techtron Elite 3500 Electric Scooter Instruction Manual
- June 3, 2024
- techtron
Table of Contents
techtron Elite 3500 Electric Scooter
Ethos
Welcome to techtron® by combining passion, drive, and intellect with market- leading research and cutting-edge technology, we innovate and deliver premium quality products that excite, inspire and challenge the sector. Striving for perfection, embracing new ideas, and investing in the future is our ethos .
IMPORTANT!
Read carefully and keep it for future reference.
Product and Accessories
Assembly
Unfold the scooter standpipe, move the handle into position and lock the folding mechanism in place.
Make sure the brake lever is installed in the desired position. Use the M5 hex key to loosen and tighten the fixing.
Charging
To charge the techtron® eScooter simply open the rubber stopper on the side of the base and plug it into the power supply. Please allow 5-6 hours for the scooter’s battery to fully charge. Replace the stopper after charging to prevent water damage.
Battery level indicator
Five bars along the top edge of the display panel indicate the current
charge status. When only a single bar remains, electricity is less than 10%
and the scooter will eventually slow to a natural stop and must then be re-
charged.
Display Panel Function
Speed display
The techtron® Elite 3500 foldable scooter is capable of a maximum speed of
25km/h, with three pre-configured factory default speed modes. These presets
can be changed via the techtron® smart app (see page 12). The app allows the
user to set a pre-determined speed for each speed mode. The display can also
be configured to show speed in mph or km/h using the techtron® app.
Display panel button
To turn the scooter ON/OFF, hold down the button on the main display panel for
two seconds. With a quick press of the same button, the user can toggle
between the device’s three-speed mode presets. The scooter’s main light can
also be turned ON/OFF by a quick double press of the same button. Press the
button three times to display the total distance traveled, then press another
three times to display your speed again.
Cruise control
To activate the cruise control mode press and hold the accelerator at the same
speed for five seconds, the device will beep when the mode is activated.
Cruise control will deactivate when applying the brake.
Power saving
When not in use the techtron® eScooter will power down automatically after 15
minutes.
Folding
Folding mechanism
The Elite 3500 can be easily folded for carrying and transporting. First,
unlock the standpipe in figure 1, then collapse the scooter and hook it onto
the folding clasp located on the rear mudguard as shown in figure 2.
techtron® Smart App
Your scooter can be configured using the techtron® smart app. Use it to set up your desired settings such as riding mode and speed limiter. You can even lock the scooter to prevent unauthorized access. Please note – the eScooter will remember all settings applied in the techtron® smart app even when Bluetooth® is disconnected.
Home screen
View the remaining range of your eScooter, so you can plan your journey.
- Light – Turn the main light On/Off.
- Settings – Access further controls.
- Lock – Secure your eScooter against unauthorized access.
- Connection – Discover and pair your eScooter to your smart device.
- Riding mode – Toggle between riding modes
- Trip info – View the latest trip information.
- Cruise control – Quickly toggle this option On/Off.
Settings
- Unit – Change the unit of measurement used to display your speed from km/h to mph.
- Cruise control – Maintain a constant speed for those longer journeys.
- Riding mode – Choose your preferred speed preset (options vary depending on the model).
- Speed limiter – Control how fast the scooter can go if being used by children.
- Zero start – Enable the option to start your scooter from the stationery position (enabling this option can reduce battery range).
Trip info
- View your scooter’s latest trip information, anything from total driving time to voltage and power statistics.
- The device firmware can also be upgraded by the user from this menu (internet connection required.
Maintenance and Warranty
Standpipe shake
Should your scooter’s standpipe develop a slight shake over time, it may be
necessary to tighten the two folding mechanism screws, using the M3 hex key.
Brake adjustment
To tighten the brakes, simply insert the M5 hex key into the slot and turn
counterclockwise to release the pressure plate screw. Return the brake line to
make the exposed tail length slightly longer, then lock the pressure plate
screw. If the brakes are too tight, release the pressure plate screw again and
pull the brake cable to make the exposed tail length slightly shorter, then
lock
Fine-tuning loose or tight brakes
The brakes can be fine-tuned by hand. Turn the screw counterclockwise to
tighten the brakes and clockwise to loosen them.
Cleaning and storage
Use a soft cloth dipped in a small amount of water to wipe the eScooter; for
any difficult-to-clean areas, you can use toothpaste and gently brush with a
toothbrush, then use a damp cloth to clean. Do not use alcohol, petrol,
kerosene, or other corrosive, volatile chemical cleaning solvents, as this
will seriously damage the appearance and internal structure of the body. Do
not use pressure washers to clean. Ensure that the charging cable has been
unplugged and the rubber stopper on the charging port is closed. Otherwise,
there may be a chance of electric shock or serious failure due to internal
water intake.
Warranty Policy
techtron® offers a one-year guarantee on rechargeable batteries. Two-year
guarantee against parts and/or manufacturing defects, Terms &
Conditions/Exclusions apply, please see website for further details.
Product Registration
For exclusive offers, product support, and information on the latest techtron®
innovations, register your product by completing the form on the website with
your serial number and details – https://techtron.co/pages/warranty
Battery maintenance and disposal
Do not touch the battery contacts, and do not open or expose the shell. Avoid
metal objects touching the battery contacts, as this will cause a short
circuit, damage to the battery, or even personal injury. Please refer to the
model specifications in this manual for your scooter’s charging requirements.
Only use a charger with the correct voltage otherwise there will be a risk of
damage to components or fire. Ensure batteries are disposed of responsibly.
Recharge the battery and store it after use, in order to preserve battery
life. Do not place the battery in high temperatures higher than 50°C or below
-20°C, or it may lead to battery failure, overheating, or even risk of fire.
Always store in a cool dry place fully charged. A battery will be at optimum
performance at standard room temperature. The warranty may be invalid if the
battery is removed. This marking indicates that this product should not be
disposed of with other household wastes throughout the EU. To prevent possible
harm to the environment or human health from uncontrolled waste disposal,
recycle it responsibly to promote the sustainable reuse of material resources.
To return your used device, please use the return and collection systems or
contact the retailer where the product was purchased. They can take this
product for environmentally safe recycling.
Rider Guidance, Safety, and Specifications
Helmets and clothing
Wearing cycle helmets are recommended when riding an eScooter, but they are
not a legal requirement. Always make sure that your cycle helmet conforms to
current regulations, is the correct size, and is securely fastened. Wear
light-colored or fluorescent clothing so that other road users can see you at
night or whenever visibility is poor.
As with any vehicle, the faster the user is traveling, the more braking
distance is required. Please respect pedestrians’ right of way when riding the
techtron® eScooter.
Riding safely
Please check the eScooter before riding. Check for loose parts and general
tire wear and tear. Always start the eScooter by pushing off with your foot
first, this reduces the start load on the motor, ensuring a longer battery
life. The techtron® eScooter is designed to perform best on smooth dry
surfaces, therefore avoid riding on uneven gravel, sand, grass, slick or wet
surfaces. Never ride over curbs or jump. The scooter is not designed for this
type of riding and any damage caused to the eScooter while riding in this
manner will void the warranty. techtron® accepts no liability for any injuries
caused to the rider or damage to property that may arise while riding the
scooter. Never ride the scooter with more than one person, as this may lead to
loss of control. It is the rider’s responsibility to ensure they comply with
all local laws and regulations that may apply while riding the scooter.
For any inquiries regarding maintenance, accessories, security or warranty,
please visit the electron website: www.techtron.co
or email us: info@techtron.co
Rules of the road and licensing guidance
For the latest up-to-date safety, licensing guidance, and rules of the road
for UK scooter users, please consult the UK Government website:
www.gov.uk/guidance/e-scooter-trials-guidance-
for-users
Troubleshooting
Error codes and what they mean
Faults with techtron® eScooters rarely happen, but if you’re unfortunate
enough to encounter a problem, just cross-reference the error code shown on
the scooter’s display panel with the ones listed in the table opposite. If the
fault can’t be resolved through simple troubleshooting and providing your
scooter is in warranty, then get in touch with our customer services team. Let
us know the error code displayed on your scooter, or give us an idea of the
problem you’re having and we’ll do our very best to get you back up and riding
as soon as possible.
Product Registration
For exclusive offers, product support, and information on the latest techtron®
innovations, register your product by completing the form on the website with
your serial number and details:
https://techtron.co/pages/warranty
For further information and advice you can find us at:
- techtron® Unit 2, Jowett Street,
- Bradford, BD1 2JX. The UK.
- e: info@techtron.co t: 01274 307310 w: techtron.co
- Research & Development 2100 Geng Road, Suite 210,
- Palo Alto, California, 94303 USA.
- e: info@techtroncalifornia.com w: techtroncalifornia.com
- techtron® is a division of Multibrands International Ltd.
References
- techtron® electric scooters
- techtroncalifornia.com
- E-scooter trials: guidance for users - GOV.UK
- techtron® electric scooters
- Warranty – techtron
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>