ELECTRON TECHNOLOGY WF2135T Android Tablet User Manual

ELECTRON TECHNOLOGY WF2135T Android Tablet

Product Information

Specifications

• 21.5″ LCD full HD panel
• Resolution: 1920 x 1080
• RK3588 Quad core cortex A55 + Quad core cortex A76
• RAM: 4GB (Optional 8GB)
• Internal memory: 32GB (Optional 64GB)
• Operating System: Android 12
• 10-Point capacitive touch screen
• RJ45 Ethernet
• WiFi 802.11a/b/g/n/ac/ax (WiFi6)
• Bluetooth 5.2
• HDMI input
• USB for serial (TTL Level)
• USB 2.0 host *3
• Type C SD, Support up to 64GB
• 4G LTE (Optional)
• 2 * 3W Speaker
• VESA: 100x100mm

Product Usage Instructions

Installation Instructions:

1. Plug the power cable into the device’s power port.
2. Fix the device in place after aligning the port cover.
3. Install the port cover by screwing it in.
4. Mount the wall mount kit on the wall and secure it with screws.
5. Align the device with the wall mount kit and secure it in place.
6. Connect the power charger to a socket, and the device will start up.

FCC Statement:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.

Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Disposal Information:
The symbol on the product or in the instructions indicates that your electrical and electronic equipment should be disposed of separately from household waste at the end of its life. Please use the separate collection systems for recycling available in your country. For more details, contact local authorities or the retailer where you purchased the product.

FAQ

• Q: How do I connect to WiFi?
  A: To connect to WiFi, go to Settings > WiFi, select your network, and enter the password if required.

• Q: Can I expand the internal memory?
  A: Yes, you can expand the internal memory using a compatible SD card up to 64GB.

Important Notices

Copyright Information
All intellectual property rights in this publication are owned by and protected by applicable copyright laws and international treaty provisions. retains all rights not expressly granted. No part of this publication may be reproduced in any form whatsoever or used to make any derivative work without prior written approval by . Reserves the right to revise this publication, and/or make improvements or changes in the product(s) and/or the program(s) described in this documentation at any time without prior notice. The information in this document is provided in good faith, but without any representation or warranty whatsoever, whether it is accurate,or complete or otherwise, and on express understanding that shall have no liability whatsoever to other parties in any way arising from or relating to the information or its use. All other trademarks are the property of their respective owners. Other company and brand products and service names are trademarks or registered trademarks of their respective holders.

This device complies with CE and FCC regulations.

1. Do not push objects into holes and ventilation slots.
   • Do not expose this product to moisture or place any objects fil ed with liquids on or near the product.
   • Do not place a naked flame sou ce, such as lighted candles, on or near this product.
   • Do not store or operate the device in environments where the temperature is above 50 degrees celsius or below -10 degrees celsius.
   • Do not intentionally hit the device or place heavy or sharp objects on the device.
   • Only use accessories specified by the manu acturer.
   • Keep the device away from benzene, diluents, and other chemicals.
   • Do not attempt to repair this product yourself. Always use a qualified se vice agent to perform adjustments or repairs.

Package Contents

Please make sure all of the following are present when you unpack your Android Interactive Digital Signage.

FEATURES

• 21.5″LCD full HD panel
• Resolution:1920*1080
• RK3588 Quad core cortex A55+Quad core cortex A76 RAM 4GB / Optional 8GB
• Internal memory 32GB / Optional 64GB
• Android 12
• 10-Point capacitive touch
• RJ45 Ethernet
• WiFi 802.11a/b/g/n/ac/ax (WiFi6)
• Bluetooth 5.2
• HDMI input
• USB for serial (TTL Level )
• USB 2.0 host*3
• Type C
• SD,Support up to 64GB
• 4G LTE (Optional)
• 2*3W Speaker
• VESA:100x100mm

21.5″ Exterior Components

Installation instructions

1. Plug the power cable into port of device.
2. Fix the device after aligning the port cover.
3. Install port cover when screw in.
4. Install the wall mount kit on wall and screw in.
5. Align the device on the wall mount kit and fix it.
6. Put the power charge into socket and the device will start up.

FCC STATEMENT

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. (1) This device may not cause harmful interference, and
2. (2) This device must accept any interference received, including interference that may cause undesired operation.

Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect th e equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

This symbol on the product or in the instructions means that your electrical and electronic equipment should be disposed of at the end of its life separately from your household waste. There are separate collection systems for recycling in your country. For more information, please contact the local authority or the retailer where you purchased the product.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>