Shenzhen Electron Technology WH1332T Android Tablet User Manual
- June 6, 2024
- Shenzhen Electron Technology
Table of Contents
Shenzhen Electron Technology WH1332T Android Tablet
Important Notices Copyright Information
All intellectual property rights in this publication are owned by and protected by applicable copyright laws and international treaty provisions. retains all rights not expressly granted. No part of this publication may be reproduced in any form whatsoever or used to make any derivative work without prior written approval by . Reserves the right to revise this publication, and/or make improvements or changes in the product(s) and/or the program(s) described in this documentation at any time without prior notice. The information in this document is provided in good faith, but without any representation or warranty whatsoever, whether it is accurate,or complete or otherwise, and on express understanding that shall have no liability whatsoever to other parties in any way arising from or relating to the information or its use. All other trademarks are the property of their respective owners. Other company and brand products and service names are trademarks or registered trademarks of their respective holders.
- Do not push objects into holes and ventilation slots.
- Do not expose this product to moisture or place any objects fil ed with liquids on or near the product.
- Do not place a naked flame sou ce, such as lighted candles, on or near this product.
- Do not store or operate the device in environments where the temperature is above 50 degrees celsius or below -10 degrees celsius.
- Do not intentionally hit the device or place heavy or sharp objects on the device.
Only use accessories specified by the manu acturer. Keep the device away from benzene, diluents, and other chemicals. Do not attempt to repair this product yourself. Always use a qualified se vice agent to perform adjustments or repairs. This product is a desktop product, people will not just use it in their hands.
Package Contents
Please make sure all of the following are present when you unpack your MEDICAL INDUSTRY DIGITAL SIGNAGE
Exterior Components
| No | Function | No | Function |
|---|---|---|---|
| 1 | Camera | 9 | Volume – |
| 2 | Light sensor | 10 | Mic |
| 3 | Shield for camera | 11 | RJ45-with POE |
| 4 | NFC card reader | 12 | 3.3V/GND |
| 5 | Home | 13 | GND/TX/RX |
| 6 | 3.5mm earphone with Mic | 14 | DC in power supply port |
| 7 | Power | 15 | VESA:100*100mm |
| 8 | Volume + | 16 | Speaker |
Features
- LCD IPS panel
- 13.3″resolution1920*1080
- Quad core cortex A17,1.8G
- RAM 2GB
- Internal memory 16GB
- Android 5.1/8.1
- 10-Point capacitive touch
- 2.0M/P,front camera
- Face recognition front camera (optional) Support NFC card reader (optional) Bluetooth 4.0
- WiFi 802.11b/g/n
- RJ45 ethernet with POE
- Serial port
- Microphone
- Micro USB OTG
- 2*2W Speaker
- VESA:100*100mm
- Adapter:12V/2A
This symbol on the product or in the instructions means that your electrical and electronic equipment should be disposed of at the end of its life separately from your household waste. There are separate collection systems for recycling in your country. For more information, please contact the local authority or your retailer where you purchased the product.
FCC STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1)This device may not cause harmful
interference, and (2)This device must accept any interference received,
including interference that may cause undesired operation. Warning: Changes or
modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator & your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>