ELECTRON TECHNOLOGY E0051 10.1 Inch Smart Photo Frame User Manual
- May 15, 2024
- ELECTRON TECHNOLOGY
Table of Contents
10.1”Smart Photo Frame
User Manual
Important Notices
Copyright Information
All intellectual property rights in this publication are owned by and
protected by applicable copyright laws and international treaty provisions.
retains all rights not expressly granted. No part of this publication may be
reproduced in any form whatsoever or used to make any derivative work without
prior written approval by . Reserves the right to revise this publication,
and/or make improvements or changes in the product(s) and/or the program(s)
described in this documentation at any time without prior notice. The
information in this document is provided in good faith, but without any
representation or warranty whatsoever, whether it is accurate,or complete or
otherwise, and on express understanding that shall have no liability
whatsoever to other parties in any way arising from or relating to the
information or its use.
All other trademarks are the property of their respective owners. Other
company and brand products and service names are trademarks or registered
trademarks of their respective holders.
This device complies with CE and FCC regulations.
1)Do not push objects into holes and ventilation slots.
Do not expose this product to moisture or place any objects fil ed with
liquids on or near the product.
Do not place a naked flame sou ce, such as lighted candles, on or near this
product.
Do not store or operate the device in environments where the temperature is
above 50 degrees celsius or below -10 degrees celsius.
Do not intentionally hit the device or place heavy or sharp objects on the
device.
Only use accessories specified by the manu acturer.
Keep the device away from benzene, diluents, and other chemicals.
Do not attempt to repair this product yourself. Always use a qualified se vice
agent to perform adjustments or repairs.
Package Contents
Please make sure all of the following are present when you unpack your Smart Photo Frame
Product Specifications
Specifications vary by model configuration.
System | CPU | RK3126 Quad-core Cortex-A7 |
---|---|---|
RAM | 1GB | |
Memory | 32GB | |
Operating System | Android 7 | |
Specifications | Display | 10.1-inch |
Resolution Aspect Ratio | Resolution: 1280*800 |
Aspect Ratio:16:10
Touchscreen| Incell 10-point touch
Wi-Fi| 802.11 b/g/n
Interfaces| Type-c| USB2.0 support slave
Card slot| SD card
DC In| Adapter,12V/1.5A
Media play| Video format| MPEG-1,MPEG-2,MPEG-4,H.265,H.264,VC-1,
VP8,VP9, etc., Supports up to 4K videos
Audio format| MP3/WMA/AAC etc.
Photo| jpeg
Others| Speaker| Power/Light Bar Switch
Buttons| 2*2W
LED light strip| RGB
Working Temperature| 0℃—45℃ 10~90%RH
Exterior Components
Getting Started
Step 1
Insert the stand into the hole on the frame Step 2
Insert power cord firmly
FCC STATEMENT :
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions,may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator & your body.
**** This symbol on the product or in the instructions means that your electrical and electronic equipment should be disposed of at the end of its life separately from your household waste. There are separate collection systems for recycling in your country. For more information, please contact the local authority or your retailer where you purchased the product.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>