Yongkang WS-501 Musical Boxing Pro Machine User Manual
- June 12, 2024
- Yongkang
Table of Contents
Yongkang WS-501 Musical Boxing Pro Machine User Manual
Yongkang WS-501 Musical Boxing Pro Machine
BPorxiongdisuacfitghItningtrspoordt iun wchtiicoh tnwo opponents of equal
physique and ability cover their fists with gloves Head to head combat, it is
both an amateur and a professional sports activity ,During boxing training,
boxing targets are usually used to train the athlete’s speed and strength,Due
to the fleeting gap between opponents in boxing matches, it is more important
than strength training ,It is the player’s ability to respond to attacks and
defenses, and the product is guided by electronically controlled lighting
To train people’s reaction ability, using sound effects to indicate
whetherthey are accurately hitting the target point,So as to efficiently
exercise a
Parameter
person’s overall coordination and sensing abilities.
Product Name: Musical boxing pro
Power: 5W
Working voltage: 3.7V
Product size: 40 40 6.2cm
Product net/gross weight: 2kg/2.5kg Rated input: 5V
Charging instructions
Using power supply equipment (self provided): Input 100-240V, output 5V Charge by connecting it to the power cord. When installing boxing targets, consideration should be given to the location close to the wall socket. The distance between the socket and the machine interface should not exceed.
Operating instructions
- Press and hold for 3 seconds to turn on or off the device
- After turning on, short press the adjustment mode from P1P7 to adjust a total of 7 modes
- +keys to adjust music volume
- Bluetooth can be connected immediately upon startup, and disconnected upon shutdown
Installation instructions
-
The first installation method is to peel off the adhesive attached to the back of the machine and directly attach it to the device to be installed Position: Divide the back of the adhesive into several sections, and choose the adhesive model according to the desired position
Surrounding, metaphorically referring to a ceramic tile surface, the outermostlayer – a circle – is sufficient. (As shown in Figure 1) -
The second installation method is to tear off the Velcro needle surface of the accessory and directly stick the sticker onto the machineOn the back. Pay attention to the parallel direction of the machine when pasting. (As shown in Figure 2)
-
Glue the Velcro needle surface and the rough surface together, find the corresponding position on the wall, determine the position, and tear it off Stick the sticker behind the rough surface to the (As shown in Figure 3)
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that
interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Warning: changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment
The devices has been evaluated to meet general RF exposure requirement, the
device can be used in portable exposure condition without restriction
Read More About This Manual & Download PDF:
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>