Feit LVSL24-12-REM Remote Controller Instruction Manual
- June 12, 2024
- Feit
Table of Contents
Feit LVSL24-12-REM Remote Controller
Remote Controller
Product Parameters
- Model No :LVSL24-12/REM
- power supply : DC 3V(1*3V Size“CR2025” Battery)
- Product size : L86 xW40 xH7mm
- Working environment: indoor
- Working temperature: – 1 0 C – 45 ℃ (140 F – 113 F )
- Humidity : <80% R H
Warranty instructions
The one-year warranty on our products is only applicable to all operations that conform to the instructions. The warranty does not include the following: deletion or scribbled
- Any change, amendment, deletion, or scribbled purchase labels or instructions.
- Failure due to damage, and misuse.
- Because of the natural environment rather than the inherent causes of the product (such as lightning, flood, etc.). The bad phenomena of fire, etc.
- The product has been opened or disassembled.
- Adverse consequences arising from use, maintenance, or custody do not conform to product specifications (e. g. damp, corrosive).
- Any other matter caused by a product defect, appearance distortion, appearance damage external force, or Physical injury.
NOTE
- Do not use in humid, high-temperature environments.
- Please don’t use this product in bed.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user s authority to operate the equipment.
Product Usage Instructions
- Remove the battery cover on the back of the remote controller.
- Insert a 3V CR2025 battery into the compartment, following the correct polarity.
- Replace the battery cover securely.
- Point the remote controller towards the device you wish to control.
- Press the appropriate buttons on the remote to operate the device.
- Ensure to use of the remote controller within the specified temperature range for optimal performance.
FAQ (Frequently Asked Questions)
Q: How do I change the battery in the remote controller?
A: To change the battery, follow these steps:
- Remove the battery cover on the back of the remote controller.
- Insert a new 3V CR2025 battery into the compartment, ensuring correct polarity.
- Securely replace the battery cover.
Q: Can I use the remote controller outdoors?
A: No, the remote controller is designed for indoor use only. Operating
it outdoors may affect its performance and durability.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>