YongKang Sumeide Industry And Trade Co Ltd AO-K8 AOKDA Electric Balance Bike User Manual

YongKang Sumeide Industry And Trade Co Ltd AO-K8 AOKDA Electric Balance

Bike

Specifications

• Model: AO-K8
• Tire Size: 12 inch
• Battery: 24V/5.2Ah
• Tyre Type: Air tires
• Power: 180W
• Charging time: 3~3.5 hours
• Light: Fantasy Lights
• Frame Material: Magnesium alloy
• Max Speed: 12KM/H
• Net Weight: 6.7KG
• Range: 10-15KM
• Gross Weight: 9.5KG
• Max Load: 40KG
• Package Size: 771839cm
• Brake: Rear power-off brake
• Adapter: Input 100-240 V 50/60Hz 1A, Output 25.2 V 1AMax

Product Installation

1. Remove the Electric Balance Bike from the packaging box.
2. Remove the bearing screws.
3. Insert the bearing screws into the corresponding holes in the front tire
4. Install matching bearings and screws in sequence.
5. Lift the body and put the front fork on the bearing screw.
6. Use the tool to tighten the left and right screws.
7. Prepare the handles.
8. Place the handlebars into the corresponding lock mouth.
9. Use a tool to tighten the screws at the lock opening to secure the handlebars.
10. Align the connections on the throttle and brake cable connectors.
11. Tighten the seat screws.
12. Assembly completed.

Power On & Functional Operation

• Please wear a helmet and protective gear before cycling, and ensure that all functions of the Electric Balance Bike are normal before starting your cycling.
• Press the power button to switch it on.
• Press and hold the red brake, then press the black accelerator twice continuously to switch.

Scan the QR Code Or Enter the URL for Online Installationhttps://www.youtube.com/watch?v=CRHN9hgy1iw

Read This Manual Before Using
Why Is It Necessary To Read This Manual Before Operating?

1. This manual was written to help you understand the proper use and maintenance of the AOKDA line of Electric Balance Bike.
2. It is important to understand the functions and features of the new AOKDA before operating it as it will allow you to enjoy it from every ride.

Disclaimer & Warning
During the cycling process, comprehensive safety measures should be taken, and risk awareness and good judgment should be maintained at all times to avoid injuries as much as possible.

• The responsibility for AOKDA maintenance is yours! Proper and frequent maintenance will reduce the risks of injuries.
• Please wear a helmet, protective gear, and other safety measures when reading.
• Always follow local laws and regulations.
• Do not perform stunts, spins, or jumps; if you insist on doing these dangerous actions, please take full protective measures.

Product Details

1. Handle

2. Fixed fastener

3. Battery box

4. Sidelights
   Product Details

5. Front fork

6. Front-wheel

7. Power on button

8. Foot pedal

9. Saddle

10. Reflector

11. Charging port

12. Motor

13. Rear wheel

14. Accelerator

15. Brake

Product Parameters

The weight of the tester is 35kg, and the range of the flat road test is 10-15km. The length of the range depends on the weight of the rider, the riding conditions, and the temperature; If the weight of the cyclist exceeds 35kg, the road conditions are rough, and the temperature is low, the range will be correspondingly shortened.

Products & Accessories

Product Installation

1. Remove the Electric Balance Bike from the packaging box

2. Remove the bearing screws

3. Insert the bearing screws into the corresponding holes in the front tire

4. Install matching bearings and screws in sequence

5. Lift the body and put the front
   fork on the bearing screw

6. Use the tool to tighten the left and right screws

7. Prepare the handles

8. Place the handlebars into the 08 corresponding lock mouth

9. Use a tool to tighten the screws at the lock opening to secure the handlebars

10. Aligning the “→” connections on the throttle and brake cable connectors

11. Tighten the seat screws

12. Assembly completed

Power On & Functional operation

Please wear a helmet and protective gear before cycling, and ensure that all functions of the Electric Balance Bike are normal before starting your cycling.

• Press the power button to switch it on
• Press and hold the red brake , then press the black accelerator twice continuously to switch the speed(the speed is only 2 gears), and you will hear the “drip, drip” sound after the speed switch is successful.
• Press the power button, the vehicle is at rest, and only press the black accelerator on the right side to switch the color light mode of the light, while making a “drip” sound.
• At the end of the ride, press the power button to switch off the power.

Safe Driving Warning

Certain countries or regions require safety devices or gear. It is your responsibility to know the state laws and follow them. However, we strongly recommend safety gears to be adorned before the device.

• TIRE AIR PRESSURE: THE TIRE IS PRESSURIZED TO THE STANDARD VALUE ON THE TIRE SAFETY GEAR
• Helmet : The most common and serious injuries from riding are head injuries. This can be prevented by wearing a helmet. You must wear a helmet when riding the AOKDA Electric Balance Bike. The helmet must be worn according to their instruction.

MECHANICAL SAFETY

Before using the AOKDA Electric Balance Bike:

1. Always perform a visual inspection of all screws and nuts that are tight and in place. If anything is amiss or missing and you are unsure, please contact the seller to confirm safety before use.
2. Check the tyres and wheels and that it is not showing signs of wear and tear; Always ensure that the brake mechanism is not touching the wheels and allows free spinning.
3. Always perform mechanical checks of brakes and other parts of the Electric BalanceBikethat allow visibility, safety, and functionality of the Electric Balance Biketo.

RIDING SAFETY

1. Put your feet on the ground.
2. Press the throttle finger paddle ,a n  push the booster forward with both feet, and the Electric Balance Bike accelerates, keep balance, and then puts both feet on the balance board.
3. Release the accelerator to slow down the Electric Balance Bike and press the brake to stop the Electric Balance Bike.
4. Do not ride in the rain.
5. Please slow dbefore speedmppotholeshole,s and other uneven surfaces.
6. Do not accelerate downhill.
7. Do not hang heavy objects such as backpacks on the handlebars.
8. Do not ride on the roadways.
9. Do not turn suddenly at high speed.
10. No riding to water above 2cm.
11. Do not release the handlebars in riding!
12. No riding upstairs or downstairs!

Battery & Charging

BATTERY

• Do not charge indoors.

• Do not turn on and operate the Electric Balance Bike while charging.

• Keep the battery away from children, pets, or direct heat.

• Do not expose the battery to high temperatures and pressure.

• Please use the charger included with the Electric Balance Bike for charging.

• Please do not throw away batteries at will to avoid polluting the environment.

• Do not store the Electric Balance Bike over a long period with an almost empty battery.

• From time to time, discharge the battery by riding. Have the battery recharge again and make sure to not leave the battery fully empty. Do not charge if the Electric Balance Bike has the following conditions:

• The battery leaks.

• The battery is damaged.

• The battery heats up or is deformed.

• The bottom or overall of the deck overheats.

The use, storage, or charging of the battery outside specified limits may result in the annulment of the warranty, battery damage, and effective battery charging.

First Charge
It is important to fully charge the battery before your first use of the Electric Balance Bike.

Your Electric Balance Bike’s battery comes with these built-in features:

1. Balanced charging protection: During charging, the battery automatically balances the voltage among the internal cells to protect each cell.
2. Over-charging protection: The battery stops charging automatically when full to protect against damage.
3. Over current protection: The battery automatically stops charging if the voltage is higher than the prescribed voltage to protect the battery.
4. Over-discharging protection: The battery automatically stops discharging when its voltage drops below the Under voltage value to protect the battery.
5. Short-circuit protection: the battery automatically stops output in the case of a short-circuit.

How to charge

1. Do not charge indoors.
2. Ensure that the Electric Balance Bike is TURNED OFF. Connect the external power charger to the Electric Balance Bike.
3. Connect the charger to an electrical outlet, then turn on the power of the electrical outlet.
4. Do not charge the batteries in temperatures below 5 °C or above 40 °C. The battery may stop the charging process.
5. The charger lights up RED- The battery is charging. The charger lights up GREEN – The battery is fully charged.
6. After the battery is fully charged, please unplug the charger in time.

After Sales
Dear customer,
Thank you for choosing our product! To ensure that you can install and use our product smoothly, we strongly recommend that you visit our official website to view the related video installation tutorials and after-sales parts replacement videos. On our official website, you can find detailed video tutorials that guide you on how to correctly install and use our product. In addition, we also provide after-sales parts replacement videos to ensure that you can correctly perform the replacement when needed. We hope these videos will help you better understand and use our product. If you still have questions or concerns after watching the videos, please feel free to contact our customer service team, and we will be happy to assist you. Thank you again for your purchase and support!

Wishing you a pleasant user experience!

• AOKDA
  https://www.aokda.com

• YouTube
  https://www.youtube.com/@AokdaBrand

Limited Warranty

BY USING THIS PRODUCT YOU AGREE TO THIS LIMITED WARRANTY. PLEASE READ THIS LIMITED WARRANTY CAREFULLY.

To benefit from the limited warranty, the customer is advised to read AOKDA Warranty terms together with the “care and maintenance” sections provided in the user manual. This limited warranty applies to the extent permitted by law and unless restricted or prohibited by law.

Attentions for warranty Faults caused by any of the following causes are not within the scope of the warranty:

1. Failed to maintain according to this user manual.
2. Product damage or defects caused by improper driver operation.
3. Damage caused by misuse, traffic accident, or accidental collision.
4. Damage caused by riding on abnormal roads or accidental collision.
5. Damage oftohe vehicle caused by natural disaster or irresistible force.
6. Products wthathave had their serial numbers removed or tampered with.
7. Defects or malfunctions of the product not notified by the customer during the Warranty Period.
8. Products used for commercial purposes including but not limited to leasing/hiring, use in competitions, etc.
9. Performing high-risk actions such as stunts, spinning, or jumping leads to rapid aging or malfunction of the product.
10. Expose this product under the blazing sun or outdoors for a long time, as that will speed up the aging process of the product and cause malfunction.
11. Defects or damages from improper storage, exposure to moisture or dampness, modifications, connections, repairs (except as carried out by AOKDA or its authorized centers), misuse, neglect, abuse, accident, alteration, improper installation, or other acts which are not the fault of AOKDA, including damage caused by dropping, blown fuses, liquid entering the interior of the product.

PLEASE ALWAYS KEEP THE BOX FOR ANY POSSIBLE FUTURE AFTER-SALES SHIPMENT

Warranty Card

Dear user, Thanks for using our electric Electric Balance Bike. Please fill in the form below clearly for the sake of better after-sale services.

User

| Name|  | Workplace|
Tel|
Add|
Date of Purchase|  | Serial number|
Model|  | VIN|
Invoice Number|  | Battery serial number|

Distributor

| Name|
Contact|
Note

Shenzhen Jiachebao Technology Co., Ltd.

• Address : Room 505,5th Floor, Building A, Liuwei Business Center, No.5, Longjing Community, Bantian Street, Yangmei Community, Longgang District, Shenzhen
• WhatsApp : +8613612953725
• Customer support : support@aokda.com
• Official website: www.aokda.com

FCC Caution.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

*RF warning:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 0cmbetween the radiator & your body. The FCC certification of this device refers to RF exposure testing performed in typical operating conditions, where a person is no closer than 0 centimeters from the device surface at all times, except for non-repetitive patterns with transient time intervals in the order of a second. Only in the stated conditions, the device is shown to fully comply with the FCC RF Exposure requirements of KDB 447498.

FAQ

Q: How do I charge the battery?
A: To charge the battery, use the provided charger and plug it into a power source. Make sure to follow the recommended charging time mentioned in the specifications.

Q: What is the maximum weight capacity of the Electric Balance Bike?
A: The maximum load capacity is 40KG as per the specifications.

Q: How do I adjust the speed?
A: The speed of the Electric Balance Bike is controlled by the accelerator. Press gently for slower speeds and further for faster speeds.

References

• Enjoy your ride with iENYRID Electric Scooters – aokda
• Enjoy your ride with iENYRID Electric Scooters – aokda

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>