peak 1000W)
Top Speed 40 km/h*
Speed Modes 3
Rider Age 18+ years
Max. Load 120kg
Battery 48V 12Ah
Charger 54.6V / 2A
Storage Temp -20˚C to 45˚C
Working Temp -10˚C to 40˚C
Rider Height 150cm – 200cm
Frame Material Steel and Aluminium
Suspension Front and rear
Current Limit 21A
Motor Type Brushless Motor
IP Rating IPX6
Foldable Yes
Tyre Size 10” techtron Airless
Brakes Front and rear
E-ABS Brake Rear E-Brake

Any enquiries regarding maintenance, accessories, security or warranty, please visit the techtron® website: www.techtron.co
or email us: info@techtron.co

Rules of the road and licensing guidance
For the latest up-to-date safety, licensing guidance and rules of the road for UK eScooter users, please consult the UK Government website:
www.gov.uk/guidance/e-scooter-trials-guidance-for- users

Troubleshooting

Error Codes and What They Mean
Faults with techtron® eScooters rarely happen, but if you’re unfortunate enough
to encounter a problem, just cross reference the error code shown on the scooter’s display panel with the ones listed in the table opposite.
If the fault can’t be resolved through simple troubleshooting, and providing your scooter is in warranty, then get in touch with our customer services team. Let us know the error code displayed on your scooter, or give us an idea of the problem you’re having and we’ll do our very best to get you back up and riding as soon as possible.
Thermometer and spanner icons are briefly displayed on the control panel at start-up, indicating the eScooter’s diagnostic check. These will only stay on permanently
if a problem is detected. Maintenance of this kind should only be checked and rectified by a qualified technician.

Thermometer: Indicates there is a problem with the motor temperature. If the temperature of the motor is more than 90˚C, the eScooter will stop working in order to protect the motor.
Spanner: Indicates an electrical fault, which also displays a fault code.

techtron-TS5-EVO-Electric-Scooter- \(16\)

Error code Description Solution
4 Short circuit Check for a short circuit in the wiring/installation or

replace the controller to eliminate the fault.
9| Sub-motor communication failure (dual drive models only)| Check the connection line between the sub-controller and the main controller.
10| Dashboard communication failure| First check whether the connection line between the instrument panel and the controller assembly line is normal or not. Then shut down and restart the eScooter, after re-plugging the assembly line interface. If fault has not disappeared, instrument or controller may need to be replaced to eliminate the fault.
11| Abnormal sensor| Check the line of the phase line of the controller or motor.
14| Throttle chamber abnormal|

  • Check whether the throttle is reset to zero, whether the throttle cable and throttle are normal or not.
  • Unplug the throttle cable and restart the eScooter to troubleshoot the problem.

15| Brake chamber abnormal| Check whether the brake is reset to zero position or not, check the brake line and the brake normal or not. Try unplugging the electronic brake wiring and restarting the eScooter to eliminate the problem.
16| Motor chamber abnormal| Check that the motor chamber wiring is normal or not.

If problem occurs when braking, the motor or controller will need to be replaced.

19| Auxiliary motor chamber abnormality (dual-drive models only)| Check that the secondary motor chamber wiring is normal. Replace motor or controller to eliminate the problem.
21| BMS/BMS

communication abnormal

| BMS/BMS communication abnormal (non-communication battery is ignored).
50| Bus high voltage| Check the battery voltage is normal, cycling failure. Replace the battery or controller to eliminate the problem.
53| System overload| Shutdown and restart the eScooter. If the error code is still displayed, the controller needs to be replaced.
55| Controller high temperature alarm| If the temperature of the controller is too high, allow the eScooter to cool and then restart. If vehicle fails to boot, the controller will need to be replaced.

For further information and advice you can find us at:
e: info@techtron.co
w: techtron.co
techtron® Future Tech Ltd.
techtron® is a Registered Trademark.
V01 01.9.2023

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals