Shenzhen Electron Technology WA1042T Meeting Room Interactive Digital Signage User Manual
- June 5, 2024
- Shenzhen Electron Technology
Table of Contents
- Shenzhen Electron Technology WA1042T Meeting Room Interactive Digital
- Important Notices
- Package Contents
- Features
- 10.1″ Exterior Components
- 13.3 Exterior Components
- 15.6″ Exterior Components
- Installation instructions for a wall hanging
- FCC STATEMENT
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Shenzhen Electron Technology WA1042T Meeting Room Interactive Digital
Signage
Important Notices
Copyright Information
All intellectual property rights in this publication are owned by and
protected by applicable copyright laws and international treaty provisions.
retains all rights not expressly granted. No part of this publication may be
reproduced in any form whatsoever or used to make any derivative work without
prior written approval by. Reserves the right to revise this publication,
and/or make improvements or changes in the product(s) and/or the program(s)
described in this documentation at any time without prior notice. The
information in this document is provided in good faith, but without any
representation or warranty whatsoever, whether it is accurate.or complete or
otherwise, and on express understanding that shall have no liability
whatsoever to other parties in any way arising from or relating to the
information or its use. All other trademarks are the property of their
respective owners. Other company and brand products and service names are
trademarks or registered trademarks of their respective holders. Do not push
objects into holes and ventilation slots. Do not expose this product to
moisture or place any objects fil ed with liquids on or the product. Do not
place a naked flame sou ce, such as lighted candles, on or near this product.
Do not store or operate the device in environments where the temperature is
above 50 degrees celsius or below -10 degrees celsius. Do not intentionally
hit the device or place heavy or sharp objects on the device. Only use
accessories specified by the manu acturer. Keep the device away from benzene,
diluents, and other chemicals. Do not attempt to repair this product yourself.
Always usea qualified se vice agent to perform adjustments or repairs.
Package Contents
Please make sure all of the following are present when you unpack your MEETING R0OM INTERACTIVE DIGITAL SIGNAGE
Features
- 10.1″LCD panel resolution1 280 800/13.3″ 15.6’LCD panel resolution 1920*1080
- RK3288 Quad core cortex A 17, RK3399 Dual-core A72+quad-core A53,
- RK3566/3568 Quad core cortex A55
- RAM 2GB
- Internal memory 16GB
- Android 8.1/10.0(3288), Android 7.1/9.0/10.0(3399),
- Android 11(3566/3568)
- 10-Point capacitive touch
- 2.0M/P,5M/P, front camera
- .Bluetooth 4.0
- WiFi 802.11b/g/n
- RJ45 ethernet with POE
- SIM card (Optional)
- SD card
- USB host
- USB for serial(RS232 format)
- Micro USB OTG
- POE IEEE802.3at, POE+,class 4, 25.5W
- 3.5mm earphone + micphone
- NFC 13.56MHz, ISO14443A/NSO14443B/ISO 15693/Mifare classic/
- Sony felica (Optional)
- 21.5W speaker
- VESA: 75x75mm(10.1″ 13.3″)/ VESA: 100x100mm(15.6″)
- LED Light bar, RGB
- Adapter:12V/1.5A(10.1″ 13.3″)/Adapter:12V/2A(15.6″)
10.1″ Exterior Components
13.3 Exterior Components
15.6″ Exterior Components
Installation instructions for a wall hanging
This symbol on the product or in the instructions means that your electrical and electronic equipment should be disposed of at the end of its life separately from your household waste. There are separate collection systems for recycling in your country. For more information, please contact the local authority or your retailer where you purchased the product.
FCC STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: This device may not cause harmful interference, and This device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator & your body.